Specifications

an important step so do not overlook it.
Thanks to the forum and its members for much of the info in this DIY post!
Note: I was just alerted by member Paulct that the axle drain plug on 2005 models (at least
on his 2005) sits above the leaf spring so that you cannot get an allen wrench straight in from
below. The spring is in the way. An L-shaped allen wrench tool must be used so that it can be
pivoted above the leaf spring. On my 2006 model, the spring is NOT in the way of the plug and
you can easily get an allen socket straight into the plug from below. (see photos below) So if
you have an `06 or newer C6, you will only need a good allen socket and socket wrench to do
the entire job. If you have an `05 model, you will ALSO need an L-shaped allen tool and most
likely a short piece of small diameter pipe for extra leverage on the L-shaped wrench. Thanks
Paulct for the below "2005" photos.
We suspect this difference in drain plug position has to do with the differential case change
between 2005 and 2006. For more info regarding differential differences between `05 and `06
models, click below link:
http://forums.corvetteforum.com/show...9&forum_id=101