2010 Cadillac CTS/CTS-V Owner Manual M Keys, Doors and Windows . . . 1-1 Keys and Locks . . . . . . . . . . . . . . . 1-2 Doors . . . . . . . . . . . . . . . . . . . . . . . . 1-17 Vehicle Security. . . . . . . . . . . . . . 1-23 Exterior Mirrors . . . . . . . . . . . . . . . 1-26 Interior Mirrors . . . . . . . . . . . . . . . . 1-27 Windows . . . . . . . . . . . . . . . . . . . . . 1-28 Roof . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31 Seats and Restraints . . . . . . . . .
010 Cadillac CTS/CTS-V Owner Manual M Vehicle Care . . . . . . . . . . . . . . . . . . 9-1 General Information . . . . . . . . . . . . 9-2 Vehicle Checks . . . . . . . . . . . . . . . . 9-4 Headlamp Aiming . . . . . . . . . . . . 9-34 Bulb Replacement . . . . . . . . . . . . 9-37 Electrical System . . . . . . . . . . . . . 9-40 Wheels and Tires . . . . . . . . . . . . . 9-58 Jump Starting . . . . . . . . . . . . . . . 9-103 Towing . . . . . . . . . . . . . . . . . . . . . . 9-108 Appearance Care . . . . .
Introduction GENERAL MOTORS, GM, the GM Emblem, CADILLAC, the CADILLAC Crest and Wreath, and the name CTS/CTS-V are registered trademarks of General Motors. This manual describes features that may or may not be on your specific vehicle either because they are options that you did not purchase or due to changes subsequent to the printing of this owner manual. Please refer to the purchase documentation relating to your specific vehicle to confirm each of the features found on your vehicle.
iv Introduction Canadian Vehicle Owners Propriétaires Canadiens A French language copy of this manual can be obtained from your dealer/retailer or from: On peut obtenir un exemplaire de ce guide en français auprès du concessionnaire ou à l'adresse suivante: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 1-800-551-4123 Numéro de poste 6438 de langue française www.helminc.com Using this Manual To quickly locate information about the vehicle use the Index in the back of the manual.
Introduction Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. 9 : Airbag Readiness Light # : Air Conditioning ! : Antilock Brake System (ABS) g : Audio®Steering Wheel Controls or OnStar $ : Brake System Warning Light " : Charging System I : Cruise Control B : Engine Coolant Temperature O : Exterior Lamps # : Fog Lamps .
vi Introduction 2 NOTES
Keys, Doors and Windows Keys, Doors and Windows Doors Windows Trunk (Sedan) . . . . . . . . . . . . . . . 1-17 Liftgate (Wagon) . . . . . . . . . . . . . 1-19 Vehicle Security Keys and Locks Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Remote Keyless Entry (RKE) System . . . . . . . . . . . . . . . . . . . . . . 1-4 Remote Keyless Entry (RKE) System Operation (Key Access) . . . . . . . . . . . . . . . . 1-5 Remote Keyless Entry (RKE) System Operation (Keyless Access) . . . . . . . . . .
1-2 Keys, Doors and Windows Keys and Locks Keys { WARNING Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed if caught in the path of a closing window. Do not leave the keys in a vehicle with children.
Keys, Doors and Windows 1-3 One of the following keys comes with the vehicle. This key is used for the driver door, ignition, and glove box. This key, located inside the keyless access transmitter, is used for the driver door, glove box, and rear seat pass-through door. See “Rear Seat Pass-Through Door” under Trunk (Sedan) on page 1‑17 for more information. This type of transmitter has a thin button (A) near the bottom of the keyless access transmitter.
1-4 Keys, Doors and Windows Notice: If you ever lock your keys in the vehicle, you may have to damage the vehicle to get in. Be sure you have spare keys. Contact Roadside Service if you are locked out of the vehicle. See Roadside Service on page 12‑6. Remote Keyless Entry (RKE) System Notice: If the transmitter does not have a button near the base, do not pull on the chrome base of the transmitter. This type of transmitter does not have a key inside.
Keys, Doors and Windows Remote Keyless Entry (RKE) System Operation (Key Access) The Remote Keyless Entry (RKE) transmitter functions work up to 20 m (65 feet) away from the vehicle. There are other conditions that can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System on page 1‑4. Q (Lock): Press to lock all the doors. If enabled through the Driver Information Center (DIC), the parking lamps may flash once to indicate locking has occurred.
1-6 Keys, Doors and Windows The vehicle comes with two transmitters. Each transmitter will have a number on top of it, “1” or “2”. These numbers correspond to the driver of the vehicle. For example, the memory seat position for driver 1 will be recalled when using the transmitter labeled “1”, if enabled through the DIC. See “Memory Seat” under Power Seat Adjustment on page 2‑4 and Vehicle Personalization on page 4‑51 for more information.
Keys, Doors and Windows Remote Keyless Entry (RKE) System Operation (Keyless Access) To access the rear doors first, pull the rear door handle once to unlock all doors and a second time to open the door. The Keyless Access System transmitter functions will work up to 60 m (195 feet) away from the vehicle. Entering any door other than the driver door will always cause all of the doors to unlock. This is not customizable.
1-8 Keys, Doors and Windows K (Unlock): Press once to unlock only the driver door. The turn signal indicators flash twice. Press K twice within five seconds to unlock all the doors. The interior lamps may come on. With Remote Start Shown, Without Similar Q (Lock): Press once to lock the doors. The turn signal indicators flash. When Q is pressed twice, the turn signal indicators flash twice, and the horn sounds once to confirm locking.
Keys, Doors and Windows The vehicle comes with two transmitters. Each transmitter will have a number on top of it, “1” or “2”. These numbers correspond to the driver of the vehicle. For example, the memory seat position for driver 1 will be recalled when using the transmitter labeled “1”, if enabled through the DIC. See “Memory Seat” under Power Seat Adjustment on page 2‑4 and Vehicle Personalization on page 4‑51 for more information.
1-10 Keys, Doors and Windows 8. Press the ignition control knob to exit programming mode. 9. Remove the transmitter from the transmitter pocket and press K on the keyless access transmitter two times. The procedure requires three, ten minute cycles to complete the matching process. 3. Insert the vehicle key into the key lock cylinder located on the driver door. 1. The vehicle must be off. 4. Turn the key to the unlock position five times within five seconds. 10.
Keys, Doors and Windows 13. A beep sounds once programming is complete. The DIC displays Ready To Learn Electronic Key # 2. To program additional transmitters, insert each transmitter in the pocket until a beep is heard and the DIC advances to the next electronic key number. Up to four transmitters can be programmed. The DIC displays Maximum # Electronic Keys Learned and exits the programming mode. Press the ignition control knob to complete the process. 14.
1-12 Keys, Doors and Windows 3. Insert the new battery, positive side facing down. Replace with a CR2032 or equivalent battery. 4. Snap the transmitter back together. Remote Vehicle Start This vehicle may have a remote starting feature that allows you to start the engine from outside the vehicle. / (Remote Vehicle Start): This button will be on the RKE transmitter if you have remote start.
Keys, Doors and Windows Extending Engine Run Time To extend the engine run time by 10 minutes, repeat Steps 1 and 2 while the engine is still running. The engine run time can only be extended if it is the first remote start since the vehicle has been driven. Remote start can be extended one time. A maximum of two remote starts or remote start attempts are allowed between ignition cycles.
1-14 Keys, Doors and Windows Door Locks { WARNING WARNING (Continued) . Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it. . Outsiders can easily enter through an unlocked door when you slow down or stop your vehicle. Locking your doors can help prevent this from happening. Unlocked doors can be dangerous. .
Keys, Doors and Windows Central Door Unlocking System The vehicle has a central door unlocking feature. When unlocking the driver door, the other doors can be unlocked by holding the key in the turned position for a few seconds or by quickly turning the key twice in the lock cylinder. Power Door Locks On vehicles with power door locks, the switches are located on the front doors. " (Unlock): Press to unlock the doors. Q (Lock): Remove the key from the ignition and press to lock the doors.
1-16 Keys, Doors and Windows Lockout Protection Safety Locks To set the locks: If the power door lock switch is pressed when the key is in the ignition and a door is open, all the doors will lock and only the driver door will unlock. If the doors are closed, they can be locked by using the Remote Keyless Entry (RKE) transmitter. Be sure to remove the key from the ignition when locking the vehicle. The vehicle has rear door security locks.
Keys, Doors and Windows Doors WARNING (Continued) Trunk (Sedan) . Adjust the Climate Control system to a setting that brings in only outside air and set the fan speed to the highest setting. See Climate Control System in the Index. . If the vehicle is equipped with a power liftgate, disable the power liftgate function.
1-18 Keys, Doors and Windows Press the button to open the trunk. You can also press the button with the trunk symbol on the Remote Keyless Entry (RKE) transmitter to open the trunk. With the Keyless Access System, when you have the transmitter, the trunk can be opened by the trunk release button located on the rear of the trunk above the license plate. The vehicle must be in P (Park) and the valet mode turned off.
Keys, Doors and Windows Emergency Trunk Release Handle (Sedan Only) There is a glow-in-the-dark emergency trunk release handle located on the back wall of the trunk. This handle will glow following exposure to light. Pull the release handle toward the front of the vehicle to open the trunk from the inside. Liftgate (Wagon) WARNING (Continued) If the vehicle must be driven with the liftgate, or trunk/hatch open: . Close all of the windows. . Fully open the air outlets on or under the instrument panel.
1-20 Keys, Doors and Windows Use this setting to prevent the liftgate from opening into overhead obstructions such as a garage door or roof mounted cargo during power operation. The liftgate can still be opened fully manually. The switch is located on the driver’s door. The vehicle must be in P (Park) to use the power feature. The taillamps flash when the power liftgate moves. { WARNING You or others could be injured if caught in the path of the power liftgate.
Keys, Doors and Windows . Press the power liftgate button on the center of the mode switch, located on the driver’s door. . Press the touchpad switch on the liftgate outside handle to open the liftgate. Pressing any button that operates the power liftgate, or the touchpad switch while the liftgate is moving, stops it. Pressing the button or RKE switch again reverses the direction. There is a minimum that the power liftgate must already be open for the system to hold it open.
1-22 Keys, Doors and Windows The vehicle has pinch sensors located on the side edges of the liftgate. If an object is caught between the liftgate and the body and presses against this sensor, the liftgate will reverse direction and open fully. The liftgate will remain open until it is activated again or closed manually. Setting the Power Liftgate Intermediate Mode To change the liftgate stop position: 1. Turn the liftgate switch to either the MAX, or the ¾ mode position and power open the liftgate. 2.
Keys, Doors and Windows Vehicle Security Arming the System Vehicle theft is big business, especially in some cities. This vehicle has theft-deterrent features, however, they do not make it impossible to steal. To arm the system, Anti-Theft Alarm System 3. Close all doors. The security light should go off after about 30 seconds. The alarm is not armed until the security light goes off. This vehicle has an anti-theft alarm system.
1-24 Keys, Doors and Windows How to Detect a Tamper Condition Immobilizer Operation (Key Access) If K is pressed and the horn sounds, an attempted break-in has occurred while the system was armed. This vehicle has a passive theft-deterrent system. If the alarm has been activated, the Theft Attempted message will appear on the DIC. See Key and Lock Messages on page 4‑42 for additional information.
Keys, Doors and Windows 1-25 If the engine still does not start with the other key, the vehicle needs service. If the vehicle does start, the first key may be damaged. See your dealer/retailer who can service the theft-deterrent system and have a new key made. 3. After the engine has started, turn the key to LOCK/OFF, and remove the key. Immobilizer Operation (Keyless Access) 4. Insert the key to be programmed and turn it to ON/RUN within five seconds of the ignition being turned to LOCK/OFF in Step 3.
1-26 Keys, Doors and Windows The system has one or more keyless access transmitters that are matched to an immobilizer control unit in your vehicle. Only a correctly matched keyless access transmitter will start the vehicle. If the keyless access transmitter is ever damaged, you may not be able to start your vehicle. When trying to start the vehicle, the security light comes on briefly when the ignition is turned on.
Keys, Doors and Windows Power Mirrors 3. Adjust each outside mirror so that a little of the vehicle and the area behind it can be seen. 4. Press either } or | again to deselect the mirror. Folding Mirrors Manual Controls for the outside power mirrors are located on the driver door. To adjust each mirrors: 1. Press } or | to select the driver or passenger side mirror. 2. Press one of the four arrows located on the control pad to move the mirror to the desired direction.
1-28 Keys, Doors and Windows Automatic Dimming Mirror Operation Automatic dimming reduces the glare of headlamps from behind you. The dimming feature comes on and the indicator light illuminates each time the vehicle is started. Cleaning the Mirror Do not spray glass cleaner directly on the mirror. Use a soft towel dampened with water. Windows { WARNING Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous.
Keys, Doors and Windows WARNING (Continued) killed if caught in the path of a closing window. Do not leave keys in a vehicle with children. When there are children in the rear seat use the window lockout button to prevent unintentional operation of the windows. In addition, each door has a switch for its own window. The front power window switch operates with two positions for both up and down movement and the rear power window switch operates with one position for up and two positions for down movement.
1-30 Keys, Doors and Windows Express Window Anti-Pinch Override { WARNING If express override is activated, the window will not reverse automatically. You or others could be injured and the window could be damaged. Before you use express override, make sure that all people and obstructions are clear of the window path. In an emergency, the anti-pinch feature can be overridden in a supervised mode. Hold the window switch all the way up to the second position.
Keys, Doors and Windows Sun Visors Swing down the visor to block out glare. It can also be detached from the center mount and moved to the side to block glare from that direction. The driver visor may also have buttons for a built-in garage door opener. See Universal Remote System on page 4‑61 for more information. Lighted Visor Vanity Mirror 1-31 Sunroof Press and hold the rear of the switch to open the sunshade. Press and hold the front of the switch to close the sunshade.
1-32 Keys, Doors and Windows Express-Close: To close the sunroof, fully press and release the front of the driver's side switch. The sunroof will automatically close. To stop the sunroof partway, press the switch a second time. The passenger side switch operates the sunroof. Express-Open: To open the sunroof, fully press and release the rear of the passenger side switch. The sunroof will automatically open. To stop the sunroof partway, press the switch a second time.
Seats and Restraints Seats and Restraints Head Restraints Head Restraints . . . . . . . . . . . . . . . 2-2 Active Head Restraints . . . . . . . . 2-3 Front Seats Seat Adjustment . . . . . . . . . . . . . . 2-3 Power Seat Adjustment . . . . . . . 2-4 Lumbar Adjustment . . . . . . . . . . . 2-6 Thigh Support Adjustment . . . . 2-7 Reclining Seatbacks . . . . . . . . . . 2-7 Heated and Ventilated Front Seats . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Rear Seats Rear Seats . . . . . . . . . . . . .
2-2 Seats and Restraints Head Restraints The vehicle's front seats have adjustable head restraints in the outboard seating positions. The vehicle's rear seats have head restraints in the outboard seating positions, but they are not adjustable. { WARNING With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.
Seats and Restraints Active Head Restraints Active Head Restraint System The vehicle has an active head restraint system in the front seating positions. These automatically tilt forward to reduce the risk of neck injury if the vehicle is hit from behind. Front Seats 2-3 To move a manual seat forward or rearward: Seat Adjustment { WARNING You can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving.
2-4 Seats and Restraints Power Seat Adjustment . Power Seats On vehicles with power seats, the controls are located on the outboard side of the seats. . Raise or lower the rear part of the seat cushion by moving the rear of the horizontal control up or down. 1: Saves the seating position for driver 1. Raise or lower the entire seat by moving the entire horizontal control up or down. S: The vertical control is used for reclining the seatback.
Seats and Restraints A single beep will sound. The seat, outside mirrors, and steering wheel will move to the position previously stored for the identified driver. If the Remote Keyless Entry (RKE) transmitter is used to enter the vehicle and the remote recall memory feature is on, automatic seat and mirror movement occur. On vehicles with the Keyless Access System, automatic adjustment occurs when the driver door is opened.
2-6 Seats and Restraints Lumbar Adjustment . Press and hold the bottom of the control to decrease support to the top of the seatback and increase support to the bottom of the seatback. . Press and hold the front or rear of the control to increase or decrease support to the entire seatback. Side Bolster On vehicles with this feature: A. Seat Cushion Bolster Adjustment Switch The vehicle may have this feature.
Seats and Restraints Thigh Support Adjustment Reclining Seatbacks Manual Reclining Seatbacks { WARNING 2-7 If the front passenger seat has a manual reclining seatback, the lever used to operate it is located on the outboard side of the seat. To recline the seatback: You can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
2-8 Seats and Restraints To return the seatback to an upright position: { WARNING 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position. Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. 2. Push and pull on the seatback to make sure it is locked.
Seats and Restraints Heated and Ventilated Front Seats { WARNING Do not have a seatback reclined if the vehicle is moving. If you cannot feel temperature change or pain to the skin, the seat heater may cause burns even at low temperatures. To reduce the risk of burns, people with such a condition should use care when using the seat heater, especially for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket, cushion, cover or similar item.
2-10 Seats and Restraints Rear Seats Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. The vehicle may have a split folding rear seat. Sedan Wagon To lower one or both of the rear seatbacks: To lower one or both of the rear seatbacks: 1.
Seats and Restraints To return a seatback to the upright position: { WARNING If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. 1. Lift the seatback up and push it back into place. 2. Make sure the seatback is locked into place by pushing and pulling on it. 3. Repeat Steps 1 and 3 for the other seatback.
2-12 Seats and Restraints In most states and in all Canadian provinces, the law requires wearing safety belts. Here is why: You never know if you will be in a crash. If you do have a crash, you do not know if it will be a serious one. Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. A few crashes are mild, and some crashes can be so serious that even buckled up, a person would not survive. But most crashes are in between.
Seats and Restraints Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel...
2-14 Seats and Restraints Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. A: You could be — whether you are wearing a safety belt or not.
Seats and Restraints How to Wear Safety Belts Properly This section is only for people of adult size. First, before you or your passenger(s) wear a safety belt, there is important information you should know. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a child will be riding in the vehicle, see Older Children on page 2‑43 or Infants and Young Children on page 2‑45.
2-16 Seats and Restraints Q: What is wrong with this? { WARNING Q: What is wrong with this? You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit snugly against your body. A: The shoulder belt is too loose. It will not give as much protection this way. A: The lap belt is too loose. It will not give nearly as much protection this way.
Seats and Restraints { WARNING Q: What is wrong with this? You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs. 2-17 { WARNING You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen.
2-18 Seats and Restraints Q: What is wrong with this? { WARNING Q: What is wrong with this? You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries. Be sure the belt goes under the armrests. A: The belt is over an armrest. A: The shoulder belt is worn under the arm.
Seats and Restraints { WARNING You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen. The shoulder belt should go over the shoulder and across the chest.
2-20 Seats and Restraints Q: What is wrong with this? { WARNING You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to fix it. A: The belt is twisted across the body. Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1.
Seats and Restraints 2-21 4. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. See “Shoulder Belt Height Adjustment” later in this section for use and important safety information. 3. Push the latch plate into the buckle until it clicks. To unlatch the belt, push the button on the buckle. The belt should return to its stowed position. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 2‑25.
2-22 Seats and Restraints Shoulder Belt Height Adjuster Safety Belt Pretensioners The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions. This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly.
Seats and Restraints Rear Safety Belt Comfort Guides 2-23 Here is how to install a comfort guide to the safety belt: This vehicle may have rear shoulder belt comfort guides. If not, they are available through your dealer/retailer. The guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed and properly adjusted, the comfort guide positions the shoulder belt away from the neck and head. 2.
2-24 Seats and Restraints { WARNING A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. 4.
Seats and Restraints Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
2-26 Seats and Restraints Safety Belt Care Keep belts clean and dry. { WARNING Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. Replacing Safety Belt System Parts After a Crash { WARNING A crash can damage the safety belt system in the vehicle.
Seats and Restraints Airbag System The vehicle has the following airbags: All of the airbags in the vehicle will have the word AIRBAG embossed in the trim or on an attached label near the deployment opening. . A frontal airbag for the driver. . A frontal airbag for the right front passenger. . A seat-mounted side impact airbag for the driver. . A seat-mounted side impact airbag for the right front passenger.
2-28 Seats and Restraints { WARNING { WARNING Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with airbags.
Seats and Restraints 2-29 Where Are the Airbags? The driver's frontal airbag is in the middle of the steering wheel. The right front passenger frontal airbag is in the instrument panel on the passenger side. Driver Side shown, Passenger Side similar The seat-mounted side impact airbags for the driver and right front passenger are in the side of the seatbacks closest to the door.
2-30 Seats and Restraints Driver Side shown, Passenger Side similar The roof-rail airbags for the driver, right front passenger, and second row outboard passengers are in the ceiling above the side windows. { WARNING WARNING (Continued) If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear.
Seats and Restraints When Should an Airbag Inflate? Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver's or right front passenger's head and chest. However, they are only designed to inflate if the impact exceeds a predetermined deployment threshold. Deployment thresholds are used to predict how severe a crash is likely to be in time for the airbags to inflate and help restrain the occupants.
2-32 Seats and Restraints Seat-mounted side impact and roof-rail airbags are intended to inflate in moderate to severe side crashes. In addition, these roof-rail airbags are intended to inflate during a rollover or in a severe frontal impact. Seat-mounted side impact and roof-rail airbags will inflate if the crash severity is above the system's designed threshold level. The threshold level can vary with specific vehicle design. Roof-rail airbags are not intended to inflate in rear impacts.
Seats and Restraints How Does an Airbag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle. Airbags supplement the protection provided by safety belts. Frontal airbags distribute the force of the impact more evenly over the occupant's upper body, stopping the occupant more gradually.
2-34 Seats and Restraints The parts of the airbag that come into contact with you may be warm, but not too hot to touch. There may be some smoke and dust coming from the vents in the deflated airbags. Airbag inflation does not prevent the driver from seeing out of the windshield or being able to steer the vehicle, nor does it prevent people from leaving the vehicle. { WARNING When an airbag inflates, there may be dust in the air.
Seats and Restraints . . The vehicle has a crash sensing and diagnostic module which records information after a crash. See Vehicle Data Recording and Privacy on page 12‑15 and Event Data Recorders on page 12‑15. Let only qualified technicians work on the airbag systems. Improper service can mean that an airbag system will not work properly. See your dealer/retailer for service. Passenger Sensing System 2-35 The vehicle has a passenger sensing system for the right front passenger position.
2-36 Seats and Restraints The passenger sensing system works with sensors that are part of the right front passenger seat. The sensors are designed to detect the presence of a properly-seated occupant and determine if the right front passenger frontal airbag should be enabled (may inflate) or not. According to accident statistics, children are safer when properly secured in a rear seat in the correct child restraint for their weight and size.
Seats and Restraints The passenger sensing system is designed to turn off the right front passenger airbag if: . The right front passenger seat is unoccupied. . The system determines an infant is present in a child restraint. . A right front passenger takes his/her weight off of the seat for a period of time. . Or, if there is a critical problem with the airbag system or the passenger sensing system.
2-38 Seats and Restraints If the On Indicator is Lit for a Child Restraint If a child restraint has been installed and the on indicator is lit: 1. Turn the vehicle off. 2. Remove the child restraint from the vehicle. 3. Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers. 4.
Seats and Restraints If this happens, use the following steps to allow the system to detect that person and enable the right front passenger frontal airbag: 1. Turn the vehicle off. 2. Remove any additional material from the seat, such as blankets, cushions, seat covers, seat heaters, or seat massagers. 3. Place the seatback in the fully upright position. 4. Have the person sit upright in the seat, centered on the seat cushion, with legs comfortably extended. 5.
2-40 Seats and Restraints The on indicator may be lit if an object, such as a briefcase, handbag, grocery bag, laptop or other electronic device, is put on an unoccupied seat. If this is not desired remove the object from the seat. Your dealer/retailer and the service manual have information about servicing the vehicle and the airbag system. To purchase a service manual, see Service Publications Ordering Information on page 12‑12.
Seats and Restraints In addition, the vehicle has a passenger sensing system for the right front passenger position, which includes sensors that are part of the passenger seat. The passenger sensing system may not operate properly if the original seat trim is replaced with non-GM covers, upholstery or trim, or with GM covers, upholstery or trim designed for a different vehicle.
2-42 Seats and Restraints Airbag System Check The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working. See Airbag Readiness Light on page 4‑21 for more information. Notice: If an airbag covering is damaged, opened, or broken, the airbag may not work properly. Do not open or break the airbag coverings. If there are any opened or broken airbag covers, have the airbag covering and/or airbag module replaced.
Seats and Restraints Child Restraints Older Children Use a booster seat with a lap-shoulder belt until the child passes the below fit test: . Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue. If no, return to the booster seat. . Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, try using the rear safety belt comfort guide.
2-44 Seats and Restraints According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. WARNING (Continued) The child could move too far forward increasing the chance of head and neck injury. The child might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries.
Seats and Restraints Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
2-46 Seats and Restraints { WARNING Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child restraint in a rear seat. It is also better to secure a forward-facing child restraint in a rear seat. If you must secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go.
Seats and Restraints { WARNING { WARNING To reduce the risk of neck and head injury during a crash, infants need complete support. This is because an infant's neck is not fully developed and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing child restraint settles into the restraint, so the crash forces can be distributed across the strongest part of an infant's body, the back and shoulders. Infants should always be secured in rear-facing child restraints.
2-48 Seats and Restraints Securing an Add-On Child Restraint in the Vehicle { WARNING (B) Forward-Facing Child Seat A forward-facing child seat (B) provides restraint for the child's body with the harness. (C) Booster Seats A booster seat (C) is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster seat can also help a child to see out the window. A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle.
Seats and Restraints the LATCH system. See Lower Anchors and Tethers for Children (LATCH System) on page 2‑51 for more information. Children can be endangered in a crash if the child restraint is not properly secured in the vehicle. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it.
2-50 Seats and Restraints A label on the sun visor says, “Never put a rear-facing child restraint in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. { WARNING A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag.
Seats and Restraints Lower Anchors and Tethers for Children (LATCH System) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
2-52 Seats and Restraints Top Tether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash. Your child restraint may have a single tether (A) or a dual tether (C).
Seats and Restraints To assist you in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion. For a wagon the lower anchors are beneath zippers, located near the labels. Open the zippers to access the lower anchors. Sedan 2-53 The top tether anchors for a sedan are located under the tether covers, on the rear seatback filler panel.
2-54 Seats and Restraints Securing a Child Restraint Designed for the LATCH System { WARNING If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Install a LATCH-type child restraint properly using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with the child restraint and the instructions in this manual.
Seats and Restraints 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 1.1. Find the lower anchors for the desired seating position. 2.
2-56 Seats and Restraints If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback. If the position you are using has a fixed headrest or head restraint and you are using a dual tether, route the tether around the headrest or head restraint. If the position you are using has a fixed headrest or head restraint and you are using a single tether, route the tether over the headrest or head restraint. 3.
Seats and Restraints Replacing LATCH System Parts After a Crash { WARNING A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer/retailer to have the system inspected and any necessary replacements made as soon as possible.
2-58 Seats and Restraints If the child restraint does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. If more than one child restraint needs to be installed in the rear seat, be sure to read Where to Put the Restraint on page 2‑49. 1. Put the child restraint on the seat. 2.
Seats and Restraints 5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. 2-59 6. If the child restraint has a top tether, follow the child restraint manufacturer's instructions regarding the use of the top tether.
2-60 Seats and Restraints A label on the sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. { WARNING A child in a rear-facing child restraint can be seriously injured or killed if the front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag.
Seats and Restraints 2-61 You will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 1. Move the seat as far back as it will go before securing the forward-facing child restraint. When the passenger sensing system has turned off the front passenger frontal airbag, the off indicator on the passenger airbag status indicator should light and stay lit when the vehicle is started.
2-62 Seats and Restraints If the airbag is off, the off indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. If a child restraint has been installed and the on indicator is lit, see “If the On Indicator is Lit for a Child Restraint” under Passenger Sensing System on page 2‑35 for more information. 6.
Storage Storage Storage Compartments Storage Compartments Instrument Panel Storage . . . . Glove Box . . . . . . . . . . . . . . . . . . . . Cupholders . . . . . . . . . . . . . . . . . . . Center Console Storage . . . . . . 3-1 3-1 3-1 3-1 Additional Storage Features Cargo Cover . . . . . . . . . . . . . . . . . . 3-2 Cargo Management System (Wagon Only) . . . . . . . . . . . . . . . . 3-3 Cargo Net (Wagon) . . . . . . . . . . . 3-4 Convenience Net (Sedan) . . . . .
3-2 Storage 3. Make sure the cartridge is properly installed by pulling it slightly up, it should be firmly fitted. Additional Storage Features Cargo Cover 4. Grasp the handle and unroll the cover. Latch the posts into the sockets on the inside of the vehicle to secure it. The cargo cover can be used to cover items in the cargo area of the vehicle. To remove the cargo cover, do the following: To install the cargo cover: 1. Hold the cartridge so that the pull out shade faces backwards. 2.
Storage { WARNING 3-3 Cargo Management System (Wagon Only) An improperly stored cargo cover could be thrown about the vehicle during a collision or sudden maneuver. Someone could be injured. If the cover is removed, always store it in the proper storage location. When it is replaced, always be sure that it is securely reattached. The cover can be opened to two positions to allow access to the storage area. Press on the bottom of load floor handle assembly to lift the top on the handle.
3-4 Storage Cargo Net (Wagon) D-Ring Sliders There are four D-Ring sliders that move along rails on both sides of the cargo management area. These can be used as tie-downs when storing cargo. { WARNING Installing D-Ring Sliders The loop of the D-Ring slider must be facing inward towards the storage area and the ring must be in the up position for proper usage. To install the D-Ring slider (A), insert it into the channel (B) located in the middle of each rail.
Storage 3-5 2. There are four tether positions for the lower hook straps. In the front position, the seat backs should be down for the net to properly hold items. 4. The net can also be mounted to the tethers on the back of the rear seats when the seats are upright. 1. There are four installation openings in the roof, two located in front of and two behind the rear seats. Insert the top corners of the cargo net into the large opening in the roof and secure by sliding them into the small opening. 3.
3-6 Storage Convenience Net (Sedan) Your vehicle may have a convenience net in the rear of the vehicle. Put small loads behind the net. It can also be positioned into an envelope style to hold smaller items. The net is not for heavier loads. Store items as far forward as you can. 5. Pull on the straps to tighten the net. Put light loads behind the net to keep them from falling over or being thrown into the cabin during heavy braking. The net should not be overloaded or used to store heavy loads.
Storage For vehicles with a roof rack, the rack can be used to load items. For roof racks that do not have crossrails included, GM Certified crossrails can be purchased as an accessory. See your dealer/retailer for additional information. Notice: Loading cargo on the roof rack that weighs more than 75 kg (165 lbs) or hangs over the rear or sides of the vehicle may damage the vehicle. Load cargo so that it rests evenly between the crossrails, making sure to fasten cargo securely.
3-8 Storage 3. Store the siderail covers in a place where it can be laid flat. Do not stack any items on top of the cover. 4. Identify front and rear crossrail by the size of the crossrail support. 5. The front crossrail support (A) is smaller than the rear crossrail support (B). 6. The crossrail supports are labeled with an arrow that needs to point toward the front of the vehicle. When the lever on the crossrail support is in the down position a pin (A) will be visible on the bottom of the assembly.
Storage 10. Move the levers on both crossrail supports to the down position. Slide the crossrail assembly back and forth until the crossrail pin engages. 11. Push back and forth again to make sure the pins have engaged into the slots. 9. Levers must still be in the forward up position. For front crossbar, slide the crossrail assembly (A) forward until the crossrail end is past the channel cut-out area (B).
3-10 Storage 2 NOTES
Instruments and Controls Instruments and Controls Instrument Panel Overview Instrument Panel Overview . . . . 4-4 Controls Steering Wheel Adjustment . . . 4-6 Steering Wheel Controls . . . . . . 4-7 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Windshield Wiper/Washer . . . . . 4-8 Rear Window Wiper/ Washer . . . . . . . . . . . . . . . . . . . . . . 4-9 Headlamp Washer . . . . . . . . . . . 4-10 Compass . . . . . . . . . . . . . . . . . . . . 4-11 Clock . . . . . . . . . . . . . . . . . .
4-2 Instruments and Controls Vehicle Messages Vehicle Messages . . . . . . . . . . . Battery Voltage and Charging Messages . . . . . . . . . . . . . . . . . . Brake System Messages . . . . Compass Messages . . . . . . . . . Cruise Control Messages . . . . Door Ajar Messages . . . . . . . . . Engine Cooling System Messages . . . . . . . . . . . . . . . . . . Engine Oil Messages . . . . . . . . Engine Power Messages . . . . Fuel System Messages . . . . . .
Instruments and Controls 2 NOTES 4-3
4-4 Instruments and Controls Instrument Panel Overview CTS Shown, CTS-V Similar
Instruments and Controls A. Air Vents on page 7‑6. B. Driver Information Center (DIC) on page 4‑31. C. Instrument Panel Illumination Control on page 5‑5. D. Turn and Lane-Change Signals on page 5‑4. E. Instrument Cluster on page 4‑15. F. Windshield Wiper/Washer on page 4‑8. Rear Window Wiper/Washer on page 4‑9 (If Equipped). G. Navigation Button (If Equipped). See Navigation System Manual. H. Traction Control System (TCS) on page 8‑37. Magnetic Ride Control on page 8‑40 (CTS-V Model Only). I.
4-6 Instruments and Controls Power Tilt Wheel Controls Steering Wheel Adjustment A tilt and telescope wheel lets the steering wheel be adjusted. Do not adjust the steering wheel while driving. The tilt and telescope lever is on the left side of the steering column. To tilt and telescope the steering wheel, pull the lever down. Then move the steering wheel up or down or backward or forward into a comfortable position. Pull the lever up to lock the steering wheel in place.
Instruments and Controls Steering Wheel Controls y / c z (Previous/Next): Press to go to the previous or next radio station stored as a favorite, or the previous or next track of a CD. . For vehicles without a navigation system, press and hold g for two seconds to interact with OnStar® or Bluetooth. See the OnStar® System on page 4‑59, or Bluetooth on page 6‑37 for more information about these features. .
4-8 Instruments and Controls Windshield Wiper/Washer The windshield wiper lever is on the right side of the steering column. Move the windshield wiper lever to select the wiper speed. 7 (Mist): Single wipe, briefly move the lever down and release. Several wipes, hold the lever down. T (Off): Turns the wipers off. & (Adjustable Interval Wipes): For a delayed wiping cycle. Turn the adjustable interval wiper band to set the frequency of wipes.
Instruments and Controls Windshield Washer { WARNING In freezing weather, do not use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. Sedan Model K (Washer Fluid): Press the button with this symbol, on the end of the windshield washer lever, to wash the windshield. The washer fluid sprays onto the windshield and the wipers run for a few cycles to clear the windshield. Press and hold K for more wash cycles.
4-10 Instruments and Controls Z (Rear Wiper Delay Short): Sets a five second delay between wipes. 5 (Rear Wiper Delay Long): Sets a ten second delay between wipes. Headlamp Washer For vehicles with headlamp washers they clear debris from the headlamp lenses. = (Rear Washer): Push the windshield wiper lever forward to spray washer fluid on the rear window. The lever returns to its starting position when released. The headlamps must be on to be washed.
Instruments and Controls 4-11 Compass Compass Calibration The vehicle may have a compass in the Driver Information Center (DIC). The compass can be manually calibrated. Only calibrate the compass in a magnetically clean and safe location, such as an open parking lot, where driving the vehicle in circles is not a danger. It is suggested to calibrate away from tall buildings, utility wires, manhole covers, or other industrial structures, if possible. Compass Zone The zone is set to zone eight.
4-12 Instruments and Controls To calibrate the compass, use the following procedure: Compass Calibration Procedure 1. Before calibrating the compass, check that the compass is set to the correct variance zone. See “Compass Variance (Zone) Procedure” earlier in this section. Do not operate any switches such as window, sunroof, climate controls, seats, etc. during the calibration procedure. 4. The DIC will display Calibrating Drive In Circles.
Instruments and Controls To use an outlet, remove the protective cap. When not in use, always cover the outlet with the protective cap. The accessory power outlet is operational at all times. Notice: If electrical devices are left plugged into a power outlet, the battery may drain causing the vehicle not to start or damage to the battery. This would not be covered by the vehicle warranty. Always unplug all electrical devices when turning off the vehicle.
4-14 Instruments and Controls Ashtrays The vehicle may have two removable ashtrays. One ashtray can be placed into the instrument panel storage compartment and the other into the center console rear compartment. To empty the ashtrays, hold on to the edges of the bin and pull straight out. To reinstall, push the tray back into place. Notice: If papers, pins, or other flammable items are put in the ashtray, hot cigarettes or other smoking materials could ignite them and possibly damage the vehicle.
Instruments and Controls Instrument Cluster United States Automatic Transmission Cluster Shown, Canada and Manual Similar 4-15
4-16 Instruments and Controls United States V-Series Automatic Transmission Cluster Shown, Canada and Manual Similar
Instruments and Controls Speedometer The speedometer shows the vehicle's speed in both kilometers per hour (km/h) and miles per hour (mph). Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles. If this vehicle has to have a new odometer installed, the new one may read the correct mileage. This is because the vehicle computer has stored the mileage in memory. Trip Odometer The trip odometer can record the number of miles or kilometers traveled for up to two trips.
4-18 Instruments and Controls The Fuel Level Low message appears in the Driver Information Center (DIC) and a single chime sounds. See Fuel System Messages on page 4‑42 for more information. Here are four things that some owners ask about. None of these show a problem with your fuel gage: . At the service station, the fuel pump shuts off before the gage reads full. . It takes a little more or less fuel to fill up than the gage indicated.
Instruments and Controls Engine Speed Limiter 4-19 Engine Oil Pressure Gage This feature prevents the engine speed from reaching an unsafe level. If the level is too high, the throttle closes or limits the fuel supply until the engine speed returns to a safe level. Throttle operation and fuel supply returns to normal when engine speed is lowered. For the CTS-V, the tachometer tracer lights flashes prior to reaching engine speed limit.
4-20 Instruments and Controls A reading outside the normal operating range may be caused by a dangerously low oil level or some other problem causing low oil pressure. Oil should be checked as soon as possible. See Oil Pressure Low Stop Engine under Driver Information Center (DIC) on page 4‑31 and Engine Oil on page 9‑10. Engine Coolant Temperature Gage { WARNING Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire. Someone could be burned.
Instruments and Controls Safety Belt Reminders Driver Safety Belt Reminder Light Passenger Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument panel cluster. When the engine is started this light and the chime comes on and stays on for several seconds to remind the passenger to fasten their safety belt. The light also begins to flash.
4-22 Instruments and Controls Passenger Airbag Status Indicator The airbag readiness light comes on and stays on for several seconds when the vehicle is started. Then the light goes out. The vehicle has the passenger sensing system. See Passenger Sensing System on page 2‑35 for important safety information. The instrument panel has a passenger airbag status indicator.
Instruments and Controls If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer/retailer for service. { WARNING If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away.
4-24 Instruments and Controls If the check engine light comes on and stays on, while the engine is running, this indicates that there is an OBD II problem and service is required. Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle. This system assists the service technician in correctly diagnosing any malfunction.
Instruments and Controls An emission system malfunction might be corrected. . . Make sure the fuel cap is fully installed. See Filling the Tank on page 8‑52. The diagnostic system can determine if the fuel cap has been left off or improperly installed. A loose or missing fuel cap allows fuel to evaporate into the atmosphere. A few driving trips with the cap properly installed should turn the light off.
4-26 . Instruments and Controls The vehicle will not pass this inspection if the OBD II (on-board diagnostic) system determines that critical emission control systems have not been completely diagnosed by the system. The vehicle would be considered not ready for inspection. This can happen if the battery has recently been replaced or if the battery has run down. The diagnostic system is designed to evaluate critical emission control systems during normal driving.
Instruments and Controls For vehicles with the Electric Park Brake (EPB), this red brake warning light comes on when the park brake is applied. If the light continues flashing after the park brake is released, or while driving, there is a problem with the Electric Parking Brake system. If the light does not come on, or remains flashing, see you dealer/retailer. does not come on then, have it fixed so it will be ready to warn if there is a problem.
4-28 Instruments and Controls Then start the engine again to reset the system. If the ABS light stays on, or comes on again while driving, the vehicle needs service. If the regular brake system warning light is not on, the vehicle still has brakes, but not antilock brakes. If the regular brake system warning light is also on, the vehicle does not have antilock brakes and there is a problem with the regular brakes. See Brake System Warning Light on page 4‑26.
Instruments and Controls See Traction Control System (TCS) on page 8‑37 and StabiliTrak System on page 8‑38 for more information. Engine Coolant Temperature Warning Light The engine coolant temperature warning light comes on briefly when the engine is started. If it does not, have the vehicle serviced by your dealer/retailer. If the system is working normally the indicator light then goes off. If the light comes on and stays on while driving, the vehicle may have a problem with the cooling system.
4-30 Instruments and Controls Engine Oil Pressure Light Security Light { WARNING Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire. Someone could be burned. Check the oil as soon as possible and have the vehicle serviced. Notice: Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty. Always follow the maintenance schedule in this manual for changing engine oil.
Instruments and Controls Fog Lamp Light Cruise Control Light 4-31 Information Displays Driver Information Center (DIC) The fog lamp light comes on when the fog lamps are in use. This light comes on whenever the cruise control is set. The light goes out when the fog lamps are turned off. See Fog Lamps on page 5‑5 for more information. The light goes out when the cruise control is turned off. See Cruise Control on page 8‑41 for more information.
4-32 Instruments and Controls If a problem is detected, a warning message appears on the display. Take any message that appears on the display seriously and remember that clearing the message only makes the message disappear, and does not correct the problem. DIC Operation and Displays 3 (Trip/Fuel): Press this button to scroll through the trip and fuel displays. See “Trip/Fuel Display Menu Items” following for more information on these displays.
Instruments and Controls Fuel Range AVG (Average) Economy This display shows the approximate number of remaining miles (mi) or kilometers (km) you can drive without refilling the fuel tank. This estimate is based on the current driving conditions and changes if the driving conditions change.
4-34 Instruments and Controls Speedometer This display shows a digital speedometer in the DIC. The speed displays in either miles per hour (mph) or kilometers per hour (km/h). To change the units from English to metric, see “Units” later in this section. Blank Display This display shows no information.
Instruments and Controls information button again until the DIC displays Rear Tire PSI (kPa) Left ## Right ##. If a low tire pressure condition is detected by the system while driving, a message advising you to add air to a specific tire appears in the display. See Tire Pressure on page 9‑66 and Tire Messages on page 4‑48 for more information. Battery Voltage This display shows the current battery voltage. The vehicle's charging system regulates voltage based on the state of the battery.
4-36 Instruments and Controls 4. To learn additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight learned transmitters. 5. To exit the programming mode, you must cycle the key to LOCK/OFF. Lateral Acceleration (CTS-V Only) Lateral acceleration is a measure of how hard you are taking a corner. For example, when you are turning right you will feel your body push to the left. This force is measured in a "g". This gage will display from 0.0 g to 2.0 g.
Instruments and Controls The following are the possible messages that can be displayed and some information about them. pressing the vehicle information button until Battery Voltage is displayed. Battery Voltage and Charging Messages Battery Volts Low Battery Saver Active This message displays when the system detects that the battery voltage is dropping below expected levels. The battery saver system starts reducing certain features of the vehicle that you may be able to notice.
4-38 Instruments and Controls Brake System Messages Park Brake Released Press Brake To Start Engine (Automatic Transmission Only) For vehicles with the Electric Parking Brake, this message displays when the parking brake has been released from the set position. See the Electric Parking Brake information under Parking Brake (Manual) on page 8‑34 or Parking Brake (Electric) on page 8‑35 for more information.
Instruments and Controls Brake System Warning Light on page 4‑26 for more information. This message may also be displayed for other brake system problems. Have the brake system serviced by your dealer/retailer as soon as possible. Service Park Brake For vehicles with the Electric Parking Brake, this message displays if a problem is detected with the electric parking brake system. See your dealer/retailer for service.
4-40 Instruments and Controls Rear Access Open (Wagon) This message displays when the liftgate is not closed completely. Make sure that the liftgate is closed completely. Right Rear Door Open This message displays when the passenger side rear door is not closed completely. Make sure that the door is closed completely. Trunk Open (Sedan) This message displays when the trunk is not closed completely. Make sure that the trunk is closed completely.
Instruments and Controls When you reset the Change Engine Oil Soon message by clearing it from the display, you still must reset the engine oil life system separately. For more information on resetting the engine oil life system, see Engine Oil Life System on page 9‑12. Engine Oil Low Add Oil If the vehicle has an oil level sensor, this message displays if the oil level in the vehicle is low. Check the oil level and correct it as necessary.
4-42 Instruments and Controls Fuel System Messages Electronic Key Already Known Fuel Level Low If the vehicle has the keyless access system, this message displays if you try to match a transmitter that has already been learned. See the Keyless Access information for Remote Keyless Entry (RKE) System Operation (Key Access) on page 1‑5 or Remote Keyless Entry (RKE) System Operation (Keyless Access) on page 1‑7 for more information. This message displays when the vehicle is low on fuel.
Instruments and Controls If moving the transmitter to different locations within the vehicle does not help, place the transmitter in the center console transmitter pocket with the buttons facing the front of the vehicle and then start the vehicle. . The vehicle's battery voltage is low. The battery voltage must be above 10 volts for the keyless access transmitter to be detected properly.
4-44 Instruments and Controls Press Start Control To Learn Keys If the vehicle has the keyless access system, this message displays when matching new transmitters to the vehicle. See the Keyless Access information for Remote Keyless Entry (RKE) System Operation (Key Access) on page 1‑5 or Remote Keyless Entry (RKE) System Operation (Keyless Access) on page 1‑7 for more information.
Instruments and Controls 4-45 See Adaptive Forward Lighting (AFL) on page 5‑4 for more information. Object Detection System Messages Ride Control System Messages Automatic Light Control Off Parking Assist Off All Wheel Drive Off This message displays when the automatic headlamps are turned off. If the vehicle has the Ultrasonic Rear Parking Assist (URPA) system, after the vehicle has been started, this message displays to remind the driver that the URPA system has been turned off.
4-46 Instruments and Controls Service All Wheel Drive This message displays if a problem occurs with the All-Wheel Drive (AWD) system. The vehicle will run in 2WD. This could be caused by: notice that the effort required to steer the vehicle increases or feels heavier, but you will still be able to steer the vehicle. See Steering on page 8‑5. . An electronics problem Service Stabilitrak . An AWD system oil overheat .
Instruments and Controls Adjust your driving accordingly. See “Competitive Driving Mode” under Traction Control System (TCS) on page 8‑37 for more information. Stabilitrak Not Ready This message may display after first driving the vehicle and exceeding 30 km/h (19 mph) for 30 seconds. The TCS/StabiliTrak warning light on the instrument panel cluster also comes on. The StabiliTrak system is not functional until the message has turned off. See StabiliTrak System on page 8‑38 for more information. on.
4-48 Instruments and Controls Airbag System Messages Service Air Bag This message displays when there is a problem with the airbag system. Have the vehicle serviced by your dealer/retailer immediately. See Airbag Readiness Light on page 4‑21 for more information. Anti-Theft Alarm System Messages Service Theft Deterrent System This message displays when there is a problem with the theft-deterrent system programmed in the key.
Instruments and Controls comes on and stays on, there may be a problem with the TPMS. See your dealer/retailer. The low tire pressure warning light will also come on. See Tire Pressure Light on page 4‑29. Tire Learning Active If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire Loading Information label.
4-50 Instruments and Controls Service Transmission Sport Mode This message displays when there is a problem with the vehicle's transmission. Have the vehicle serviced by your dealer/retailer. This message displays when the vehicle is in sport mode. The transmission gear position will also be displayed when DSC is in use. See “Driver Shift Control (DSC)” under Automatic Transmission on page 8‑26 for more information.
Instruments and Controls Vehicle Personalization 2. Press the customization button to enter the feature settings menu. Vehicle customization allows certain features to be programmed for one preferred setting. Feature Settings Menu Items Only the customization options available will be displayed on the DIC. The default settings were preset when the vehicle left the factory, but may have been changed. The customization preferences are automatically recalled.
4-52 Instruments and Controls No Change: No change will be made to this feature. The current setting will remain. To select a setting, press the set/reset button while the desired setting is displayed on the DIC. Auto Door Lock At Vehicle Speed (default on Manual Transmission): The vehicle's doors automatically lock when the vehicle speed is above 5 mph (8 km/h) for three seconds. No Change: No change will be made to this feature. The current setting will remain.
Instruments and Controls To select a setting, press the set/reset button while the desired setting is displayed on the DIC. Remote Door Lock Feedback This feature allows you to select the type of feedback you will receive when locking the vehicle with the Remote Keyless Entry (RKE) or keyless access transmitter, or when the vehicle is automatically locked using the Keyless Locking feature. You will not receive feedback when locking the vehicle with the transmitter if the doors are open.
4-54 Instruments and Controls Press the customization button until Remote Door Unlock appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the menu up/down button to scroll through the following settings: Press the customization button until Exit Lighting appears on the DIC display. Press the set/reset button once to access the settings for this feature.
Instruments and Controls No Change: No change will be made to this feature. The current setting will remain. To select a setting, press the set/ reset button while the desired setting is displayed on the DIC. To select a setting, press the set/reset button while the desired setting is displayed on the DIC. Keyless Locking Factory Settings This feature allows you to set all of the customization features back to their factory default settings.
4-56 Instruments and Controls Press the customization button until Keyless Locking appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the menu up/down button to scroll through the following settings: Off (default): The keyless locking feature will be disabled. On: The keyless locking feature will be enabled.
Instruments and Controls Press the customization button until Chime Volume appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the menu up/ down button to scroll through the following settings: Normal: The chime volume will be set to a normal level. Loud: The chime volume will be set to a loud level. No Change: No change will be made to this feature. The current setting will remain. There is no default for chime volume.
4-58 Instruments and Controls The automatic easy exit seat movement will only occur one time after the key is removed from the ignition. If the automatic movement has already occurred, and you put the key back in the ignition and remove it again, the seat and steering column will stay in the original exit position, unless a memory recall took place prior to removing the key again.
Instruments and Controls OnStar® System OnStar® uses several innovative technologies and live advisors to provide a wide range of safety, security, navigation, diagnostics, and calling services. Automatic Crash Response In a crash, built in sensors can automatically alert an OnStar advisor who is immediately connected to the vehicle to see if you need help.
4-60 Instruments and Controls The OnStar system can record and transmit vehicle information. This information is automatically sent to an OnStar call center when Q is pressed, ] is pressed, or if the airbags or ACR system deploy. This information usually includes the vehicle's GPS location and, in the event of a crash, additional information regarding the crash that the vehicle was involved in (e.g. the direction from which the vehicle was hit).
Instruments and Controls Universal Remote System See Radio Frequency Statement on page 12‑16 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. Universal Remote System Programming This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices.
4-62 Instruments and Controls Programming the Universal Home Remote System To program up to three devices: For questions or help programming the Universal Home Remote System, call 1‐800‐355‐3515 or go to www.homelink.com. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before starting. Otherwise, the device will time out and the procedure will have to be repeated. 1.
Instruments and Controls 3. At the same time, press and hold both the Universal Home Remote button to be used to control the garage door and the hand-held transmitter button. Do not release the Universal Home Remote button or the hand-held transmitter button until Step 4 has been completed. Some entry gates and garage door openers may require substitution of Step 3 with the procedure noted in “Gate Operator and Canadian Programming” later in this section. 4.
4-64 Instruments and Controls 7. Firmly press and release the “Learn” or “Smart” button. After you press this button, you will have 30 seconds to complete Step 8. 6. After Steps 1 through 5 have been completed, locate inside the garage the garage door opener receiver (motor-head unit). Locate the “Learn” or “Smart” button. The name and color of the button may vary by manufacturer. 8. Immediately return to the vehicle.
Instruments and Controls Gate Operator and Canadian Programming If you have questions or need help programming the Universal Home Remote System, call 1-800-355-3515 or go to www.homelink.com. Canadian radio-frequency laws require transmitter signals to time out or quit after several seconds of transmission. This may not be long enough for Universal Home Remote to pick up the signal during programming. Similarly, some U.S. gate operators are manufactured to time out in the same manner.
4-66 Instruments and Controls Erasing Universal Remote Buttons Reprogramming a Single Universal Remote Button All programmed buttons should be erased when the vehicle is sold or the lease ends. To reprogram any of the three Universal Remote buttons, repeat the programming instructions earlier in this section, beginning with Step 2.
Lighting Lighting Exterior Lighting Exterior Lamp Controls . . . . . . . . 5-1 Exterior Lamps Off Reminder . . . . . . . . . . . . . . . . . . . . 5-2 Headlamp High/Low-Beam Changer . . . . . . . . . . . . . . . . . . . . . 5-2 Flash-to-Pass . . . . . . . . . . . . . . . . . 5-2 Daytime Running Lamps (DRL) . . . . . . . . . . . . . . . . 5-3 Adaptive Forward Lighting (AFL) . . . . . . . . . . . . . . . 5-4 Hazard Warning Flashers . . . . . 5-4 Turn and Lane-Change Signals . . . . . . . . . . . . . . . . .
5-2 Lighting ; (Parking Lamps): Turns on the parking lamps together with the following: . Sidemarker Lamps . Taillamps . License Plate Lamps . Instrument Panel Lights 5 (Headlamps): Turns on the headlamps, together with the previously listed lamps and lights. Headlamp High/ Low-Beam Changer Push the turn signal/lane change lever away from you to turn the high beams on. Pull the lever towards you and then release it to return to low beams.
Lighting Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lamps are required on all vehicles first sold in Canada. The DRL system will make either the reduced intensity low-beam headlamps or dedicated DRL's come on when the following conditions are met: . It is still daylight and the ignition is in ON/RUN or START. . The exterior lamp control is in off or AUTO and the headlamps are off.
5-4 Lighting Adaptive Forward Lighting (AFL) Hazard Warning Flashers | Hazard Warning Flasher: The Adaptive Forward Lighting System (AFL) pivots the headlamps horizontally to provide greater road illumination while turning. To enable AFL, set the exterior lamp switch on the multifunction lever to the AUTO position. Moving the switch out of the AUTO position will deactivate the system. AFL will operate when the vehicle speed is greater than 2 mph (3 km/h).
Lighting 5-5 Fog Lamps Interior Lighting Reading Lamps Use the fog lamps for better vision in foggy or misty conditions. The fog lamp control is located on the turn signal/multifunction lever. Instrument Panel Illumination Control The reading lamps are located on the overhead console. These lamps come on automatically when any door is opened. # (Fog Lamps): Turn the fog lamp band on the lever up to # and release it, to turn the fog lamps on or off. The band will return to its original position.
5-6 Lighting Lighting Features Entry Lighting The entry lighting system turns on the reading and dome lamps and the backlighting to the exterior lamp control, when a door is opened or if the transmitter unlock button is pressed. If activated by the transmitter, the lighting stays on for about 25 seconds. The entry lighting system uses the light sensor on the instrument panel; so it must be dark outside in order for the lamps to turn on. The lamps turn off about 25 seconds after the last door is closed.
Lighting This is because the generator (alternator) may not be spinning fast enough at idle to produce all the power that is needed for very high electrical loads. A high electrical load occurs when several of the following are on, such as: headlamps, high beams, fog lamps, rear window defogger, climate control fan at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets. EPM works to prevent excessive discharge of the battery.
5-8 Lighting 2 NOTES
Infotainment System Infotainment System Introduction Read the following pages to become familiar with the audio system's features. Introduction { WARNING Introduction . . . . . . . . . . . . . . . . . . . 6-1 Theft-Deterrent Feature . . . . . . . 6-2 Operation . . . . . . . . . . . . . . . . . . . . . 6-2 Taking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others. Do not give extended attention to entertainment tasks while driving.
6-2 Infotainment System Navigation/Radio System Operation For vehicles with a navigation radio system, see the separate Navigation System manual. Theft-Deterrent Feature THEFTLOCK® is designed to discourage theft of the vehicle's radio by learning a portion of the Vehicle Identification Number (VIN). The radio does not operate if it is stolen or moved to a different vehicle.
Infotainment System 6-3 Setting the Tone (Bass/Midrange/Treble) BASS/MID/TREB (Bass, Midrange, or Treble): To adjust bass, midrange, or treble: 1. Press the TUNE/TONE knob until the tone control tabs display. Partial View of Radio with DVD Audio, Hard Drive Device (HDD), and USB The vehicle may have one of these radios as its audio system. If the vehicle does not have one of these radio systems, it may have a navigation radio system.
6-4 Infotainment System 4. To decrease the highlighted setting, do one of the following: . Turn the TUNE/TONE knob counterclockwise. . Press the . s REV button. Press the © SEEK button. To quickly adjust bass, midrange, or treble to the middle position, press the softkey under the BASS, MID, or TREB tab for more than two seconds. A beep may sound and the level adjusts to the middle position.
Infotainment System The DSP settings available are: . . . . Normal: Select for normal mode, this provides the best sound quality for all seating positions. Driver: Select to adjust the audio for the driver to receive the best possible sound quality. Rear: Select to adjust the audio for the rear seat passengers to receive the best possible sound quality. Centerpoint®: Select to enable Bose® Centerpoint®. Centerpoint® produces a full vehicle surround sound listening experience from CD, non-5.
6-6 Infotainment System Speed Compensated Volume (SCV) A Radio with SCV automatically adjusts the sound to compensate for road and wind noise as the vehicle speeds up or slows down, so that the volume is consistent while driving. To activate SCV: 1. Set the radio volume to the desired level. Noise Compensation Technology If the vehicle has the Radio with DVD Audio, HDD, and USB, it has Bose AudioPilot® noise compensation technology.
Infotainment System Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Gracenote® Database Gracenote Music Recognition Service, Music recognition technology, and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, visit www.gracenote.com. CD and music-related data from Gracenote, Inc., copyright © 2000-2007 Gracenote.
6-8 Infotainment System You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights.
Infotainment System Radio AM-FM Radio Control Buttons The buttons used to control the radio are: FM/AM: Press to choose between FM and AM. m: Press to choose the XM™ band (if equipped). TUNE: Turn to search for stations. MENU/SELECT: Turn clockwise or counterclockwise to scroll through the station list. Press the MENU/ SELECT knob to select the desired station. INFO: Press to display additional information that may be available for the current song.
6-10 Infotainment System Storing a Radio Station as a Favorite To store a station as a favorite, perform the following steps: Drivers are encouraged to set up their radio station favorites while the vehicle is stopped. Tune to favorite stations using the presets, favorites button, and steering wheel controls, if the vehicle has this feature. 1. Tune to the desired radio station.
Infotainment System To resume playback from the current pause point, press r / j again. The radio will no longer be playing “live” radio. Instead, time shifted content is being played from the buffer. When the radio is playing time shifted content from the buffer, a buffer status bar shows below the station number on the left side of screen. When the radio station is changed, the buffer is cleared and automatically restarted for the current station.
6-12 Infotainment System Control Buttons XM Categories Selecting a Station by Station List The buttons used to control the radio are: XM stations are organized in categories. The infotainment system can list all XM stations. m : Press to choose the XM™ band (if equipped). Removing or Adding Categories To select a station from the station list: TUNE: Turn to search for stations. MENU/SELECT: Turn clockwise or counterclockwise to scroll through the category list.
Infotainment System m: Press to switch to XM mode. Turn the TUNE/TONE knob to select from a list of available XM stations. Turn the TUNE/TONE knob until the desired station is highlighted. Press the TUNE/TONE knob to select the highlighted station. The highlighted station will also automatically be selected if the TUNE/TONE is released and no longer turned. Storing an XM Station as a Favorite Drivers are encouraged to set up their radio station favorites while the vehicle is stopped.
6-14 Infotainment System XM Messages XL (Explicit Language Channels): These channels, or any others, can be blocked at a customer's request, by calling 1-800-852-XMXM (9696). XM Updating: The encryption code in the receiver is being updated, and no action is required. This process should take no longer than 30 seconds. No XM Signal: The system is functioning correctly, but the vehicle is in a location that is blocking the XM™ signal. When the vehicle is moved into an open area, the signal should return.
Infotainment System XM Not Available: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer/ retailer. Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet.
6-16 Infotainment System Audio Players CD Player The Infotainment system's CD player can play audio CDs and MP3 CDs. CDs that are 8 cm (3 in.) in diameter will not work in the CD player. Care of CDs If playing a CD, the sound quality can be reduced due to disc quality, the method of recording, the quality of the music that has been recorded, and the way the disc has been handled. Handle discs carefully. Store CDs in their original cases or other protective cases and away from direct sunlight and dust.
Infotainment System \ FWD (Fast Forward): Press and hold to advance playback quickly within a track. Inserting a CD (Six-Disc CD Player) 6-17 To insert multiple CDs: ^ (Load) : Press to load CDs into the Six-Disc CD player. ^ (Load) : Press to load CDs into the CD player. This CD player holds up to six CDs. 1. Press and hold this button for five seconds. A beep sounds and Load All Discs displays. Z (Eject): To insert one CD: 2. Follow the displayed instruction on when to insert the discs.
6-18 Infotainment System The CD begins playback of the first track on the selected disc. As each new track starts to play the track number displays in the left and center of the screen. Playing a CD Selecting a CD Track Tracks can be selected using the seek buttons, TUNE/TONE knob, or the MENU/SELECT knob. To use the seek buttons: Press the © SEEK button to go to the start of the current track, if more than five seconds have played. Press the ¨ SEEK button to go to the next track.
Infotainment System . The road is very rough. When the road becomes smoother, the disc should play. . The disc is dirty, scratched, wet, or upside down. . The air is very humid. If so, wait about an hour and try again. . There could have been a problem while burning the disc. . The label could be caught in the CD/DVD-A player. If the disc is not playing correctly, for any other reason, try a known good disc.
6-20 Infotainment System The use of disc lens cleaners for discs is not advised, due to the risk of contaminating the lens of the disc optics with lubricants internal to the CD/DVD player mechanism. Notice: If a label is added to a CD, or more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged.
Infotainment System Press the ¨ SEEK button to go to the next track. If © SEEK or ¨ SEEK is held, or pressed multiple times, the player continues moving backward or forward through the tracks on the CD. To use the TUNE/TONE knob: Turn the TUNE/TONE knob to highlight the desired track then press the TUNE/TONE knob to select the track. To use the MENU/SELECT knob: Turn the MENU/SELECT knob to highlight the desired track then press the MENU/SELECT knob to select the track.
6-22 Infotainment System To use the MENU/SELECT knob: Press the softkey under the Menu tab to display a list of all Groups. To change Groups, turn the MENU/ SELECT knob to highlight the desired Group. Press the MENU/ SELECT knob to select it. Playback begins from track 1 of the highlighted Group. Fast Forward and Rewind s REV (Fast Reverse): Press to reverse playback quickly within a track. Sound is heard at a reduced volume. Press once to change playback to a speed of 2X.
Infotainment System Check the DSP settings to determine if a 5.1 surround sound Audio Stream is playing. See Operation on page 6‑2 for more information. Press the DSP tab to see if the 5.1 + Normal or 5.1 + Rear settings are available for selection. If these settings are available, Audio Stream 1 is playing. Playing an MP3/WMA Disc CD/DVD players with the MP3 feature are capable of playing an MP3/WMA on DVD+/-R, CD-R, or CD-RW discs. For more information, see MP3 on page 6‑23 for more information.
6-24 Infotainment System Creating an MP3/WMA Disc . When creating a MP3/WMA disc: . Make sure the MP3/WMA files are recorded on a CD-R or CD-RW disc. . Do not mix standard audio and MP3/WMA files on one disc. . Make sure the CD does not have more than a maximum of 50 folders and playlists, and 255 files to read and play. . Create a folder structure that makes it easy to find songs while driving. Organize songs by albums using one folder for each album.
Infotainment System 6-25 Empty Directory or Folder Order of Play File System and Naming If a root directory or a folder exists somewhere in the file structure that contains only folders/subfolders and no compressed files directly beneath them, the player advances to the next folder in the file structure that contains compressed audio files. Tracks recorded to the CD-R or CD-RW play in the following order: The song name displays the song name that is contained in the ID3 tag.
6-26 Infotainment System Playlists can be selected using the previous and next folder buttons. Tracks can be changed by pressing the seek buttons or turning the tune knob. Songs are played sequentially; press the s REV or \ FWD to reverse or advance through the playing song. The HDD Radio does not support preprogrammed playlists. To create a playlist on the HDD radio from songs recorded to the HDD, see Hard Drive Device (HDD) on page 6‑27.
Infotainment System Searching for MP3 Tracks Tracks can be searched for by using the menu system. songs recorded to the HDD, see Hard Drive Device (HDD) on page 6‑27. To use the menu system: Quick Jump 1. Press the MENU/SELECT knob to display the MP3 Menu. To scroll up or down the list of Artists, Albums, or Song Titles, press and hold the softkey located under the FWD or REV tab. 2. Turn the MENU/SELECT knob to highlight an option from the MP3 Menu. The available options are: . Playlists* .
6-28 Infotainment System Copy Protected CD(s) Make sure the disc is not copy-protected. The radio does not copy a copy-protected CD to the HDD. Deleting a Recorded Song or Category DEL (Delete): Press the DEL button to delete the track that is currently playing or select a track from one of the song lists. To Delete an entire category, select a category and press DEL. Stopping the Recording While recording from the audio CD, press the REC button to display the stop recording option.
Infotainment System Songs recorded with “NO INFO” to the HDD will be hard to sort, identify, and select. To make HDD navigation easier, CDs with “NO INFO” can first be converted to MP3 format with Tag information on a home computer and then recorded to the HDD from an MP3 disc or USB device. Occasionally, the radio may find more than one match in Gracenote® Database for an audio CD that has been recorded.
6-30 Infotainment System USB Host Support HDD Playback Mode The USB connector uses the USB standards, 1.1 and 2.0. The infotainment system displays the current HDD playback mode. The table below shows the display mode options and what happens as the mode is displayed: USB Supported Devices . USB Flash Drives Mode When Displayed . Portable USB Hard Drives Shuffle System is randomly playing back all HDD content. Artist System is playing back content by a selected Artist in alphabetical order.
Infotainment System 6-31 HDD Menu Quick Jump Shuffle Songs 1. Press the MENU/SELECT knob to display the HDD Menu. To scroll up or down the list of Artists, Albums, or Song Titles, press and hold the softkey under the FWD or REV tab. Select this option from the HDD Menu to randomly play back HDD content. 2. Turn the MENU/SELECT knob to highlight an option from the HDD Menu. The available options are: . Shuffle Songs . Playlist . Artists . Albums . Song Titles . Genres . Recently Saved .
6-32 Infotainment System HDD Categories Select the HDD Menu category to display the available items in each individual category, then select an item from one of these submenus to display a list of songs related to that menu item. Select a song to begin playback of that song and to put the HDD in the playback mode. Audiblebook Albums (6) Recently Saved Song Titles (77) Select this option from the HDD Menu to display the last 50 songs added since the vehicle was last turned on.
Infotainment System Saving HDD Favorites Press the FAV button to change between favorite modes during HDD playback. The following favorite modes are supported: . Playlists . Artists . Albums . Genres 6-33 Favorites can be saved by pressing and holding the softkey under the favorites selection. Store favorites according to the following table: Favorites Display Mode Action on Press-and-Hold Playlist Adds currently playing track to the playlist selected.
6-34 Infotainment System Press r / j (play/pause) To pause the radio. The radio display will show the Time Shift buffer status bar. The status bar shows the amount of content that is stored in the buffer and the current pause point. To resume playback from the current pause point, press r / j again. The radio will no longer be playing “live” radio. Instead, time shifted content is being played from the buffer.
Infotainment System Auxiliary Devices The 3.5mm (1/8 in.) input jack and the USB port (if equipped), located in the center console bin, allows portable devices to connect to the vehicle. This is not an audio output; do not plug headphones into the auxiliary input jack. Set up auxiliary devices while the vehicle is stopped. See Defensive Driving on page 8‑3 for more information on driver distraction. When a device is first connected to the 3.5mm (1/8 in.
6-36 Infotainment System Connecting an iPod To connect the iPod, connect one end of the special iPod connection cable to the iPod’s dock connector. Connect the other end to both the USB port and the auxiliary input jack located in the center console. The USB port and the auxiliary input jack are located in the center console bin. If the vehicle is on and the USB connection works, a GM logo may appear on the iPod.
Infotainment System Phone Bluetooth Vehicles with a Bluetooth system can use a Bluetooth capable cell phone with a Hands Free Profile to make and receive phone calls. The system can be used while the ignition is in ON/RUN or ACC/ ACCESSORY position. The range of the Bluetooth system can be up to 30 ft. (9.1 m). Not all phones support all functions, and not all phones are guaranteed to work with the in-vehicle Bluetooth system. See www.gm.com/bluetooth for more information on compatible phones.
6-38 Infotainment System Pairing Information: . Up to five cell phones can be paired to the in-vehicle Bluetooth system. . The pairing process is disabled when the vehicle is moving. . The in-vehicle Bluetooth system automatically links with the first available paired cell phone in the order the phone was paired. . Only one paired cell phone can be connected to the in-vehicle Bluetooth system at a time. .
Infotainment System Listing All Paired and Connected Phones 1. Press and hold two seconds: . . b g for For vehicles without a navigation system, the system responds with “Ready” followed by a tone. For vehicles with a navigation system, the system responds with a tone. After the tone say “Hands Free”. The system responds with “Ready” followed by a tone. 2. Say “Bluetooth”. The system responds with “Bluetooth ready” followed by a tone. 3. Say “List”. The system lists all the paired Bluetooth devices.
6-40 Infotainment System 3. Say “Change phone”. The system responds with “Please wait while I search for other phones”. . . If another phone is found, the response will be “ is now connected”. Using the Store Command The store command allows a phone number to be stored without entering the digits individually. 1. Press and hold two seconds: Storing Name Tags The system can store up to thirty phone numbers as name tags that are shared between the Bluetooth and OnStar systems.
Infotainment System 5. Say a name tag for the phone number. The name tag is recorded and the system responds with “About to store . Does that sound OK?”. . . If the name tag does not sound correct, say “No” and repeat Step 5. If the name tag sounds correct, say “Yes” and the name tag is stored. After the number is stored the system returns to the main menu. Using the Digit Store Command . 2. Say “Digit Store”. The system responds with “Please say the first digit to store” followed by a tone.
6-42 Infotainment System Using the Directory Command Deleting Name Tags The directory command lists all of the name tags stored by the system. To use the directory command: The system uses the following commands to delete name tags: 1. Press and hold two seconds: . . b g for For vehicles without a navigation system, the system responds with “Ready” followed by a tone. For vehicles with a navigation system, the system responds with a tone. After the tone say “Hands Free”.
Infotainment System Using the Delete All Name Tags Command The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar (if present). To use the delete all name tags command: 1. Press and hold two seconds: . . 2. Say “Delete all name tags”. The system responds with “You are about to delete all name tags stored in your phone directory and your route destination directory. Are you sure you want to do this? Please say yes or no.” .
6-44 Infotainment System 3. Say the entire number without pausing. . . If the system recognizes the number, it responds with “OK, Dialing” and dials the number. If the system does not recognize the number, it confirms the numbers followed by a tone. If the number is correct, say “Yes”. The system responds with “OK, Dialing” and dials the number. If the number is not correct, say “No”. The system will ask for the number to be re-entered. Using the Digit Dial Command 1. Press and hold two seconds: . .
Infotainment System 3. Say the name tag of the person to call. . . If the system clearly recognizes the name tag it responds with “OK, calling, ” and dials the number. If the system is unsure it recognizes the right name tag, it confirms the name tag followed by a tone. If the name tag is correct, say “Yes”. The system responds with “OK, calling, ” and dials the number. If the name tag is not correct, say “No”. The system will ask for the name tag to be re-entered.
6-46 Infotainment System Three-Way Calling Muting a Call Transferring a Call Three-Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. Audio can be transferred between the in-vehicle Bluetooth system and the cell phone. 1. While on a call press b g . The system responds with “Ready” followed by a tone.
Infotainment System To Transfer Audio to the In-Vehicle Bluetooth System Voice Pass-Thru The cellular phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to the ON/RUN or ACC/ACCESSORY position. Voice Pass-Thru allows access to the voice recognition commands on the cell phone. See the cell phone manufacturers user guide to see if the cell phone supports this feature.
6-48 Infotainment System 3. Say the number to send. 3. Say the name tag to send. . If the system clearly recognizes the number it responds with “OK, Sending Number” and the dial tones are sent and the call continues. . If the system clearly recognizes the name tag it responds with “OK, Sending ” and the dial tones are sent and the call continues. . If the system is not sure it recognized the number properly, it responds “Dial Number, Please say yes or no?” followed by a tone.
Climate Controls Climate Controls 7-1 Climate Control Systems Dual Automatic Climate Control System Climate Control Systems Dual Automatic Climate Control System . . . . . . . . . . . . . . . . . . . . . . 7-1 The heating, cooling, and ventilation for the vehicle can be controlled with this system. Air Vents Air Vents . . . . . . . . . . . . . . . . . . . . . . 7-6 Maintenance Passenger Compartment Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 A. Display G.
7-2 Climate Controls Automatic Operation AUTO (Automatic): The system automatically controls fan speed, air delivery, and air conditioning in order to heat or cool the vehicle to the desired temperature. When the indicator light is on, the system is in full automatic operation. If the air delivery mode or fan setting is manually adjusted, the auto indicator turns off and displays will show the selected settings. 1. Press the AUTO button. 2.
Climate Controls If the airflow seems low when the fan speed is at the highest setting, the passenger compartment air filter might need to be replaced. For more information, see Passenger Compartment Air Filter on page 7‑6 and Scheduled Maintenance on page 10‑3. H G (Air Delivery Mode Control): Press the buttons to change the direction of the airflow. The current mode appears in the display screen. Changing the mode cancels the automatic air delivery. Press AUTO to return to automatic operation.
7-4 Climate Controls Recirculation is not available in the defrost mode and automatically turns off 10 minutes after defog is selected. This helps to limit window fogging in the vehicle. Using recirculation for long periods of time could cause the air inside the vehicle to become too dry or stuffy. To prevent this from happening, after the air in the vehicle has cooled, select outside air or press the auto button. F (Outside Air): Press to turn on the outside air. An indicator light turns on.
Climate Controls Sensors 7-5 Do not cover the sensors or the automatic climate control system will not work properly. Air Quality Sensor For vehicles with an air quality sensor, the climate control system adjusts to limit some exhaust fumes from being pulled inside your vehicle. The solar sensor located on the instrument panel, near the windshield, monitors the solar heat.
7-6 Climate Controls Under certain conditions, the air quality sensor will not activate recirculation, such as during cold weather or with odors, like skunk. To limit odors manually, press M until the condition has passed. The air quality sensor system does not protect against carbon monoxide (CO), which you cannot see or smell. See Engine Exhaust on page 8‑25. Air Vents Use the air outlets located in the center and on the side of the instrument panel to direct the airflow.
Climate Controls To replace the passenger compartment air filter: 1. Turn the ignition to ON/RUN with the engine off. 2. Turn on the windshield wipers and turn the ignition off again when the wipers are straight up on the windshield. The passenger compartment air filter is located under the hood below the windshield wiper arm and the screen on the passenger side of the vehicle. See Engine Compartment Overview on page 9‑6 for more information on location. This allows access to the leaf screen.
7-8 Climate Controls 2 NOTES
Driving and Operating Driving and Operating Driving Information Driving for Better Fuel Economy . . . . . . . . . . . . . . . . . . . . 8-2 Defensive Driving . . . . . . . . . . . . . 8-3 Drunk Driving . . . . . . . . . . . . . . . . . 8-3 Control of a Vehicle . . . . . . . . . . . 8-4 Braking . . . . . . . . . . . . . . . . . . . . . . . 8-4 Steering . . . . . . . . . . . . . . . . . . . . . . . 8-5 Off-Road Recovery . . . . . . . . . . . . 8-6 Loss of Control . . . . . . . . . . . . . . . .
8-2 Driving and Operating Fuel Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 8-49 Recommended Fuel . . . . . . . . . 8-49 Gasoline Specifications . . . . . . 8-50 California Fuel Requirements . . . . . . . . . . . . . . 8-50 Fuels in Foreign Countries . . . 8-50 Fuel Additives . . . . . . . . . . . . . . . 8-50 Filling the Tank . . . . . . . . . . . . . . 8-52 Filling a Portable Fuel Container . . . . . . . . . . . . . . . . . . . 8-53 Towing General Towing Information . . . . . . . . . . . . .
Driving and Operating Defensive Driving Defensive driving means “always expect the unexpected.” The first step in driving defensively is to wear your safety belt, see Safety Belts on page 2‑11. { WARNING Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what they might do and be ready. In addition: . . Allow enough following distance between you and the driver in front of you. Focus on the task of driving.
8-4 Driving and Operating spinal cord, or heart. This means that when anyone who has been drinking — driver or passenger — is in a crash, that person's chance of being killed or permanently disabled is higher than if the person had not been drinking. Control of a Vehicle The following three systems help to control the vehicle while driving — brakes, steering, and accelerator. At times, as when driving on snow or ice, it is easy to ask more of those control systems than the tires and road can provide.
Driving and Operating If the engine ever stops while the vehicle is being driven, brake normally but do not pump the brakes. If the brakes are pumped, the pedal could get harder to push down. If the engine stops, there will still be some power brake assist but it will be used when the brake is applied. Once the power assist is used up, it can take longer to stop and the brake pedal will be harder to push. Adding non-dealer/non-retailer accessories can affect vehicle performance.
8-6 Driving and Operating Steering in Emergencies Off-Road Recovery There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you. These problems can be avoided by braking — if you can stop in time. But sometimes you cannot stop in time because there is no room.
Driving and Operating tire contacts the pavement edge. Then turn the steering wheel to go straight down the roadway. Loss of Control Let us review what driving experts say about what happens when the three control systems — brakes, steering, and acceleration — do not have enough friction where the tires meet the road to do what the driver has asked. In any emergency, do not give up. Keep trying to steer and constantly seek an escape route or area of less danger.
8-8 Driving and Operating Competitive Driving Competitive driving may affect the vehicle warranty. See the warranty book before using the vehicle for competitive driving. Notice: If you use your vehicle for competitive driving, the engine may use more oil than it would with normal use. Low oil levels can damage the engine. Be sure to check the oil level often during competitive driving and keep the level at or near the upper mark that shows the proper operating range on the engine oil dipstick.
Driving and Operating Hydroplaning Hydroplaning is dangerous. Water can build up under your vehicle's tires so they actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road. There is no hard and fast rule about hydroplaning. The best advice is to slow down when the road is wet. Other Rainy Weather Tips Besides slowing down, other wet weather driving tips include: 8-9 .
8-10 Driving and Operating { WARNING Coasting downhill in N (Neutral) or with the ignition off is dangerous. The brakes will have to do all the work of slowing down and they could get so hot that they would not work well. You would then have poor braking or even none going down a hill. You could crash. Always have the engine running and the vehicle in gear when going downhill. . Stay in your own lane. Do not swing wide or cut across the center of the road.
Driving and Operating Blizzard Conditions Being stuck in snow can be a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the Roadside Service on page 12‑6. To get help and keep everyone in the vehicle safe: . Turn on the hazard warning flashers. . Tie a red cloth to an outside mirror. WARNING (Continued) If the vehicle is stuck in the snow: . . Check again from time to time to be sure snow does not collect there. .
8-12 Driving and Operating Repeat this until help arrives but only when you feel really uncomfortable from the cold. Moving about to keep warm also helps. If it takes some time for help to arrive, now and then when you run the engine, push the accelerator pedal slightly so the engine runs faster than the idle speed. This keeps the battery charged to restart the vehicle and to signal for help with the headlamps. Do this as little as possible to save fuel.
Driving and Operating Two labels on the vehicle show how much weight it may properly carry, the Tire and Loading Information label and the Certification label. Tire and Loading Information Label number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds. The Tire and Loading Information label also shows the tire size of the original equipment tires (C) and the recommended cold tire inflation pressures (D).
8-14 Driving and Operating Steps for Determining Correct Load Limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity.
Driving and Operating 8-15 seating positions. The combined weight of the driver, passengers, and cargo should never exceed the vehicle's capacity weight. Certification Label Example 2 A. Vehicle Capacity Weight for Example 2 = 453 kg (1,000 lbs). B. Subtract Occupant Weight @ 68 kg (150 lbs) × 5 = 340 kg (750 lbs). C. Available Cargo Weight = 113 kg (250 lbs). Example 3 A. Vehicle Capacity Weight for Example 3 = 453 kg (1,000 lbs). B.
8-16 Driving and Operating The GVWR includes the weight of the vehicle, all occupants, fuel, and cargo. Never exceed the GVWR for the vehicle, or the Gross Axle Weight Rating (GAWR) for either the front or rear axle. If the vehicle is carrying a heavy load, it should be spread out. See “Steps for Determining Correct Load Limit” earlier in this section.
Driving and Operating Starting and Operating . Avoid downshifting to brake or slow the vehicle when the engine speed will exceed 4000 RPM. New Vehicle Break-In . Do not let the engine labor. Never lug the engine in high gear at low speeds. With a manual transmission, shift to the next lower gear. This rule applies at all times, not just during the break-in period. Follow these recommended guidelines during the first 2 414 km/1,500 miles of driving this vehicle.
8-18 Driving and Operating Ignition Positions (Key Access) The key can be turned to four different positions. To shift out of P (Park), the ignition must be in the ON/RUN or ACC/ ACCESSORY and the brake pedal must be applied. Notice: Using a tool to force the key from its cylinder could cause damage or break the key. Use the correct key and turn the key only with your hand. Make sure the key is all the way in.
Driving and Operating Ignition Positions (Keyless Access) You can turn the ignition control knob to four different positions. To shift out of P (Park), ignition must be in the ON/RUN or ACC/ ACCESSORY and the regular brake pedal must be applied. Make sure the keyless access transmitter is inside the vehicle when trying to turn the ignition control knob. If you need to shift the transmission out of P (Park), the ignition control knob has to be in ACC/ ACCESSORY or ON/RUN.
8-20 Driving and Operating Power to the windows or sunroof will work up to 10 minutes or until any door is opened. For an additional 10 minutes of operation, close all the doors and turn the key to ON/RUN and then back to LOCK/OFF. Starting the Engine Place the transmission in the proper gear. If the vehicle has the keyless access system, the keyless access transmitter must be authenticated in order for the ignition control knob to turn.
Driving and Operating Starting Procedure 1. With your foot off the accelerator pedal, turn the ignition key to START. If the vehicle has the keyless access system, push the ignition control knob in and rotate the knob to the START position. When the engine starts, let go of the ignition. The idle speed will go down as your engine gets warm. Do not race the engine immediately after starting it. Operate the engine and transmission gently to allow the oil to warm up and lubricate all moving parts.
8-22 Driving and Operating Engine Coolant Heater Vehicles with the engine coolant heater can use this option in cold weather conditions at or below −18°C (0°F) for easier starting and better fuel economy during engine warm-up. Plug in the coolant heater at least four hours before starting your vehicle. An internal thermostat in the plug-end of the cord may exist which will prevent engine coolant heater operation at temperatures above −18°C (0°F). To Use the Engine Coolant Heater 1. Turn off the engine.
Driving and Operating 2. Move the shift lever into P (Park) by holding in the button on the shift lever and pushing the lever all the way toward the front of the vehicle. 3. Turn the ignition key to LOCK/OFF. 4. For vehicles with key access, remove the key and take it with you. If you can leave the vehicle with the ignition key in your hand, the vehicle is in P (Park). Vehicles with the keyless access system, take the keyless access transmitter with you.
8-24 . Driving and Operating Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN or ACC/ ACCESSORY and the brake pedal is applied. The shift lock release is always functional except in the case of an uncharged or low voltage (less than 9 volt) battery. If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting on page 9‑103 for more information. To shift out of P (Park) use the following: 1.
Driving and Operating Engine Exhaust { WARNING Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: . The vehicle idles in areas with poor ventilation (parking garages, tunnels, deep snow that may block underbody airflow or tail pipes). . The exhaust smells or sounds strange or different. . The exhaust system leaks due to corrosion or damage. .
8-26 Driving and Operating { WARNING It can be dangerous to get out of the vehicle if the automatic transmission shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. Do not leave the vehicle when the engine is running unless you have to. If you have left the engine running, the vehicle can move suddenly. You or others could be injured.
Driving and Operating the shift lever button before you can shift from P (Park) when the ignition key is in ON/RUN. If you cannot shift out of P (Park), ease pressure on the shift lever and push the shift lever all the way into P (Park) as you maintain brake application. Then press the shift lever button and move the shift lever into another gear. See Shifting Out of Park on page 8‑23. Notice: Shifting to R (Reverse) while the vehicle is moving forward could damage the transmission.
8-28 Driving and Operating M (Manual Mode): This position allows the driver to select the range of gears appropriate for current driving conditions. See Driver Shift Control (DSC) later in this section. Notice: Spinning the tires or holding the vehicle in one place on a hill using only the accelerator pedal may damage the transmission. If you are stuck, do not spin the tires. When stopping on a hill, use the brakes to hold the vehicle in place.
Driving and Operating To use the DSC feature with the steering wheel paddles (if equipped): 3. When in DSC, you can exit back into sport mode by continuously holding the upshift paddle (right hand side) for approximately one second. 8-29 CTS-V vehicles use tracer lights around the outside of the tachometer as a performance up-shift light. These tracers flash to indicate when to shift to the next higher gear to avoid the engine speed limit. See Tachometer on page 4‑17 for more information.
8-30 Driving and Operating If shifting is prevented for any reason, the currently selected gear will flash multiple times, indicating that the transmission has not shifted gears. While in the DSC mode, the CTS automatic transmission will automatically downshift when the vehicle comes to a stop. This will allow for more power during acceleration. The CTS-V automatic transmission will not automatically downshift on hard acceleration when in DSC mode.
Driving and Operating 2 (Second): Press the clutch pedal as you let up on the accelerator pedal and shift into 2 (Second). Then, slowly let up on the clutch pedal as you press the accelerator pedal. R (Reverse): To back up, press down the clutch pedal, completely stop the vehicle, and shift into R (Reverse). Let up on the clutch pedal slowly while pressing the accelerator pedal.
8-32 Driving and Operating Up-Shift Light CTS vehicles with a manual transmission have an up-shift light on the instrument panel. This light shows when to shift to the next higher gear for the best fuel economy. When this light comes on, you can shift to the next higher gear if weather, road, and traffic conditions allow. For the best fuel economy, accelerate slowly and shift when the light comes on.
Driving and Operating Brakes Antilock Brake System (ABS) This vehicle has the Antilock Brake System (ABS), an advanced electronic braking system that helps prevent a braking skid. When the engine is started and the vehicle begins to drive away, ABS checks itself. A momentary motor or clicking noise might be heard while this test is going on, and it might even be noticed that the brake pedal moves a little. This is normal. If there is a problem with ABS, this warning light stays on.
8-34 Driving and Operating Parking Brake (Manual) If the ignition is on, the brake system warning light on the instrument panel cluster should come on. If it does not, you need to have the vehicle serviced. See Brake System Warning Light on page 4‑26 for more information. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving.
Driving and Operating Parking Brake (Electric) The system has two warning lights and five Driver Information Center (DIC) messages. See Brake System Warning Light on page 4‑26 and Driver Information Center (DIC) on page 4‑31 for more information. In case of insufficient electrical power, the EPB cannot be applied or released. { WARNING On vehicles with a manual transmission, releasing the clutch and pressing the accelerator will release the Electric Parking Brake.
8-36 Driving and Operating If the EPB is applied while the vehicle is in motion, a chime will sound, and the DIC message “Release Park Brake Switch” will be displayed. The vehicle will decelerate as long as the switch is held in the up position. Releasing the EPB switch during the deceleration will release the parking brake. If the switch is held in the up position until the vehicle comes to a stop, the EPB will remain applied.
Driving and Operating Automatic EPB Release The EPB will automatically release if the vehicle is running, placed into gear and an attempt is made to drive away. Avoid rapid acceleration when the EPB is applied, to preserve park brake lining life. The EPB can also be used to prevent roll back for vehicles with a manual transmission taking off on a hill.
8-38 Driving and Operating or snow and rocking the vehicle is required. See If the Vehicle is Stuck on page 8‑12 for more information. See Winter Driving on page 8‑10 for information on using TCS when driving in snowy or icy conditions. StabiliTrak System The TCS/StabiliTrak warning light flashes when the traction control system is limiting wheel spin. The TCS/StabiliTrak warning light comes on if there is a problem with the traction control system.
Driving and Operating When the system activates, the Traction Control System (TCS)/ StabiliTrak warning light flashes on the instrument panel. A noise may be heard or a vibration may be felt in the brake pedal. This is normal. Continue to steer the vehicle in the intended direction. If there is a problem detected with StabiliTrak, SERVICE STABILITRAK displays on the Driver Information Center (DIC) and the TCS/StabiliTrak warning light comes on the instrument panel cluster.
8-40 Driving and Operating Competitive Driving Mode Competitive Driving Mode To select this optional handling mode, press the TCS/StabiliTrak button quickly two times and STABILITRAK COMPETITIVE MODE displays in the Driver Information Center (DIC). While in the StabiliTrak Competitive Mode, the TCS/StabiliTrak warning light comes on, TCS does not limit wheel spin, and more effort is required to turn the steering wheel. Adjust your driving accordingly.
Driving and Operating The Driver Information Center (DIC) briefly displays SUSPENSION MODE TOURING or SUSPENSION MODE SPORT on vehicle startup or when a new mode is selected. Press and release this button, located in the center of the instrument panel, to change modes. Limited-Slip Rear Axle Vehicles with a limited-slip rear axle can give more traction on snow, mud, ice, sand or gravel. When traction is low, this feature allows the drive wheel with the most traction to move the vehicle.
8-42 Driving and Operating SET − (Set/Coast): Press to set the speed or make the vehicle decelerate. [ (Cancel): Press to cancel cruise control without erasing the set speed from memory. WARNING (Continued) You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. Setting Cruise Control Cruise control will not work if the parking brake is set, or if the master cylinder brake fluid level is low.
Driving and Operating The vehicle goes back to the previously set speed and stays there. Increasing Speed While Using Cruise Control To increase the cruise speed while using cruise control: . . Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it. To increase vehicle speed in small increments, press the +RES button. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster.
8-44 Driving and Operating Object Detection Systems Ultrasonic Parking Assist For vehicles with the Ultrasonic Rear Parking Assist (URPA) system, it assists the driver with parking and avoiding objects while in R (Reverse). URPA operates at speeds less than 8 km/h (5 mph), and the sensors on the rear bumper detect objects up to 2.4m (8 ft.) behind the vehicle, and at least 25.4 cm (10 in.) off the ground. { WARNING The Ultrasonic Rear Parking Assist (URPA) system does not replace driver vision.
Driving and Operating How the System Works URPA comes on automatically and the display briefly illuminates to indicate the system is working when the shift lever is moved into R (Reverse). The following describes how the URPA display lights appear as the vehicle gets closer to a detected object: Description Metric English amber light 2.4 m 8 ft. amber/amber lights 1.0 m 40 in. If the vehicle is traveling faster then 8 km/h (5 mph) in reverse, the red light on the rear display flashes.
8-46 Driving and Operating When the System Does Not Seem to Work Properly If the URPA system will not activate due to a temporary condition, the message PARK ASSIST OFF will be displayed on the DIC and a red light will be shown on the rear URPA display when the shift lever is moved into R (Reverse). This occurs under the following conditions: . The driver disables the system. . The ultrasonic sensors are not clean. Keep the vehicle's rear bumper free of mud, dirt, snow, ice and slush.
Driving and Operating WARNING (Continued) speed backing maneuvers or where there could be cross-traffic. Your judged distances using the screen will differ from actual distances. So if you do not use proper care before backing up, you could hit a vehicle, child, pedestrian, bicyclist, or pet, resulting in vehicle damage, injury, or death. Even though the vehicle has the RVC system, always check carefully before backing up by checking behind and around the vehicle.
8-48 Driving and Operating When the System Does Not Seem To Work Properly The area displayed by the camera is limited and does not display objects that are close to either corner or under the bumper. The area displayed can vary depending on vehicle orientation or road conditions. The distance of the image that appears on the screen differs from the actual distance.
Driving and Operating 8-49 The VIN is at the top left of the instrument panel. See Vehicle Identification Number (VIN) on page 11‑1. Fuel Use of the recommended fuel is an important part of the proper maintenance of this vehicle. To help keep the engine clean and maintain optimum vehicle performance, we recommend the use of gasoline advertised as TOP TIER Detergent Gasoline. Recommended Fuel If the vehicle has a V6 engine, use regular unleaded gasoline with a posted octane rating of 87 or higher.
8-50 Driving and Operating unleaded gasoline with an octane rating of 87 or higher. If 87 octane fuel is used, do not perform any aggressive driving maneuvers such as wide open throttle applications. You might also hear audible spark knock during acceleration. Refill the tank with premium fuel as soon as possible to avoid damaging the engine. If heavy knocking is heard when using gasoline rated at 91 octane or higher, the engine needs service.
Driving and Operating However, some gasolines contain only the minimum amount of additive required to meet U.S. Environmental Protection Agency regulations. To help keep fuel injectors and intake valves clean, or if the vehicle experiences problems due to dirty injectors or valves, look for gasoline that is advertised as TOP TIER Detergent Gasoline. Look for the TOP TIER label on the fuel pump to ensure gasoline meets enhanced detergency standards developed by the auto companies.
8-52 Driving and Operating Filling the Tank Lamp could turn on. See Malfunction Indicator Lamp on page 4‑23. { WARNING Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. Turn off the engine when refueling. Do not smoke near fuel or when refueling the vehicle. Do not use cellular phones. Keep sparks, flames, and smoking materials away from fuel.
Driving and Operating The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. See Malfunction Indicator Lamp on page 4‑23. { WARNING If a fire starts while you are refueling, do not remove the nozzle. Shut off the flow of fuel by shutting off the pump or by notifying the station attendant. Leave the area immediately.
8-54 Driving and Operating Towing General Towing Information Only use towing equipment that has been designed for the vehicle. Contact your dealer/retailer or trailering retailer for assistance with preparing the vehicle for towing a trailer. See the following trailer towing information in this section: . For information on driving while towing a trailer, see “Driving Characteristics and Towing Tips”. . For maximum vehicle and trailer weights, see “Trailer Towing”. .
Driving and Operating Pulling A Trailer . Here are some important points: . There are many laws, including speed limit restrictions that apply to trailering. Check for legal requirements with state or provincial police. . Do not tow a trailer at all during the first 1 600 km (1,000 miles) the new vehicle is driven. The engine, axle or other parts could be damaged. . During the first 800 km (500 miles) that a trailer is towed, do not drive over 80 km/h (50 mph) and do not make starts at full throttle.
8-56 Driving and Operating Following Distance Making Turns Stay at least twice as far behind the vehicle ahead as you would when driving the vehicle without a trailer. This can help to avoid situations that require heavy braking and sudden turns. Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. The vehicle could be damaged. Avoid making very sharp turns while trailering. Passing When turning with a trailer, make wider turns than normal.
Driving and Operating When towing at high altitude on steep uphill grades, consider the following: Engine coolant will boil at a lower temperature than at normal altitudes. If the engine is turned off immediately after towing at high altitude on steep uphill grades, the vehicle may show signs similar to engine overheating. To avoid this, let the engine run while parked, preferably on level ground, with the automatic transmission in P (Park) for a few minutes before turning the engine off.
8-58 Driving and Operating Maintenance When Trailer Towing Trailer Towing (Except CTS-V) The vehicle needs service more often when pulling a trailer. See this manual's Maintenance Schedule or Index for more information. Things that are especially important in trailer operation are automatic transmission fluid, engine oil, axle lubricant, belts, cooling system and brake system. It is a good idea to inspect these before and during the trip.
Driving and Operating the vehicle, it will reduce the tongue weight the vehicle can carry, which will also reduce the trailer weight the vehicle can tow. If towing a trailer, the tongue load must be added to the GVW because the vehicle will be carrying that weight, too. See Vehicle Load Limits on page 8‑12 for more information about the vehicle's maximum load capacity. After loading the trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper.
8-60 Driving and Operating Safety Chains Always attach chains between the vehicle and the trailer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the hitch. Leave enough slack so the rig can turn. Never allow safety chains to drag on the ground.
Vehicle Care Vehicle Care General Information General Information . . . . . . . . . . . 9-2 California Proposition 65 Warning . . . . . . . . . . . . . . . . . . 9-3 California Perchlorate Materials Requirements . . . . . . . . . . . . . . . 9-3 Accessories and Modifications . . . . . . . . . . . . . . . . 9-3 Vehicle Checks Doing Your Own Service Work . . . . . . . . . . . . . . . . 9-4 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5 Engine Compartment Overview . . . . . . . . . . . . . . .
9-2 Vehicle Care Wheels and Tires Tires . . . . . . . . . . . . . . . . . . . . . . . . . Winter Tires . . . . . . . . . . . . . . . . . . Low-Profile Tires . . . . . . . . . . . . . Tire Sidewall Labeling . . . . . . . Tire Designations . . . . . . . . . . . . Tire Terminology and Definitions . . . . . . . . . . . . . . . . . . Tire Pressure . . . . . . . . . . . . . . . . Tire Pressure for High-Speed Operation . . . . . . . . . . . . . . . . . . Tire Pressure Monitor System . . . . . . . . . . . . . . .
Vehicle Care California Proposition 65 Warning Accessories and Modifications Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals.
9-4 Vehicle Care Vehicle Checks Doing Your Own Service Work { WARNING You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. . Be sure you have sufficient knowledge, experience, the proper replacement parts, and tools before attempting any vehicle maintenance task. (Continued) WARNING (Continued) . Be sure to use the proper nuts, bolts, and other fasteners. English and metric fasteners can be easily confused.
Vehicle Care Hood To open the hood: 1. Pull the hood release lever with this symbol on it. It is located inside the vehicle on the lower left side of the instrument panel. 2. Then go to the front of the vehicle and find the secondary hood release lever. The lever is located under the front edge of the grille near the center. Push the release lever up and raise the hood. Before closing the hood, be sure all the filler caps are on properly. Then pull the hood down and close it firmly.
9-6 Vehicle Care Engine Compartment Overview CTS 3.6 L V6 Engine shown, 3.
Vehicle Care A. Windshield Washer Fluid Reservoir. See Washer Fluid on page 9‑25. B. Engine Compartment Fuse Block (CTS) on page 9‑41 or Engine Compartment Fuse Block (CTS-V) on page 9‑45 or Engine Compartment Fuse Block (CTS Wagon) on page 9‑48. C. Remote Positive (+) Terminal. See Jump Starting on page 9‑103. D. Remote Negative (−) Terminal. See Jump Starting on page 9‑103. E. Passenger Compartment Air Filter. See Passenger Compartment Air Filter on page 7‑6. F. Engine Cooling Fan.
9-8 Vehicle Care CTS-V 6.
Vehicle Care A. Windshield Washer Fluid Reservoir. See Washer Fluid on page 9‑25. H. Intercooler System Pressure Cap. See Cooling System on page 9‑18. B. Engine Compartment Fuse Block (CTS) on page 9‑41 or Engine Compartment Fuse Block (CTS-V) on page 9‑45 or Engine Compartment Fuse Block (CTS Wagon) on page 9‑48. I. C. Remote Positive (+) Terminal. See Jump Starting on page 9‑103. D. Remote Negative (−) Terminal. See Jump Starting on page 9‑103. Engine Cover Engine Cover (CTS) Engine Cooling Fans.
9-10 Vehicle Care 4. Lift and remove the engine cover. 5. Reverse Steps 1 through 4 to reinstall engine cover. Engine Cover (CTS-V) 1. Raise the front of engine cover (A) to release from the ball studs (B). 2. Pull the engine cover forward until clear of the smaller piece. 3. Lift and remove the engine cover. 4. Reverse Steps 1 through 3 to reinstall engine cover. Engine Oil Checking Engine Oil To remove: The engine cover consists of two pieces.
Vehicle Care Notice: Do not add too much oil. If the engine has so much oil that the oil level gets above the cross-hatched area that shows the proper operating range, the engine could be damaged. See Engine Compartment Overview on page 9‑6 for the location of the engine oil fill cap. Add enough oil to put the level somewhere in the proper operating range. Push the dipstick all the way back in when through. What Kind of Engine Oil to Use Look for three things: .
9-12 Vehicle Care Substitute Engine Oil: When adding oil to maintain engine oil level, oil meeting GM Standard GM4718M might not be available. You can add substitute oil designated SAE 5W-30 with the starburst symbol at all temperatures. Substitute oil not meeting GM Standard GM4718M should not be used for an oil change. Engine Oil Additives / Engine Oil Flushes Do not add anything to the oil.
Vehicle Care How to Reset the Engine Oil Life System Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system: 1. Turn the ignition to ON/RUN with the engine off. 2. Fully press and release the accelerator pedal three times within five seconds. If the “Change Engine Oil Soon” message is not on, the system is reset. The system is reset when the “Change Engine Oil Soon” message is off.
9-14 Vehicle Care Change the fluid and filter at the intervals listed in Scheduled Maintenance on page 10‑3, and be sure to use the fluid listed in Recommended Fluids and Lubricants on page 10‑7. Manual Transmission Fluid It is not necessary to check the manual transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to a dealer/ retailer for service. Have it repaired as soon as possible.
Vehicle Care Engine Air Cleaner/Filter The engine air cleaner/filter is in the engine compartment on the driver side of the vehicle, near the front. See Engine Compartment Overview on page 9‑6 for more information on location. When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the Maintenance II intervals and replace it at the first oil change after each 80 000 km (50,000 mile) interval. See Scheduled Maintenance on page 10‑3 for more information.
9-16 Vehicle Care 6. Remove the three air cleaner housing cover screws. 7. Move the air cleaner housing cover and remove the cover from the air cleaner housing. 8. Remove the air cleaner filter from the air cleaner housing.
Vehicle Care How to Reinstall Engine Air Cleaner/Filter 4. Install the air cleaner housing cover screws. 1. Install the air cleaner into the air cleaner housing. The outer air cleaner filter seal must be fitted properly in the air cleaner housing. 5. Install the hose to the air cleaner housing mounting arm. The hose must be routed correctly. 2. Align the air cleaner housing cover tabs to the air cleaner housing. 7. Tighten the air cleaner outlet duct screw clamp. 3.
9-18 Vehicle Care Cooling System The cooling system allows the engine to maintain the correct working temperature. When you decide it is safe to lift the hood, here is what you will see: { WARNING An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan. { WARNING Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them.
Vehicle Care What to Use { WARNING Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle's coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned.
9-20 Vehicle Care If the engine is warm or hot, the coolant level should be at or above the FROID/FULL COLD line on the side of the coolant surge tank. If the engine is cold, the coolant level should be near the FROID/FULL COLD line on the side of the coolant surge tank. If it is not, there could be a leak in the cooling system. How to Add Coolant to the Surge Tank { WARNING You can be burned if you spill coolant on hot engine parts.
Vehicle Care 9-21 By this time, the coolant level inside the coolant surge tank may be lower. If the level is lower, add more of the proper mixture to the coolant surge tank until the level reaches the FROID/FULL COLD line on the side of the coolant surge tank. 5. Then replace the pressure cap. Be sure the pressure cap is hand-tight and fully seated. 2. Then keep turning the pressure cap slowly and remove it. 3.
9-22 Vehicle Care Checking Coolant in the Intercooler System (CTS-V) The vehicle must be on a level surface when checking the coolant level. Adding Coolant to the Intercooler System Coolant (CTS-V) The super charged engine intercooler coolant fill neck is located in the engine compartment on the passenger side of the vehicle. See Engine Compartment Overview on page 9‑6. On the coolant fill neck, there is a cold fill region between the two horizontal lines shown.
Vehicle Care Notice: If the pressure cap is not tightly installed, coolant loss and possible engine damage may occur. Be sure the cap is properly and tightly secured. If the coolant is not at the proper level when the system cools down again, see your dealer/retailer. Engine Overheating The vehicle has several indicators to warn of engine overheating. There are two engine hot messages that may be displayed in the Driver Information Center (DIC).
9-24 Vehicle Care If No Steam Is Coming From The Engine Compartment If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: . Climbs a long hill on a hot day. . Stops after high-speed driving. . Idles for long periods in traffic. . Tows a trailer. If the overheat warning is displayed with no sign of steam: 1. Turn the air conditioning off. 2.
Vehicle Care Power Steering Fluid How to Check Power Steering Fluid To check the power steering fluid: 1. Turn the key off and let the engine compartment cool down. 2. Wipe the cap and the top of the reservoir clean. See Engine Compartment Overview on page 9‑6 for the location of the power steering fluid reservoir. When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise.
9-26 Vehicle Care Adding Washer Fluid The Washer Fluid Low Add Fluid message will appear on the Driver Information Center (DIC) when the fluid level is low. See Driver Information Center (DIC) on page 4‑31 for more information. Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview on page 9‑6 for reservoir location. Notice: . When using concentrated washer fluid, follow the manufacturer's instructions for adding water. .
Vehicle Care Some driving conditions or climates can cause a brake squeal when the brakes are first applied or lightly applied. This does not mean something is wrong with the brakes. Brake Adjustment Properly torqued wheel nuts are necessary to help prevent brake pulsation. When tires are rotated, inspect brake pads for wear and evenly tighten wheel nuts in the proper sequence to torque specifications in Capacities and Specifications on page 11‑2.
9-28 . Vehicle Care A fluid leak in the brake hydraulic system can also cause a low fluid level. Have the brake hydraulic system fixed, since a leak means that sooner or later the brakes will not work well. Do not top off the brake fluid. Adding fluid does not correct a leak. If fluid is added when the linings are worn, there will be too much fluid when new brake linings are installed. Add or remove brake fluid, as necessary, only when work is done on the brake hydraulic system.
Vehicle Care Battery The battery is in the trunk, behind the trim panel, on the passenger side of the vehicle. Refer to the replacement number shown on the original battery label when a new battery is needed. { DANGER Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.
9-30 Vehicle Care All-Wheel Drive If your vehicle is equipped with all-wheel-drive, this is an additional system that needs lubrication. some lubricant. Add enough lubricant to raise the level to the bottom of the filler plug hole. Use care not to overtighten the plug. Transfer Case What to Use When to Check Lubricant Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 10‑7.
Vehicle Care How to Check Lubricant What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 10‑7. Starter Switch Check { WARNING To get an accurate reading, the vehicle should be on a level surface. If the level is below the bottom of the filler plug hole, located on the rear axle, you'll need to add some lubricant. Add enough lubricant to raise the level to the bottom of the filler plug hole.
9-32 Vehicle Care Automatic Transmission Shift Lock Control System Check { WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 3. With the engine off, turn the ignition to ON/RUN, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer/retailer for service.
Vehicle Care Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake. . . To check the parking brake's holding ability: With the engine running and the transmission in N (Neutral), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only. To check the P (Park) mechanism's holding ability: With the engine running, shift to P (Park).
9-34 Vehicle Care 6. Replace the blade with a new one. Headlamp Aiming . Be placed so it is perpendicular to the wall. The vehicle has a visual optical headlamp aiming system. The aim has been preset at the factory and should need no further adjustment. . Not have any snow, ice, or mud on it. . However, if the vehicle is damaged in a crash, the headlamp aim may be affected and adjustment may be necessary. Be fully assembled and all other work stopped while headlamp aiming is being performed. .
Vehicle Care 9-35 To adjust the vertical aim: 1. Open the hood. See Hood on page 9‑5 for more information. High Intensity Discharge Headlamps Halogen Headlamps 2. Locate the aim dot on the lens of the low-beam headlamp. 3. Record the distance from the ground to the aim dot on the low-beam headlamp. 4. At a wall, measure from the ground upward (A) to the recorded distance from Step 3 and mark it. 5. Draw or tape a horizontal line (B) the width of the vehicle at the wall where it was marked in Step 4.
9-36 Vehicle Care Notice: Do not cover a headlamp to improve beam cut-off when aiming. Covering a headlamp may cause excessive heat build-up which may cause damage to the headlamp. 6. Turn on the low-beam headlamps and place a piece of cardboard or equivalent in front of the headlamp not being aimed. This should allow only the beam of light from the headlamp being aimed to be seen on the flat surface. The top edge of the cut-off should be positioned at the bottom edge of the horizontal tape line.
Vehicle Care Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 9‑39. For any bulb changing procedure not listed in this section, contact your dealer/retailer. Halogen Bulbs { WARNING Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package.
9-38 Vehicle Care 4. Remove the bulb socket from the lamp housing by turning the bulb socket one-quarter turn counterclockwise. License Plate Lamp (Sedan) 3. Turn the socket counterclockwise and remove it. To replace one of these bulbs: 4. Pull the bulb straight out to remove it. 5. Pull the old bulb from the lamp housing keeping the bulb straight as you pull it out. 5. Push the new bulb straight into the socket. 6. Install a new bulb. 6.
Vehicle Care License Plate Lamp (Wagon) 9-39 To replace one of these bulbs: 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into lamp assembly. 1. Open the liftgate. See Liftgate (Wagon) on page 1‑19 for more information. 7. Turn the lamp assembly into the liftgate engaging the clip side first. 8. Push on the lamp side opposite the clip until the lamp assembly snaps into place. A. Bulb Socket B. Bulb Replacement Bulbs Exterior Lamp C.
9-40 Vehicle Care Electrical System Fuses and circuit breakers protect the following in the vehicle: Electrical System Overload . Headlamp Wiring . Windshield Wiper Motor The vehicle has fuses and circuit breakers to protect against an electrical system overload. . Power Windows and other Power Accessories When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed.
Vehicle Care Fuses and Circuit Breakers The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems. To check a fuse, look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a new one of the identical size and rating.
9-42 Vehicle Care Mini-Fuses Mini-Fuses Usage Mini-Fuses AIRBAG IGN Airbag Switch Antilock Braking System (ABS) AQS/ ISRVM/ REAR CAMERA Air Quality Sensor/ Inside Rear View Mirror/Rear View Camera ABS AFS Adaptive Forward Lighting System AWD BCM 1 Body Control Module 1 BCM 2 Body Control Module 2 BCM 3 Body Control Module 3 BCM 4 Body Control Module 4 BCM 5 Body Control Module 5 BCM 6, BCM 7 Body Control Module 6 and 7 DISPLY Display Usage Air Conditioning A/C CLTCH Clutch All-Wh
Vehicle Care Mini-Fuses DRL/WSW ECM ECM/ TCM IGN Usage Daytime Running Lamps/Windshield Washer Pump LO BEAM DRL LEFT Usage Low-Beam Daytime Running Lamps (Left) Engine Control Module (ECM) LT HI BEAM Left High-Beam Headlamp ECM, Transmission Control Module (TCM), Instrument Panel Cluster (IPC), PASS-Key III+ Module LT LO BEAM Left Low-Beam Headlamp EMIS 1 Emission 1 EMIS 2 Emission 2 EVEN COILS Even Coils FRT FOG Mini-Fuses Front Fog Lamps HDLP WASH Not Used HORN Horn LTR Cigarette
9-44 Vehicle Care J-Case Fuses Usage FAN 1 Cooling Fan 1 FAN 2 Cooling Fan 2 REAR DEFOG Rear Defogger STRTR Starter SPARE Spare WSW/HTR Relays Relays Usage FAN S/P Cooling Fan Series/Parallel FAN 1 Cooling Fan 1 FAN 2 Cooling Fan 2 FOG LAMP Fog Lamps HDLP WASH Not Used Usage HI BEAM High-Beam Headlamp Horn Ignition 1 Air Conditioning Compressor Clutch IGN 1 DRL (W/O HID) LO BEAM (HID) Daytime Running Lamps (without High Intensity Discharge), Low-Beam Headlamps (High Intensity D
Vehicle Care 9-45 Engine Compartment Fuse Block (CTS-V) The underhood fuse block is located on the passenger side of the engine compartment. Mini-Fuses Lift the fuse block cover to access the fuses. Notice: Spilling liquid on any electrical components on the vehicle may damage it. Always keep the covers on any electrical component.
9-46 Vehicle Care Mini-Fuses Usage BCM 2 Body Control Module 2 BCM 3 Body Control Module 3 BCM 4 Body Control Module 4 BCM 5 Body Control Module 5 BCM 6, BCM 7 Body Control Module 6 and 7 DISPLY Display DRL LT Left Daytime Running Lamps DRL RT Right Daytime Running Lamp (DRL) DRL/WSW ECM Daytime Running Lamps/Windshield Washer Pump Engine Control Module (ECM) Mini-Fuses ECM/ TCM IGN Usage ECM, Transmission Control Module (TCM), Instrument Panel Cluster (IPC), PASS-Key III+ Module EM
Vehicle Care J-Case Fuses ABS MTR BLWR EPB Usage ABS Motor Blower Electric Park Brake Cooling Fan 1 FAN 2 Cooling Fan 2 MR Ride/ Suspension Control REAR DEFOG Rear Defogger STRTR Starter SPARE Spare WSW/HTR Relays Usage Relays FAN 1 Cooling Fan 1 SPARE Spare FAN 2 Cooling Fan 2 STRTR Starter FOG LAMP Fog Lamps FAN 1 MRTD Relays Not Used Usage A/C CMPRSR Air Conditioning Compressor Clutch FAN S/P Cooling Fan Series/Parallel HDLP WASH HI BEAM Headlamp Washer High-Beam Headlamp
9-48 Vehicle Care Engine Compartment Fuse Block (CTS Wagon) The underhood fuse block is located on the passenger side of the engine compartment. Mini-Fuses Lift the fuse block cover to access the fuses. Notice: Spilling liquid on any electrical components on the vehicle may damage it. Always keep the covers on any electrical component.
Vehicle Care Mini-Fuses AWD Usage Mini-Fuses All-Wheel Drive BCM 1 Body Control Module 1 BCM 2 Body Control Module 2 BCM 3 Body Control Module 3 BCM 4 Body Control Module 4 BCM 5 Body Control Module 5 BCM 6, BCM 7 Body Control Module 6 and 7 DISPLY Display DRL RT Right Daytime Running Lamp (DRL) Usage DRL/LT LO BEAM Daytime Running Lamps/Left Low-Beam Headlamp DRL/WSW Daytime Running Lamps/Windshield Washer Pump ECM ECM/ TCM IGN Engine Control Module (ECM) ECM, Transmission Contro
9-50 Vehicle Care Mini-Fuses Usage PWR MODING PassKey Module, Body Control Module PWR OUTLET Console Auxiliary Power Outlet RT HI BEAM Right High-Beam Headlamp RT LO BEAM Right Low-Beam Headlamp RT LO BEAM Right Low-Beam Headlamp SPARE STR/WHL/ CNTRL ABS MTR BLWR Usage ABS Motor BRK Brake VAC PUMP Vacuum Pump EPB Electric Park Brake A/C CMPRSR Air Conditioning Compressor Clutch DRL (W/O HID) LO BEAM (HID) Daytime Running Lamps (without High Intensity Discharge), Low-Beam Headlamps (Hig
Vehicle Care Relays Usage LO BEAM (W/O HID) LT DRL (HID) Low-Beam (without High Intensity Discharge), Left Daytime Running Lamp (High Intensity Discharge) PWR/TRN Powertrain REAR DEFOG RT DRL (HID) 9-51 Rear Compartment Fuse Block (CTS) The rear compartment fuse block is located on top of the battery, on the right side of the trunk. The battery access door must be removed to access the fuse block.
9-52 Vehicle Care Relays Usage Mini-Fuses REAR/FOG Not Used EE SEAT RT/POS/LP Not Used FUEL/ PUMP STOP/LP Not Used Trunk Release UNLCK Unlock AIRBAG AMP Not Used Fuel Pump LT/POS/LP Left Position Lamp TRUNK/ RELSE Mini-Fuses Usage MSM Usage Airbag System Amplifier Memory Seat Module ONSTAR OnStar® System PDM Passenger Door Module RDO Audio System Auxiliary Power Outlet RDO/SPKR Audio Speakers CNSTR/ VENT Canister Vent DR/LCK Door Lock Remote Keyless RKE/ Entry System, PASS-
Vehicle Care Circuit Breakers Usage DRV/ Left Front PWR/SEAT Power Seat LT/ REAR/ WNDW 9-53 Rear Compartment Fuse Block (CTS-V) The rear compartment fuse block is located on top of the battery, on the right side of the trunk. The battery access door must be removed to access the fuse block.
9-54 Vehicle Care Relays Usage Mini-Fuses REAR/FOG Not Used EE SEAT RT/POS/LP Not Used FUEL/ PUMP STOP/LP Not Used TRUNK/ RELSE Trunk Release UNLCK Unlock Mini-Fuses AIRBAG AMP Not Used Fuel Pump LT/POS/LP Left Position Lamp MSM Usage Airbag System Amplifier AUX/ OUTLET Auxiliary Power Outlet CNSTR/ VENT Canister Vent DR/LCK Door Lock ECM Usage Engine Control Module (ECM) Memory Seat Module ONSTAR OnStar® System PDM Passenger Door Module RDO Audio System Mini-Fuses Remote
Vehicle Care Circuit Breakers Usage DRV/ Left Front PWR/SEAT Power Seat LT/ REAR/ WNDW 9-55 Rear Compartment Fuse Block (CTS Wagon) The rear compartment fuse block is located on the passenger side of the vehicle, behind the trim panel in the rear compartment.
9-56 Vehicle Care Relays Usage REAR/FOG Not Used RT/POS/LP Not Used Mini-Fuses Usage AUX/ OUTLET Auxiliary Power Outlet STOP/LP Not Used CNSTR/ VENT Canister Vent TRUNK/ RELSE Trunk Release DR/LCK Door Lock UNLCK Unlock Mini-Fuses AIRBAG AMP ECM Usage Airbag System Amplifier FUEL/ PUMP Engine Control Module (ECM) Fuel Pump LT/POS/LP Left Position Lamp Mini-Fuses MSM Usage Memory Seat Module ONSTAR OnStar® System PDM Passenger Door Module RDO Audio System RDO/SPKR Audio Speak
Vehicle Care Mini-Fuses Usage Remote Keyless RKE/ Entry System, PASS-KEY/ Pass-Key Theft MDL Deterrent Feature Module RT/POS/LP Not Used RT/POS/LP Right Position Lamp RVC/SNSR S/ROOF Regulated Voltage Control Sensor Mini-Fuses STOP/LP THEFT/ UGDO Usage Not Used Theft Deterrent System, Universal Home Remote System TRLR/ POS/LP Trailer Turn Position Lamps WASH/ PUMP Windshield Washer Pump Circuit Breakers 9-57 Usage DRV/ Left Front PWR/SEAT Power Seat LT/ REAR/ WNDW Left Rear Window PASS/ Right
9-58 Vehicle Care Wheels and Tires Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your vehicle Warranty booklet for details. For additional information refer to the tire manufacturer. { WARNING Poorly maintained and improperly used tires are dangerous. . . Overloading your tires can cause overheating as a result of too much flexing.
Vehicle Care Winter Tires If you expect to drive on snow or ice covered roads often, you may want to get winter tires for your vehicle. All season tires provide good overall performance on most surfaces but they may not offer the traction you would like or the same level of performance as winter tires on snow or ice covered roads. Winter tires, in general, are designed for increased traction on snow and ice covered roads.
9-60 Vehicle Care (B) TPC Spec (Tire Performance Criteria Specification): Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines.
Vehicle Care and gone flat. If your vehicle has a compact spare tire, see Compact Spare Tire on page 9‑102 and If a Tire Goes Flat on page 9‑81 . The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture. (E) Tire Ply Material : The type of cord and number of plies in the sidewall and under the tread.
9-62 Vehicle Care (E) Tire Inflation: The temporary use tire or compact spare tire should be inflated to 420 kPa (60 psi). For more information on tire pressure and inflation see Tire Pressure on page 9‑66 . (F) Tire Size: A combination of letters and numbers define a tire's width, height, aspect ratio, construction type, and service description. The letter T as the first character in the tire size means the tire is for temporary use only.
Vehicle Care (E) Rim Diameter : Diameter of the wheel in inches. (F) Service Description: These characters represent the load index and speed rating of the tire. The load index represents the load carry capacity a tire is certified to carry. The speed rating is the maximum speed a tire is certified to carry a load. Tire Terminology and Definitions Air Pressure: The amount of air inside the tire pressing outward on each square inch of the tire.
9-64 Vehicle Care GAWR FRT: Gross Axle Weight Rating for the front axle. See Vehicle Load Limits on page 8‑12 . GAWR RR: Gross Axle Weight Rating for the rear axle. See Vehicle Load Limits on page 8‑12 . Intended Outboard Sidewall : The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. Kilopascal (kPa): The metric unit for air pressure. Light Truck (LT-Metric) Tire: A tire used on light duty trucks and some multipurpose passenger vehicles.
Vehicle Care Radial Ply Tire: A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim: A metal support for a tire and upon which the tire beads are seated. Sidewall: The portion of a tire between the tread and the bead. Speed Rating: An alphanumeric code assigned to a tire indicating the maximum speed at which a tire can operate. Traction: The friction between the tire and the road surface. The amount of grip provided.
9-66 Vehicle Care Tire Pressure Tires need the correct amount of air pressure to operate effectively. If your tires have too much air (over-inflation), you can get the following: . Unusual wear Notice: Do not let anyone tell . Poor handling you that under-inflation or over-inflation is all right. It is not. If your tires do not have enough air (under-inflation), you can get the following: . Rough ride . Needless damage from road hazards . Too much flexing . Too much heat .
Vehicle Care How to Check Use a good quality pocket-type gage to check tire pressure. You cannot tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they are under-inflated. Check the tire's inflation pressure when the tires are cold. Cold means your vehicle has been sitting for at least three hours or driven no more than 1.6 km (1 mile). Remove the valve cap from the tire valve stem.
9-68 Vehicle Care When you end this high-speed driving, return the tires to the cold tire inflation pressure shown on the Tire and Loading Information label. See Vehicle Load Limits on page 8‑12 and Tire Pressure on page 9‑66. Example: You will find the maximum load and inflation pressure molded on the tire's sidewall, in small letters, near the rim flange. It will read something like this: Maximum load 690 kg (1521 lbs) 300 kPa (44 psi) Max. Press.
Vehicle Care Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale.
9-70 Vehicle Care This could be an early indicator that the air pressure in the tire(s) are getting low and need to be inflated to the proper pressure. When a low tire pressure condition is detected, the TPMS illuminates the low tire pressure warning light located on the instrument panel cluster. A DIC warning message to check the pressure in a specific tire is also shown on the DIC display screen.
Vehicle Care TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle. A DIC warning message is also displayed. The low tire warning light and DIC warning message come on at each ignition cycle until the problem is corrected.
9-72 Vehicle Care The TPMS sensors can also be matched to each tire/wheel position by increasing or decreasing the tire's air pressure. If increasing the tire's air pressure, do not exceed the maximum inflation pressure indicated on the tire's sidewall. To decrease the tire's air-pressure use the pointed end of the valve cap, a pencil-style air pressure gage, or a key. You have two minutes to match the first tire/wheel position, and five minutes overall, to match all four tire/wheel positions.
Vehicle Care Tire Inspection We recommend that you regularly inspect your vehicle's tires, including the spare tire, if the vehicle has one, for signs of wear or damage. See When It Is Time for New Tires on page 9‑74 for more information. Tire Rotation Tire rotation is not recommended if the vehicle has 255/40R19 size tires on the front wheels and 285/35R19 size tires on the rear wheels. Different tire sizes should not be rotated front to rear.
9-74 Vehicle Care After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Tire and Loading Information label. See Tire Pressure on page 9‑66 and Vehicle Load Limits on page 8‑12 . Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation on page 9‑69 . Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Specifications on page 11‑2 .
Vehicle Care The vehicle needs new tires if any of the following statements are true: . You can see the indicators at three or more places around the tire. . You can see cord or fabric showing through the tire's rubber. . The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric. . The tire has a bump, bulge, or split. . The tire has a puncture, cut, or other damage that cannot be repaired well because of the size or location of the damage.
9-76 Vehicle Care GM's exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM's TPC Spec number is molded onto the tire's sidewall near the tire size. If the tires have an all-season tread design, the TPC Spec number will be followed by an MS for mud and snow.
Vehicle Care { WARNING If you use bias-ply tires on the vehicle, the wheel rim flanges could develop cracks after many miles of driving. A tire and/or wheel could fail suddenly, causing a crash. Use only radial-ply tires with the wheels on the vehicle. If you must replace your vehicle's tires with those that do not have a TPC Spec number, make sure they are the same size, load range, speed rating, and construction type (radial and bias-belted tires) as your vehicle's original tires.
9-78 Vehicle Care Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance. This applies only to vehicles sold in the United States.
Vehicle Care Traction – AA, A, B, C The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
9-80 Vehicle Care Wheel Replacement Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts, and wheel nuts should be replaced. If the wheel leaks air, replace it (except some aluminum wheels, which can sometimes be repaired). See your dealer/retailer if any of these conditions exist. Your dealer/retailer will know the kind of wheel you need.
Vehicle Care Tire Chains { WARNING Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. The area damaged by the tire chains could cause you to lose control of the vehicle and you or others may be injured in a crash.
9-82 Vehicle Care A rear blowout, particularly on a curve, acts much like a skid and may require the same correction you would use in a skid. In any rear blowout remove your foot from the accelerator pedal. Get the vehicle under control by steering the way you want the vehicle to go. It may be very bumpy and noisy, but you can still steer. Gently brake to a stop, well off the road if possible.
Vehicle Care WARNING (Continued) 3. Turn off the engine and do not restart while the vehicle is raised. 4. Do not allow passengers to remain in the vehicle. To be certain the vehicle will not move, put blocks at the front and rear of the tire farthest away from the one being changed. That would be the tire on the other side, at the opposite end of the vehicle. 9-83 This vehicle may come with a jack and spare tire or a tire sealant and compressor kit.
9-84 Vehicle Care Tire Sealant and Compressor Kit { WARNING Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has no fresh air ventilation. For more information, see Engine Exhaust on page 8‑25.
Vehicle Care 9-85 Tire Sealant This vehicle may have one of the following tire sealant and compressor kits. The kit includes: Read and follow the safe handling instructions on the label adhered to the sealant canister. A. Selector Switch (Sealant/Air or Air Only) B. On/Off Button C. Pressure Gage D. Pressure Deflation Button (If equipped) E. Tire Sealant Canister F. Sealant/Air Hose (Clear) G. Air Only Hose (Black) H. Power Plug Check the tire sealant expiration date on the sealant canister.
9-86 Vehicle Care Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire Follow the directions closely for correct sealant usage. When using the tire sealant and compressor kit during cold temperatures, warm the kit in a heated environment for 5 minutes. This will help to inflate the tire faster.
Vehicle Care Always do a safety check first. See If a Tire Goes Flat on page 9‑81. Do not remove any objects that have penetrated the tire. 1. Remove the tire sealant and compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit (Sedan) on page 9‑92 or Storing the Tire Sealant and Compressor Kit (Wagon) on page 9‑93. 2. Unwrap the sealant/air hose (F) and the power plug (H). 3. Place the kit on the ground.
9-88 Vehicle Care 10. Inflate the tire to the recommended inflation pressure using the pressure gage (C). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure on page 9‑66. The pressure gage (C) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate pressure reading. The compressor may be turned on/off until the correct pressure is reached.
Vehicle Care 18. Immediately drive the vehicle 8 km (5 miles) to distribute the sealant in the tire. 16. If the flat tire was able to inflate to the recommended inflation pressure, remove the maximum speed label from the sealant canister (E) and place it in a highly visible location. The label is a reminder not to exceed 90 km/h (55 mph) until the damaged tire is repaired or replaced. 17. Return the equipment to its original storage location in the vehicle. 19.
9-90 Vehicle Care Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) To use the air compressor to inflate a tire with air only and not sealant: Always do a safety check first. See If a Tire Goes Flat on page 9‑81. 1. Remove the tire sealant and compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit (Sedan) on page 9‑92 or Storing the Tire Sealant and Compressor Kit (Wagon) on page 9‑93. 2.
Vehicle Care 3. Place the kit on the ground. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 4. Remove the tire valve stem cap from the flat tire by turning it counterclockwise. 5. Attach the air only hose (G) onto the tire valve stem by turning it clockwise until it is tight. 6. Plug the power plug (H) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets on page 4‑12.
9-92 Vehicle Care 14. Replace the air only hose (G) and the power plug (H) and cord back in its original location. Removal and Installation of the Sealant Canister 15. Place the equipment in the original storage location in the vehicle. 1. Unwrap the sealant hose. Tire Sealant and Compressor Kit without Pressure Deflation Button To remove the sealant canister: 2. Press the canister release button. 3. Pull up and remove the canister. 4.
Vehicle Care 4. Remove the tire sealant and compressor kit (A) from the foam container (B). To store the tire sealant and compressor kit, reverse the steps. Tire Sealant and Compressor Kit with Pressure Deflation Button Storing the Tire Sealant and Compressor Kit (Wagon) 1. Open the trunk. See Trunk (Sedan) on page 1‑17. The tire sealant and compressor kit is located in the rear of the vehicle. 9-93 1. Open the liftgate. See Liftgate (Wagon) on page 1‑19. 2.
9-94 Vehicle Care Tire Changing Removing the Spare Tire and Tools (Sedan) To access the spare tire and jacking equipment: 1. Remove the spare tire cover. 2. Remove the stow rod cap by pulling it straight up off of the rod. 3. Turn the wing nut (A) on the compact spare tire (B) counterclockwise to remove. 4. Remove the spare tire and place it next to the flat tire. 5. The tools you will be using next include the jack (C), wheel wrench (D), and extension (E). Sedan A. Wing Nut B. Spare Tire C. Jack D.
Vehicle Care To access the spare tire and jacking equipment: 9-95 To remove the jack: 1. Remove the spare tire cover. 2. Remove the subwoofer (D), if the vehicle has one. To remove the subwoofer: 2.1. Turn the nut (A) counterclockwise to remove. A. Wing Nut B. Spare Tire C. Jack D. Subwoofer E. Wheel Wrench F. Extension G. Cable 2.2. Disconnect the connector wire. 2.3. Pull the subwoofer (D) up to remove it from the stow rod. 1. Remove the retainer nut (A). 3.
9-96 Vehicle Care Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before proceeding. See If a Tire Goes Flat on page 9‑81 for more information. 3. Find the jacking location using the diagram above and corresponding V-shaped locating notches located in the plastic molding. 2. Loosen the wheel nuts, but do not remove them yet, using the wheel wrench. Turn the handle about 180 degrees, then return the handle back to the starting position.
Vehicle Care { WARNING { WARNING Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tire. If it is used for anything else, you or others could be badly injured or killed if the vehicle slips off the jack. If a jack is provided with the vehicle, only use it for changing a flat tire.
9-98 Vehicle Care WARNING (Continued) changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, use a cloth or a paper towel to do this; but be sure to use a scraper or wire brush later, if needed, to get all the rust or dirt off. See If a Tire Goes Flat on page 9‑81. 9. Remove all the wheel nuts and the flat tire. { WARNING Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time.
Vehicle Care 13. Tighten each wheel nut by turning it clockwise with your hand until the wheel is held against the hub. 14. Lower the vehicle by turning the wheel wrench counterclockwise. Lower the jack completely. { WARNING Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque specification after replacing.
9-100 Vehicle Care Storing the Flat Tire with a Flat Load Floor (Wagon) 1. Return all tools as they were stored in the rear storage compartment and put the compartment cover on. 2. Put the flat tire in the tire storage bag, if there is one. 3. Place the tire, lying flat, in the rear storage compartment. 4. Route the loop end of the strap (C) through one of the cargo tie-downs (A) located in the rear of the vehicle. 5. Route the hook (B) through the loop (C). 6.
Vehicle Care 5. Slide both D-rings (E) on each side of the vehicle as far rearward as they will go. 6. Route one hook (A) under the wheel spoke (C) and place the hook into the slot in the cargo rail on the driver side of the vehicle. Compact Spare Tire and Tools (Sedan) D. Wheel Wrench Use the following diagram as a guide for storing the compact spare tire and tools in the trunk: F. Strap 7. Slide the D-ring (E) on that side forward to engage the hook. 8.
9-102 Vehicle Care Compact Spare Tire Compact Spare Tire and Tools (Wagon) { WARNING Use the following diagram as a guide for storing the compact spare tire and tools in the rear compartment area: Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a crash and you or others could be injured. Use only one compact spare tire at a time. A. Wing Nut B. Spare Tire C. Jack D. Subwoofer E. Wheel Wrench F. Extension G.
Vehicle Care convenience. Of course, it is best to replace the spare with a full-size tire as soon as possible. The spare tire will last longer and be in good shape in case it is needed again. Notice: When the compact spare is installed, do not take the vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails which can damage the tire, wheel and other parts of the vehicle. Do not use the compact spare on other vehicles.
9-104 Vehicle Care 2. Get the vehicles close enough so the jumper cables can reach, but be sure the vehicles are not touching each other. If they are, it could cause a ground connection you do not want. You would not be able to start your vehicle and the bad grounding could damage the electrical systems. To avoid the possibility of the vehicles rolling, set the parking brake firmly on both vehicles involved in the jump start procedure.
Vehicle Care Notice: If you connect a negative cable to the Engine Control Module (ECM), ECM mounting bracket, or any cables that attach to the ECM bracket, you may damage the ECM. Always attach the negative cable to your vehicle's remote negative ground location, instead of the ECM, ECM bracket, or any cables attached to the ECM bracket. { WARNING An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.
9-106 Vehicle Care Do not connect positive (+) to negative (−) or you will get a short that would damage the battery and maybe other parts too. And do not connect the negative (−) cable to the negative (−) terminal on the dead battery because this can cause sparks. 7. Do not let the other end touch metal. Connect it to the positive (+) terminal of the good battery. Use a remote positive (+) terminal if the vehicle has one. 8.
Vehicle Care Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by the vehicle warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal. 9-107 To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative (−) cable from the vehicle that had the dead battery. 2.
9-108 Vehicle Care Towing Towing the Vehicle Consult your dealer/retailer or a professional towing service if the disabled vehicle needs to be towed. See Roadside Service on page 12‑6. To tow the vehicle behind another vehicle for recreational purposes (such as behind a motorhome), see Recreational Vehicle Towing following. Recreational Vehicle Towing Recreational vehicle towing means towing the vehicle behind another vehicle – such as behind a motorhome.
Vehicle Care Dolly Towing (Rear-Wheel-Drive Vehicles) 9-109 3. Firmly set the parking brake. See Parking Brake (Manual) on page 8‑34 or Parking Brake (Electric) on page 8‑35. 4. Put the vehicle in P (Park) for an automatic transmission or in 1 (First) for a manual transmission. 5. Securely attach the vehicle being towed to the dolly. Notice: If the vehicle is towed with all four wheels on the ground, the drivetrain components could be damaged. The repairs would not be covered by the vehicle warranty.
9-110 Vehicle Care Dolly Towing (All-Wheel-Drive Vehicles) Appearance Care Exterior Care Cleaning Exterior Lamps/Lenses Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow instructions under “Washing the Vehicle” later in this section. Notice: Towing an all-wheel-drive vehicle with all four wheels on the ground, or even with only two of its wheels on the ground, will damage drivetrain components.
Vehicle Care Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it. Use only non-abrasive waxes and polishes that are made for a basecoat/clearcoat paint finish on the vehicle. Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage the vehicle's finish if they remain on painted surfaces. Wash the vehicle as soon as possible.
9-112 Vehicle Care Rinse the vehicle well, before washing and after to remove all cleaning agents completely. If they are allowed to dry on the surface, they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting. High pressure car washes could cause water to enter the vehicle. Avoid using high pressure washes closer than 30 cm (12 inches) to the surface of the vehicle.
Vehicle Care The surface of these wheels is similar to the painted surface of the vehicle. Do not use strong soaps, chemicals, abrasive polishes, abrasive cleaners, cleaners with acid, or abrasive cleaning brushes on them because the surface could be damaged. Do not use chrome polish on aluminum wheels. Never drive a vehicle that has aluminum or chrome-plated wheels through an automatic car wash that uses silicone carbide tire cleaning brushes.
9-114 Vehicle Care Finish Damage Any stone chips, fractures or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense. Minor chips and scratches can be repaired with touch-up materials available from your dealer/retailer. Larger areas of finish damage can be corrected in your dealer's/ retailer's body and paint shop. Underbody Maintenance Chemicals used for ice and snow removal and dust control can collect on the underbody.
Vehicle Care Your dealer/retailer has products for cleaning the vehicle's interior. When cleaning the vehicle's interior, only use cleaners specifically designed for the surfaces that are being cleaned. Permanent damage can result from using cleaners on surfaces for which they were not intended. Apply the cleaner directly to the cleaning cloth to prevent over-spray. Remove any accidental over-spray from other surfaces immediately.
9-116 Vehicle Care Fabric/Carpet To clean: Use a vacuum cleaner with a soft brush attachment to remove dust and loose dirt. A canister vacuum with a beater bar in the nozzle may only be used on floor carpet and carpeted floor mats. For soils, always try to remove them first with plain water or club soda. Before cleaning, gently remove as much of the soil as possible using one of the following techniques: 1. Saturate a lint-free, clean white cloth with water or club soda.
Vehicle Care Instrument Panel, Vinyl, and Other Plastic Surfaces To remove dust, a soft cloth dampened with water can be used. If a more thorough cleaning is necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and dirt. Never use spot lifters or removers on plastic surfaces. Many commercial cleaners and coatings that are sold to preserve and protect soft plastic surfaces may permanently change the appearance and feel of the interior and are not recommended.
9-118 Vehicle Care 2 NOTES
Service and Maintenance Service and Maintenance General Information General Information . . . . . . . . . . 10-1 Scheduled Maintenance Scheduled Maintenance . . . . . 10-3 Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants . . . . . . . . . . . . . . . . . . 10-7 Maintenance Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 10-9 Maintenance Records Maintenance Records . . . . . .
10-2 Service and Maintenance { WARNING Performing maintenance work can be dangerous. Some jobs can cause serious injury. Perform maintenance work only if you have the required know-how and the proper tools and equipment. If in doubt, see your dealer/retailer to have a qualified technician do the work. See Doing Your Own Service Work on page 9‑4. At your General Motors dealer/ retailer, you can be certain that you will receive the highest level of service available.
Service and Maintenance Scheduled Maintenance When the Change Engine Oil Soon Message Displays Change engine oil and filter. See Engine Oil on page 9‑10. An Emission Control Service. When the “Change Engine Oil Soon” message displays, service is required for the vehicle as soon as possible, within the next 1 000 km/ 600 miles. If driving under the best conditions, the engine oil life system might not indicate the need for vehicle service for more than a year.
10-4 . . . . Service and Maintenance Brake system inspection (or every 12 months, whichever occurs first). Additional Required Services Once a Year At Each Fuel Stop . Steering and suspension inspection. Visual inspection for damaged, loose, or missing parts or signs of wear. . See Starter Switch Check on page 9‑31. . See Automatic Transmission Shift Lock Control System Check on page 9‑32. . See Ignition Transmission Lock Check on page 9‑32. .
Service and Maintenance First Engine Oil Change After Every 40 000 km/25,000 Miles . . . Fuel system inspection for damage or leaks. Passenger compartment air filter replacement (or every 12 months, whichever occurs first). More frequent replacement may be required if vehicle is driven regularly under dusty conditions.
10-6 . Service and Maintenance CTS-V only: Rear axle fluid change (severe service only) for vehicles mainly driven in hilly or mountainous terrain, when frequently towing a trailer, used for high speed or competitive driving, or used for taxi, police, or delivery service. See Rear Axle on page 9‑30. First Engine Oil Change After Every 160 000 km/100,000 Miles . . Automatic transmission fluid change (normal service). See Automatic Transmission Fluid on page 9‑13.
Service and Maintenance 10-7 Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants Usage Fluid/Lubricant Engine Oil The engine requires a special engine oil meeting GM Standard GM4718M. Oils meeting this standard can be identified with the American Petroleum Institute (API) Certified for Gasoline Engines starburst symbol. However, not all synthetic API oils with the starburst symbol will meet this GM standard. Look for and use only an oil that meets GM Standard GM4718M.
10-8 Service and Maintenance Usage Manual Transmission (CTS-V) Automatic Transmission Fluid/Lubricant Manual Transmission Fluid (GM Part No. U.S. 88861800, in Canada 88861801). DEXRON®-VI Automatic Transmission Fluid. Rear Drive Module and Transfer Case Transfer Case Fluid (GM Part No. U.S. 88861950, in Canada 88861951). (All-Wheel Drive) Chassis Lubrication Chassis Lubricant (GM Part No. U.S. 12377985, in Canada 88901242) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB.
Service and Maintenance 10-9 Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your retailer. Part GM Part Number ACDelco Part Number 3.0L V6 Engine 15875795 A3096C 3.6L V6 Engine 15875795 A3096C 6.2L V8 Engine 25898499 A3105C 3.0L V6 Engine 25177917 PF2129 3.6L V6 Engine 25177917 PF2129 6.2L V8 Engine 89017524 PF48 19130403 CF133 3.0L V6 Engine 12622561 41–109 3.6L V6 Engine 12597464 41-990 6.
10-10 Service and Maintenance Part GM Part Number ACDelco Part Number Driver Side – 56.5 cm (22 in) 15890062 — Passenger Side – 53.3 cm (21 in) 15890064 — Driver Side – 56.5 cm (22 in) 20791461 — Passenger Side – 53.
Service and Maintenance 10-11 Maintenance Records After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts.
10-12 Service and Maintenance Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance Stamp Services Performed
Service and Maintenance Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance Stamp Services Performed 10-13
10-14 Service and Maintenance Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance Stamp Services Performed
Technical Data Technical Data Vehicle Identification Vehicle Identification Vehicle Identification Number (VIN) Vehicle Identification Number (VIN) . . . . . . . . . . . . . . 11-1 Service Parts Identification Label . . . . . . . . . . . . . . . . . . . . . . . 11-1 Vehicle Data Capacities and Specifications . . . . . . . . . . . . . . 11-2 Engine Drive Belt Routing . . . . 11-4 11-1 Engine Identification The eighth character in the VIN is the engine code.
11-2 Technical Data Vehicle Data Capacities and Specifications The following approximate capacities are given in metric and English conversions. See Recommended Fluids and Lubricants on page 10‑7 for more information. Application Air Conditioning Refrigerant R134a Capacities Metric English For the air conditioning system refrigerant charge amount, see the refrigerant caution label located under the hood. See your dealer/retailer for more information. Cooling System — Engine 3.0L V6 Engine 10.
Technical Data Application Capacities Metric English Fuel Tank 68.1 L 18.0 gal Transfer Case — AWD 1.0 L 1.1 qt 3.0L V6 Engine, 6-Speed Automatic 6.3 L 6.7 qt 3.6L V6 Engine, 6-Speed Automatic 6.3 L 6.7 qt 6.2L V8 Engine, 6-Speed Automatic 6.3 L 6.7 qt 3.0L, 3.6L V6 Engines, 6-Speed Manual 1.8 L 1.9 qt 6.2L V8 Engine, 6-Speed Manual 3.8 L 4.0 qt 190 Y 140 lb ft Transmission Fluid (Pan Removal and Filter Replacement) Wheel Nut Torque All capacities are approximate.
11-4 Technical Data Engine Specifications Engine VIN Code Transmission Spark Plug Gap 3.0L V6 Engine G Automatic Manual 1.1 mm (0.043 in) 3.6L V6 Engine V Automatic Manual 1.1 mm (0.043 in) 6.2L V8 Engine P Automatic Manual 1.0 mm (0.040 in) Engine Drive Belt Routing CTS 3.6L V6 Engine CTS 3.0L V6 Engine CTS-V 6.
Customer Information Customer Information Customer Information Customer Satisfaction Procedure . . . . . . . . . . . . . . . . . . 12-1 Customer Assistance Offices . . . . . . . . . . . . . . . . . . . . . 12-3 Customer Assistance for Text Telephone (TTY) Users . . . . . 12-4 Online Owner Center . . . . . . . . 12-4 GM Mobility Reimbursement Program . . . . . . . . . . . . . . . . . . . . 12-5 Roadside Service . . . . . . . . . . . . 12-6 Scheduling Service Appointments . . . . . . . . . . . . . .
12-2 Customer Information STEP TWO: If after contacting a member of dealership management, it appears your concern cannot be resolved by the dealership without further help, in the United States, call the Cadillac Customer Assistance Center, 24 hours a day, at 1-800-458-8006. In Canada, call the Canadian Cadillac Customer Communication Centre at 1-888-446-2000. We encourage you to call the toll-free number in order to give your inquiry prompt attention.
Customer Information STEP THREE (Canadian Owners): General Motors Participation in the Mediation/Arbitration Program In the event that you do not feel your concerns have been addressed after the following the procedure outlined in Steps One and Two. General Motors of Canada Limited wants you to be aware of its participation in a no-charge mediation/Arbitration program. General Motors of Canada Limited has committed to binding arbitration of owner disputes involving factory-related vehicle service claims.
12-4 Customer Information From Puerto Rico: 1-800-496-9992 (English) 1-800-496-9993 (Spanish) From U.S. Virgin Islands: 1-800-496-9994 Canada — Customer Assistance General Motors of Canada Limited Canadian Cadillac Customer Communication Centre, CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 www.gmcanada.
Customer Information Other Helpful Links: Cadillac — www.cadillac.com Cadillac Merchandise — www.cadillaccollection.com Help Center — www.cadillac.com/ helpcenter . FAQ . Contact Us My GM Canada (Canada) — www.gm.ca My GM Canada is a password-protected section of www.gm.ca where you can save information on GM vehicles, get personalized offers, and use handy tools and forms with greater ease. Here are a few of the valuable tools and services you will have access to: .
12-6 Customer Information Roadside Service Coverage Cadillac Owner Privileges™ In the United States or Canada, call 1-800-882-1112. Services are provided up to 5 years/ 100,000 miles (160 000 km), whichever comes first. . Emergency Fuel Delivery: Delivery of enough fuel for the vehicle to get to the nearest service station. . Lock-Out Service: Service is provided to unlock the vehicle if you are locked out. A remote unlock may be available if you have OnStar®.
Customer Information It is your responsibility for the repair or replacement of the tire if it is not covered by the warranty. . . . Battery Jump Start: Service is provided to jump start a dead battery. Trip Routing Service: Detailed maps of North America are provided when requested either with the most direct route or the most scenic route. Additional travel information is also available. Allow three weeks for delivery.
12-8 . . Customer Information Trip Interruption Benefits and Assistance: Pre-authorization, original detailed receipts, and a copy of the repair orders are required. Once authorization has been received, the Roadside Assistance advisor will help you make arrangements and explain how to receive payment. Alternative Service: If assistance cannot be provided right away, the Roadside Assistance advisor may give you permission to get local emergency road service.
Customer Information Transportation Options Warranty service can generally be completed while you wait. However, if you are unable to wait, GM helps to minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following: Shuttle Service Shuttle service is the preferred means of offering Courtesy Transportation.
12-10 Customer Information Additional Program Information All program options, such as shuttle service, may not be available at every dealer. Please contact your dealer for specific information about availability. All Courtesy Transportation arrangements will be administered by appropriate dealer personnel.
Customer Information Aftermarket parts are not covered by your GM New Vehicle Limited Warranty, and any vehicle failure related to such parts are not covered by that warranty. Repair Facility We recommend that you choose a collision repair facility that meets your needs before you ever need collision repairs.
12-12 Customer Information . Vehicle Identification Number (VIN) . Insurance company and policy number . General description of the damage to the other vehicle Choose a reputable repair facility that uses quality replacement parts. See “Collision Parts” earlier in this section. If the airbag has inflated, see What Will You See After an Airbag Inflates? on page 2‑33.
Customer Information In-Portfolio: Includes a Portfolio, Owner Manual, and Warranty Booklet. ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Eastern Time RETAIL SELL PRICE: $35.00 (U.S.) plus processing fee For Credit Card Orders Only (VISA-MasterCard-Discover), visit Helm, Inc. on the World Wide Web at: helminc.com Without Portfolio: Owner Manual only. RETAIL SELL PRICE: $25.00 (U.S.
12-14 Customer Information However, NHTSA cannot become involved in individual problems between you, your dealer, or General Motors. Reporting Safety Defects to the Canadian Government To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.
Customer Information Vehicle Data Recording and Privacy Your GM vehicle has a number of sophisticated computers that record information about the vehicle’s performance and how it is driven. For example, your vehicle uses computer modules to monitor and control engine and transmission performance, to monitor the conditions for airbag deployment and deploy airbags in a crash and, if so equipped, to provide antilock braking to help the driver control the vehicle.
12-16 Customer Information GM will not access this data or share it with others except: with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee; in response to an official request of police or similar government office; as part of GM's defense of litigation through the discovery process; or, as required by law.
INDEX A Accessories and Modifications . . . . . . . . . . . . . . . . . . 9-3 Accessory Power . . . . . . . . . . . . . . 8-19 Adaptive Forward Lighting (AFL) . . . . . . . . . . . . . . . . . 5-4 Add-On Electrical Equipment . . . . . . . . . . . . . . . . . . . 8-60 Adding Equipment to the Airbag-Equipped Vehicle . . . . . 2-40 Adjustment Thigh Support . . . . . . . . . . . . . . . . . 2-7 Adjustments Lumbar, Front Seats . . . . . . . . . . . 2-6 Air Cleaner/Filter, Engine . . . . . .
i-2 INDEX B Battery . . . . . . . . . . . . . . . . . . . . . . . . 9-29 Exterior Lighting Battery Saver . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Jump Starting . . . . . . . . . . . . . . . 9-103 Load Management . . . . . . . . . . . . . 5-6 Power Protection . . . . . . . . . . . . . . 5-7 Voltage and Charging Messages . . . . . . . . . . . . . . . . . . .4-37 Blade Replacement, Wiper . . . . 9-33 Bluetooth . . . . . . . . . . . . . . . . . . . . . . 6-37 Boost Gage . . . . . . . . . . . . . .
INDEX Cleaning Exterior Care . . . . . . . . . . . . . . . .9-110 Interior Care . . . . . . . . . . . . . . . . .9-114 Climate Control Systems Dual Automatic . . . . . . . . . . . . . . . . 7-1 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Cluster, IP . . . . . . . . . . . . . . . . . . . . . 4-15 Clutch, Hydraulic . . . . . . . . . . . . . . 9-14 Collision Damage Repair . . . . . 12-10 Compact Spare Tire . . . . . . . . . . 9-102 Compass . . . . . . . . . . . . . . . . . . . . . .
i-4 INDEX Driving (cont.) Off-Road Recovery . . . . . . . . . . . . 8-6 Vehicle Load Limits . . . . . . . . . . .8-12 Winter . . . . . . . . . . . . . . . . . . . . . . . .8-10 Dual Automatic Climate Control System . . . . . . . . . . . . . . . . 7-1 DVD/CD Player . . . . . . . . . . . . . . . . 6-19 E Electrical Equipment, Add-On . . . . . . . . . . . . . . . . . . . . . . 8-60 Electrical System Engine Compartment Fuse Block . . . . . . 9-41, 9-45, 9-48 Fuses and Circuit Breakers . . . . . . . . . . . .
INDEX Front Seats Adjustment . . . . . . . . . . . . . . . . . . . . 2-3 Heated and Ventilated . . . . . . . . . 2-9 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-49 Additives . . . . . . . . . . . . . . . . . . . . .8-50 Economy Driving . . . . . . . . . . . . . . 8-2 Filling a Portable Fuel Container . . . . . . . . . . . . . . . . . . .8-53 Filling the Tank . . . . . . . . . . . . . . .8-52 Fuels in Foreign Countries . . . .8-50 Gage . . . . . . . . . . . . . . . . . . . . . . . . .
i-6 INDEX Heater Engine Coolant . . . . . . . . . . . . . . .8-22 High-Beam On Light . . . . . . . . . . . 4-30 High-Speed Operation . . . . . . . . . 9-67 Highway Hypnosis . . . . . . . . . . . . . . 8-9 Hill and Mountain Roads . . . . . . . . 8-9 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 How to Wear Safety Belts Properly . . . . . . . . . . . . . . . . . . . . . . 2-15 Hydraulic Clutch . . . . . . . . . . . . . . .
INDEX Lights (cont.) Safety Belt Reminders . . . . . . . .4-21 Security . . . . . . . . . . . . . . . . . . . . . .4-30 Tire Pressure . . . . . . . . . . . . . . . . .4-29 Traction Control System (TCS)/StabiliTrak® . . . . . . . . . .4-28 Up-Shift . . . . . . . . . . . . . . . . . . . . . .4-28 Limited-Slip Rear Axle . . . . . . . . . 8-41 Locks Automatic Door . . . . . . . . . . . . . . .1-15 Central Door Unlocking System . . . . . . . . . . . . . . . . . . . . . .1-15 Delayed Locking . . . . . . . . . . .
i-8 INDEX N Navigation System Vehicle Data Recording and Privacy . . . . . . . . . . . . . . . 12-16 Net Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Net, Convenience . . . . . . . . . . . . . . 3-6 New Vehicle Break-In . . . . . . . . . . 8-17 O Object Detection System Messages . . . . . . . . . . . . . . . . . . . . 4-45 Odometer . . . . . . . . . . . . . . . . . . . . . . 4-17 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17 Off-Road Recovery . . . . . . . . . . . . . .
INDEX R Radio Frequency Identification (RFID) . . . . . . . . 12-16 Statement . . . . . . . . . . . . . . . . . . 12-16 Radios AM-FM Radio . . . . . . . . . . . . . . . . . . 6-9 CD/DVD Player . . . . . . . . . . . . . . .6-19 Reception . . . . . . . . . . . . . . . . . . . .6-15 Satellite . . . . . . . . . . . . . . . . . . . . . . . 6-11 Reading Lamps . . . . . . . . . . . . . . . . . 5-5 Rear Axle . . . . . . . . . . . . . . . . . . . . . . 9-30 Limited-Slip . . . . . . . . . . . . . . . . . . .
i-10 INDEX Safety System Check . . . . . . . . . . 2-25 Satellite Radio . . . . . . . . . . . . . . . . . 6-11 Scheduled Maintenance . . . . . . . 10-3 Scheduling Appointments . . . . . . 12-8 Sealant Kit, Tire . . . . . . . . . . . . . . . 9-84 Seats Adjustment, Front . . . . . . . . . . . . . . 2-3 Head Restraints . . . . . . . . . . . . . . . 2-2 Heated and Ventilated Front . . . 2-9 Lumbar Adjustment, Front . . . . . 2-6 Power Adjustment, Front . . . . . . 2-4 Rear . . . . . . . . . . . . . . . . . .
INDEX T Tachometer . . . . . . . . . . . . . . . . . . . . 4-17 Text Telephone (TTY) Users . . . 12-4 Theft-Deterrent Systems . . . . . . . . . . . . . . . 1-24, 1-25 Immobilizer . . . . . . . . . . . . . . . . . . .1-24 Thigh Support Adjustment . . . . . . 2-7 Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Tires Buying New Tires . . . . . . . . . . . . .9-75 Chains . . . . . . . . . . . . . . . . . . . . . . . .9-81 Changing . . . . . . . . . . . . . . . . . . . . .9-94 Compact Spare . .
i-12 INDEX U Ultrasonic Parking Assist . . . . . . 8-44 Uniform Tire Quality Grading . . . . . . . . . . . . . . . . . . . . . . 9-78 Universal Remote System . . . . . 4-61 Operation . . . . . . . . . . . . . . . . . . . . .4-65 Programming . . . . . . . . . . . . . . . . .4-61 Up-Shift Light . . . . . . . . . . . . . . . . . . 4-28 Using this Manual . . . . . . . . . . . . . . . . iv V Vehicle Canadian Owners . . . . . . . . . . . . . . .iv Control . . . . . . . . . . . . . . . . . . . . . . . .