2010 Cadillac SRX Owner Manual M Keys, Doors and Windows . . . 1-1 Keys and Locks . . . . . . . . . . . . . . . 1-2 Doors . . . . . . . . . . . . . . . . . . . . . . . . 1-13 Vehicle Security. . . . . . . . . . . . . . 1-17 Exterior Mirrors . . . . . . . . . . . . . . . 1-20 Interior Mirrors . . . . . . . . . . . . . . . . 1-22 Windows . . . . . . . . . . . . . . . . . . . . . 1-23 Roof . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26 Seats and Restraints . . . . . . . . . 2-1 Head Restraints . . .
010 Cadillac SRX Owner Manual M Vehicle Care . . . . . . . . . . . . . . . . . . 9-1 General Information . . . . . . . . . . . . 9-2 Vehicle Checks . . . . . . . . . . . . . . . . 9-4 Headlamp Aiming . . . . . . . . . . . . 9-31 Bulb Replacement . . . . . . . . . . . . 9-34 Electrical System . . . . . . . . . . . . . 9-44 Wheels and Tires . . . . . . . . . . . . . 9-52 Jump Starting . . . . . . . . . . . . . . . 9-101 Towing . . . . . . . . . . . . . . . . . . . . . . 9-105 Appearance Care . . . . . . . .
Introduction GENERAL MOTORS, GM, the GM Emblem, CADILLAC, the CADILLAC Crest and Wreath, and the name SRX are registered trademarks of General Motors. Please refer to the purchase documentation relating to your specific vehicle to confirm each of the features found on your vehicle. For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for Cadillac Motor Car Division wherever it appears in this manual.
iv Introduction Using this Manual To quickly locate information about the vehicle use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Danger, Warnings, and Cautions { WARNING These mean there is something that could hurt you or other people. Notice: This means there is something that could result in property or vehicle damage. This would not be covered by the vehicle's warranty.
Introduction Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. 0 : Adjustable Pedals 9 : Airbag Readiness Light # : Air Conditioning ! : Antilock Brake System (ABS) g : Audio Steering Wheel Controls or OnStar® $ : Brake System Warning Light " : Charging System I : Cruise Control B : Engine Coolant Temperature O : Exterior Lamps # : Fog Lamps .
vi Introduction 2 NOTES
Keys, Doors and Windows Keys, Doors and Windows Exterior Mirrors Keys and Locks Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Remote Keyless Entry (RKE) System . . . . . . . . . . . . . . . . . . . . . . 1-3 Remote Keyless Entry (RKE) System Operation . . . . . . . . . . . 1-3 Remote Vehicle Start . . . . . . . . . 1-9 Door Locks . . . . . . . . . . . . . . . . . . 1-11 Power Door Locks . . . . . . . . . . . 1-11 Safety Locks . . . . . . . . . . . . . . . . .
1-2 Keys, Doors and Windows Keys and Locks Keys { WARNING Leaving children in a vehicle with the keyless access transmitter is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keyless access transmitter in the vehicle and they could be seriously injured or killed if caught in the path of a closing window.
Keys, Doors and Windows Remote Keyless Entry (RKE) System . Check the transmitter's battery. See “Battery Replacement” later in this section. See Radio Frequency Statement on page 12‑19 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry Canada. . If the transmitter is still not working correctly, see your dealer/retailer or a qualified technician for service.
1-4 Keys, Doors and Windows Pressing Q may also arm the theft-deterrent system. See Anti-Theft Alarm System on page 1‑17. K (Unlock): Press to unlock the driver door or all doors, see “Door Unlock Options” under Vehicle Personalization on page 4‑41. When remotely unlocking the vehicle at night the fog lamps and reverse lamps will come on for about 20 seconds to light your approach to the vehicle. The turn signal indicators may flash and/or the horn may sound to indicate unlocking.
Keys, Doors and Windows Keyless Locking If the vehicle has the keyless access system, this feature allows you to select whether the doors automatically lock during normal vehicle exit. When the vehicle is turned off and all doors become closed, the vehicle will determine how many keyless access transmitters remain in the vehicle interior. If at least one keyless access transmitter has been removed from the interior of the vehicle, the doors will lock after several seconds.
1-6 Keys, Doors and Windows Keyless Liftgate Opening Press the touch pad on the liftgate handle to open the liftgate if the keyless entry transmitter is within range. Programming Transmitters to the Vehicle Only keyless entry transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer/retailer. The vehicle can be reprogrammed so that lost or stolen transmitters no longer work.
Keys, Doors and Windows 4. Press the ignition. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter. 5. Remove the transmitter from the transmitter pocket and press K on the transmitter. To program additional transmitters, repeat Steps 3 through 5. When all additional transmitters are programmed, press and hold the ignition for 5 seconds to exit programming mode.
1-8 Keys, Doors and Windows 6. Remove the transmitter from the transmitter pocket and press K on the transmitter. To start the vehicle: 1. Open the center console storage area and the storage tray. To program additional transmitters, repeat Steps 4 through 6. When all additional transmitters are programmed, press and hold the ignition for 5 seconds to exit programming mode. 4. Place the new transmitter into the transmitter pocket.
Keys, Doors and Windows 1-9 Battery Replacement Remote Vehicle Start Notice: When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. If available, this feature allows you to start the engine from outside the vehicle. / (Remote Vehicle Start): This button will be on the RKE transmitter if the vehicle has remote start. Replace the battery if the “Replace Battery in Remote Key” message displays in the DIC.
1-10 Keys, Doors and Windows Laws in some local communities may restrict the use of remote starters. For example, some laws may require a person using remote start to have the vehicle in view. Check local regulations for any requirements. There are other conditions which can affect the performance of the transmitter, see Remote Keyless Entry (RKE) System on page 1‑3 for additional information. Starting the Engine Using Remote Start To start the engine using the remote start feature: 1.
Keys, Doors and Windows . The hazard warning flashers are on. . There is an emission control system malfunction. . The engine coolant temperature is too high. . The oil pressure is low. . Two remote vehicle starts have already been used. . The vehicle is not in P (Park). WARNING (Continued) So, all passengers should wear safety belts properly and the doors should be locked whenever the vehicle is driven. . Young children who get into unlocked vehicles may be unable to get out.
1-12 Keys, Doors and Windows Lockout Deterrent Delayed Locking Lockout deterrent decreases the chances that the keys may be accidentally locked in the vehicle. When this feature is enabled and the doors are locked with the power lock switch on the instrument panel, three chimes sound to signal that the delayed locking feature is in use. All doors lock five seconds after the last door is closed.
Keys, Doors and Windows Doors WARNING (Continued) Liftgate (Manual) { WARNING Exhaust gases can enter the vehicle if it is driven with the liftgate, trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. (Continued) If the vehicle must be driven with the liftgate, or trunk/hatch open: . Close all of the windows. .
1-14 Keys, Doors and Windows Liftgate (Power) WARNING (Continued) Power Liftgate Operation . Adjust the Climate Control system to a setting that brings in only outside air and set the fan speed to the highest setting. See Climate Control System in the Index. . If the vehicle is equipped with a power liftgate, disable the power liftgate function.
Keys, Doors and Windows Notice: If you open the liftgate without checking for overhead obstructions such as a garage door, you could damage the liftgate or the liftgate glass. Always check to make sure the area above and behind the liftgate is clear before opening it. Choose the power liftgate mode by turning the dial on the switch until the indicator lines up with the desired position. OFF: The liftgate only operates manually in this position.
1-16 Keys, Doors and Windows The power liftgate may be temporarily disabled under extreme temperatures or low battery conditions. If this occurs, the liftgate can still be operated manually. If you shift the transmission out of P (Park) while the power function is in progress, the liftgate power function will continue to completion. If you shift the transmission out of P (Park) and accelerate before the power liftgate latch is closed, the liftgate may reverse to the open position.
Keys, Doors and Windows If you do not hear the audible and visual feedback when setting the intermediate stop position, you are attempting to set the height below the 3/4 open height minimum (approximately 5 feet). The liftgate cannot be set below that minimum and the new setting will not be recorded. Manual Operation of Power Liftgate To change the liftgate to manual operation, turn the mode switch to the OFF position.
1-18 Keys, Doors and Windows 3. After 30 seconds, the alarm system will arm, and the LED will begin to slowly flash indicating the alarm is operating. If a door, the hood, or liftgate is opened without first unlocking with the transmitter, the vehicle’s turn signals will flash and the horn will sound for about 30 seconds. The alarm system will then re-arm to monitor for the next unauthorized event.
Keys, Doors and Windows Immobilizer See Radio Frequency Statement on page 12‑19 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry Canada. Immobilizer Operation This vehicle has a passive theft-deterrent system. The system does not have to be manually armed or disarmed. The vehicle is automatically immobilized when the vehicle is turned off.
1-20 Keys, Doors and Windows If the ignition modes will not change with the other transmitter, your vehicle needs service. If the ignition does change modes, the first transmitter may be faulty. See your dealer/retailer who can service the theft-deterrent system and have a new keyless entry transmitter programmed to the vehicle. It is possible for the immobilizer system to learn new or replacement keyless entry transmitters. Up to eight keyless entry transmitters can be programmed for the vehicle.
Keys, Doors and Windows 3. Adjust each outside mirror so that a little of the vehicle and the area behind it can be seen. Power Foldaway Mirrors Resetting the Power Foldaway Mirrors Reset the power foldaway mirrors if: 4. Return the selector switch to the center position. Folding Mirrors Manual Foldaway Mirrors Vehicles with manual fold mirrors are folded inward toward the vehicle to prevent damage when going through an automatic car wash. Push the mirror outward to return it to the original position.
1-22 Keys, Doors and Windows Heated Mirrors < (Rear Window Defogger): Press to heat the mirrors. See “Rear Window Defogger” under Dual Automatic Climate Control System on page 7‑1 for more information. Automatic Dimming Mirror If the vehicle has the automatic dimming mirror, the driver outside mirror automatically adjusts for the glare of headlamps behind you. This feature is controlled by the on and off setting on the inside rearview mirror. See Manual Rearview Mirror on page 1‑22 for more information.
Keys, Doors and Windows Automatic Dimming Rearview Mirror The vehicle may have an automatic dimming inside rearview mirror. Automatic dimming reduces the glare from the headlamps of the vehicle behind you. The dimming feature comes on and the indicator light illuminates each time the vehicle is started. Vehicles with OnStar have three additional control buttons located at the bottom of the mirror. See your dealer/retailer for more information on the system and how to subscribe to OnStar.
1-24 Keys, Doors and Windows Power Windows The power windows: . Can be operated with the ignition in ACC/ACCESSORY or ON/RUN/START. . Can be operated within 10 minutes of switching the ignition off. See Retained Accessory Power (RAP) on page 8‑18. . Will stop operation when any door is opened. { WARNING Leaving children in a vehicle with the keyless access transmitter is dangerous for many reasons, children or others could be badly injured or even killed.
Keys, Doors and Windows Express‐Down/Up Windows Windows that have the express‐down/up feature allow the windows to be lowered and raised fully without holding the window switch. Press the window switch fully and release it to activate the express‐down feature. Pull the window switch fully up and release it to activate the express‐up feature.The express mode can be canceled at any time by briefly pressing, or pulling the switch.
1-26 Keys, Doors and Windows Overload Window Lockout If the windows are repeatedly operated within a short time, the window operation is disabled for a short time. o (Window Lockout): The window lockout switch is located on the driver door. This feature prevents the rear passenger windows from operating, except from the driver position. Press the switch to turn the lockout feature on or off. An indicator light shows the feature is on.
Keys, Doors and Windows Press the switch to the second stop again to open the glass further, up to the full open position. If more venting is needed when the sunroof is open, adjust the sunroof to the comfort position or open one of the windows slightly. A. Sunroof Switch B. Sunshade Switch Press the back of the sunroof switch (A) to open the sunroof. When the switch is pressed to the first stop the sunroof will open to the vent position.
1-28 Keys, Doors and Windows 2 NOTES
Seats and Restraints Seats and Restraints Head Restraints Head Restraints . . . . . . . . . . . . . . . 2-2 Front Seats Seat Adjustment . . . . . . . . . . . . . . 2-4 Power Seat Adjustment . . . . . . . 2-4 Lumbar Adjustment . . . . . . . . . . . 2-6 Thigh Support Adjustment . . . . 2-6 Reclining Seatbacks . . . . . . . . . . 2-7 Heated Front Seats . . . . . . . . . . . 2-8 Heated and Ventilated Front Seats . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Rear Seats Rear Seats . . . . . . . . . . . .
2-2 Seats and Restraints Head Restraints Front Seats The vehicle's front seats have adjustable head restraints in all outboard seating positions. { WARNING With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.
Seats and Restraints 2-3 Rear Seats 3. Release the button. The rear seats have adjustable head restraints in the outboard seating positions. 4. Push down on the head restraint to make sure it is locked in place. 1. Pull the head restraint up to raise it. The center seating position has an integrated head rest that can be adjusted the same way as the head restraints. 1. To raise or lower the head restraint, press the release button while pulling up or pushing down on the head restraint. 2.
2-4 Seats and Restraints Front Seats Seat Adjustment WARNING (Continued) Power Seat Adjustment The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver's seat only when the vehicle is not moving. To adjust the seat position: 1. Pull the handle located at the front of the seat. 2. Move the seat forward or backward to adjust the seat position.
Seats and Restraints Adjust the power seat by moving the control (A) forward or rearward. The front or rear of the seat can be adjusted up or down by moving the front or rear of the control up and down. Adjust the seatback by moving the control (B) forward or rearward. Adjust the lumbar support by using the control (C). See Lumbar Adjustment on page 2‑6 for more information. Memory Seats The vehicle may have a memory seat allowing saved and recalled seat settings.
2-6 Seats and Restraints Memory Seat recall may stop if the seat is blocked. Remove the obstruction and then press the memory button again. If the memory function does not work properly, see your dealer/retailer for service. Lumbar Adjustment Power Lumbar Thigh Support Adjustment Easy Exit Seat If the easy exit seat feature is on in Vehicle Personalization, automatic adjustment occurs when the ignition is turned to OFF and the driver door is opened. The driver seat moves back.
Seats and Restraints Reclining Seatbacks Manual Reclining Seatbacks { WARNING You can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver's seat only when the vehicle is not moving. { WARNING Power Reclining Seatbacks If either seatback is not locked, it could move forward in a sudden stop or crash.
2-8 Seats and Restraints Move the switch forward or rearward to adjust the seatback. { WARNING Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like this. WARNING (Continued) For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear the safety belt properly. The shoulder belt cannot do its job because it will not be against your body.
Seats and Restraints 2-9 will heat to the highest setting if it is cold outside. See Remote Vehicle Start on page 1‑9. Heated and Ventilated Front Seats { WARNING Press the button M to heat the seat cushion and seatback. Press the button once for the highest setting. With each press of the switch, the heated seat will change to the next lower setting, and then the off setting. The lights indicate three for the highest setting and one for the lowest. The passenger seat may take longer to heat up.
2-10 Seats and Restraints Press the button once for the highest setting. With each press of the button, the seat will change to the next lower setting, and then the off setting. The lights indicate three for the highest setting and one for the lowest. The passenger seat may take longer to heat up. When Remote Keyless Entry (RKE) transmitter is used to remote start the vehicle, the front seats will come on at the highest setting if it is cold or hot outside. See Remote Vehicle Start on page 1‑9.
Seats and Restraints 3. Lift the lever located on the top of the seatback. The rear seat lock indicator (A) extends when the seatback is unlocked. 4. Fold the seatback forward. The rear seat lock indicator (A) retracts when the seatback is locked. Keep the seat in the upright locked position when not in use. 2-11 To Raise the Seatback: To Recline the Seatback: 1. Lift the lever located on top of the seatback. Raise the seatback and release the lever.
2-12 Seats and Restraints Heated Rear Seats Rear Seat Pass-Through Door { WARNING If you cannot feel temperature change or pain to the skin, the seat heater may cause burns even at low temperatures. To reduce the risk of burns, people with such a condition should use care when using the seat heater, especially for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket, cushion, cover or similar item. This may cause the seat heater to overheat.
Seats and Restraints Safety Belts This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts. { WARNING Do not let anyone ride where a safety belt cannot be worn properly. In a crash, if you or your passenger(s) are not wearing safety belts, the injuries can be much worse. You can hit things inside the vehicle harder or be ejected from the vehicle. You and your passenger(s) can be seriously injured or killed.
2-14 Seats and Restraints Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it is just a seat on wheels. Get it up to speed. Then stop the vehicle. The rider does not stop.
Seats and Restraints The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel... 2-15 or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense.
2-16 Seats and Restraints Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? A: You could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted. And you can unbuckle a safety belt, even if you are upside down.
Seats and Restraints How to Wear Safety Belts Properly This section is only for people of adult size. First, before you or your passenger(s) wear a safety belt, there is important information you should know. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a child will be riding in the vehicle, see Older Children on page 2‑43 or Infants and Young Children on page 2‑45.
2-18 Seats and Restraints Q: What is wrong with this? Q: What is wrong with this? { WARNING You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs. A: The shoulder belt is too loose. It will not give as much protection this way.
Seats and Restraints Q: What is wrong with this? { WARNING 2-19 Q: What is wrong with this? You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you. A: The belt is buckled in the wrong buckle. A: The belt is over an armrest.
2-20 Seats and Restraints { WARNING Q: What is wrong with this? You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries. Be sure the belt goes under the armrests. A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times.
Seats and Restraints Q: What is wrong with this? A: The belt is behind the body. { WARNING You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries.
2-22 Seats and Restraints Lap-Shoulder Belt 4. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. See “Shoulder Belt Height Adjustment” later in this section for instructions on use and important safety information. All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight.
Seats and Restraints 2-23 Shoulder Belt Height Adjuster The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions. To unlatch the belt, just push the button on the buckle. For outboard seating positions, slide the latch plate up the safety belt webbing when the safety belt is not in use. The latch plate should rest on the stitching on the safety belt, near the guide loop. Before a door is closed, be sure the safety belt is out of the way.
2-24 Seats and Restraints Safety Belt Pretensioners This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the safety belts during the early stages of a moderate to severe frontal and near frontal crash and will deploy in side, rear and rollover events if the threshold conditions for pretensioner activation are met. Pretensioners work only once.
Seats and Restraints 2-25 { WARNING A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. 4.
2-26 Seats and Restraints Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Seats and Restraints Safety Belt Care Keep belts clean and dry. { WARNING Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. Replacing Safety Belt System Parts After a Crash { WARNING A crash can damage the safety belt system in the vehicle.
2-28 Seats and Restraints For frontal airbags, the word AIRBAG will appear on the middle part of the steering wheel for the driver and on the instrument panel for the right front passenger. With seat-mounted side impact airbags, the word AIRBAG will appear on the side of the seatback closest to the door. With roof-rail airbags, the word AIRBAG will appear along the trim.
Seats and Restraints { WARNING { WARNING Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with airbags.
2-30 Seats and Restraints Where Are the Airbags? The driver frontal airbag is in the middle of the steering wheel. The right front passenger frontal airbag is in the instrument panel on the passenger side. Driver Side shown, Passenger Side similar The seat-mounted side impact airbags for the driver and right front passenger are in the side of the seatbacks closest to the door.
Seats and Restraints { WARNING Driver Side shown, Passenger Side similar The roof-rail airbags for the driver, right front passenger, and second row outboard passengers are in the ceiling above the side windows. If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear.
2-32 Seats and Restraints Frontal airbags may inflate at different crash speeds. For example: . If the vehicle hits a stationary object, the airbags could inflate at a different crash speed than if the vehicle hits a moving object. . If the vehicle hits an object that deforms, the airbags could inflate at a different crash speed than if the vehicle hits an object that does not deform. .
Seats and Restraints In any particular crash, no one can say whether an airbag should have inflated simply because of the damage to a vehicle or because of what the repair costs were. For frontal airbags, inflation is determined by what the vehicle hits, the angle of the impact, and how quickly the vehicle slows down. For seat-mounted side impact and roof-rail airbags, deployment is determined by the location and severity of the side impact.
2-34 Seats and Restraints Rollover capable roof-rail airbags are designed to help contain the head and chest of occupants in the outboard seating positions in the first and second rows. The rollover capable roof-rail airbags are designed to help reduce the risk of full or partial ejection in rollover events, although no system can prevent all such ejections. But airbags would not help in many types of collisions, primarily because the occupant's motion is not toward those airbags.
Seats and Restraints You can lock the doors, turn off the interior lamps and hazard warning flashers by using the controls for those features. { WARNING In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger airbag. . A crash severe enough to inflate the airbags may have also damaged important functions in the vehicle, such as the fuel system, brake and steering systems, etc.
2-36 Seats and Restraints Passenger Sensing System The vehicle has a passenger sensing system for the right front passenger position. The passenger airbag status indicator will be visible on the overhead console when the vehicle is started. United States Canada The words ON and OFF, or the symbol for on and off, are visible during the system check. If you are using remote start, if equipped, to start the vehicle from a distance, you may not see the system check.
Seats and Restraints { WARNING WARNING (Continued) A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position.
2-38 Seats and Restraints When the passenger sensing system has turned off the right front passenger frontal airbag and seat‐mounted side impact airbag, the off indicator will light and stay lit to remind you that the airbags are off. See Passenger Airbag Status Indicator on page 4‑19.
Seats and Restraints 5. If, after reinstalling the child restraint and restarting the vehicle, the on indicator is still lit, turn the vehicle off. Then slightly recline the vehicle seatback and adjust the seat cushion, if adjustable, to make sure that the vehicle seatback is not pushing the child restraint into the seat cushion. Also make sure the child restraint is not trapped under the vehicle head restraint. If this happens, adjust the head restraint. See Head Restraints on page 2‑2. 6.
2-40 Seats and Restraints Additional Factors Affecting System Operation Safety belts help keep the passenger in position on the seat during vehicle maneuvers and braking, which helps the passenger sensing system maintain the passenger airbag status. See “Safety Belts” and “Child Restraints” in the Index for additional information about the importance of proper restraint use.
Seats and Restraints Adding Equipment to the Airbag-Equipped Vehicle Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? A: Yes. If you add things that change the vehicle's frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
2-42 Seats and Restraints Q: Because I have a disability, I have to get my vehicle modified. How can I find out whether this will affect my airbag system? A: If you have questions, call Customer Assistance. The phone numbers and addresses for Customer Assistance are in Step Two of the Customer Satisfaction Procedure in this manual. See Customer Satisfaction Procedure on page 12‑1.
Seats and Restraints If an airbag inflates, you will need to replace airbag system parts. See your dealer/retailer for service. If the airbag readiness light stays on after the vehicle is started or comes on when you are driving, the airbag system may not work properly. Have the vehicle serviced right away. See Airbag Readiness Light on page 4‑18 for more information. Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle's safety belts. 2-43 that booster.
2-44 Seats and Restraints Q: What is the proper way to wear safety belts? A: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. This applies belt force to the child's pelvic bones in a crash. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash.
Seats and Restraints { WARNING { WARNING Never do this. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, the child would not be restrained by the shoulder belt. The child could move too far forward increasing the chance of head and neck injury. The child might also slide under the lap belt. The belt force would then be applied right on the abdomen.
2-46 Seats and Restraints Children who are not restrained properly can strike other people, or can be thrown out of the vehicle. WARNING (Continued) restraint in a rear seat. It is also better to secure a forward-facing child restraint in a rear seat. If you must secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go. { WARNING Never do this. Never hold an infant or a child while riding in a vehicle.
Seats and Restraints Q: What are the different types of add-on child restraints? A: Add-on child restraints, which are purchased by the vehicle's owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child's weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available.
2-48 Seats and Restraints Child Restraint Systems (B) Forward-Facing Child Seat (A) Rear‐Facing Infant Seat A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (B) provides restraint for the child's body with the harness.
Seats and Restraints Securing an Add-On Child Restraint in the Vehicle { WARNING A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle's safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual. To help reduce the chance of injury, the child restraint must be secured in the vehicle.
2-50 Seats and Restraints Where to Put the Restraint According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position.
Seats and Restraints Wherever you install a child restraint, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in your vehicle — even when no child is in it. If you need to secure more than one child restraint in the rear seat, review the following illustrations.
2-52 Seats and Restraints Lower Anchors and Tethers for Children (LATCH System) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Seats and Restraints Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached.
2-54 Seats and Restraints the instructions that come with the child restraint say that the top tether must be attached. According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint on page 2‑50 for additional information. Top Tether Anchors The top tether anchors for each rear seating position are located under the covers, on the back of the rear seatback.
Seats and Restraints { WARNING Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has been installed. Notice: Do not let the LATCH attachments rub against the vehicle’s safety belts. This may damage these parts.
2-56 Seats and Restraints 2.2. Route, attach and tighten the top tether according to your child restraint instructions and the following instructions: If the rear outboard seating position you are using has an adjustable head restraint and you are using a dual tether, route the tether around the head restraint.
Seats and Restraints Replacing LATCH System Parts After a Crash { WARNING If the rear center seating position you are using has an adjustable headrest and you are using a single tether, lower the headrest to its stowed position and route the tether over the headrest. 3. Push and pull the child restraint in different directions to be sure it is secure. A crash can damage the LATCH system in the vehicle.
2-58 Seats and Restraints In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. If the child restraint does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.
Seats and Restraints 5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. 2-59 6. If the child restraint has a top tether, follow the child restraint manufacturer's instructions regarding the use of the top tether.
2-60 Seats and Restraints A label on the sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. { WARNING A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag.
Seats and Restraints In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. You will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 2-61 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how. 1.
2-62 Seats and Restraints If the vehicle does not have a rear seat and the child restraint has a top tether, follow the child restraint manufacturer's instructions regrading the use of the top tether. See Lower Anchors and Tethers for Children (LATCH System) on page 2‑52 for more information. 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor.
Storage Storage Storage Compartments Storage Compartments Glove Box . . . . . . . . . . . . . . . . . . . . Cupholders . . . . . . . . . . . . . . . . . . . Front Storage . . . . . . . . . . . . . . . . . Armrest Storage . . . . . . . . . . . . . . Center Console Storage . . . . . . 3-1 3-1 3-2 3-2 3-2 Additional Storage Features Cargo Cover . . . . . . . . . . . . . . . . . . 3-3 Cargo Tie Downs . . . . . . . . . . . . . 3-4 Cargo Management System . . . . . . . . . . . . . . . . . . . . . .
3-2 Storage Front Storage Center Console Storage A storage area is located in front of the shift lever. Push the top of the door and the storage automatically opens. Vehicles have an armrest and an upper storage tray in the center console. Armrest Storage For vehicles with a rear seat armrest, pull the rear seat armrest forward to access cupholders with removable liners and a storage area. Pull the lever to access the storage area.
Storage 3-3 Additional Storage Features Cargo Cover For vehicles with the dual position cargo cover, it can be used to cover items in the cargo area of the vehicle. Install the cargo cover 1. Hold the cartridge so that the pull‐out shade faces the rear of the vehicle. 2. Align the cartridge over the pins on the trim panels of the vehicle. 3. Push down on the cartridge to snap it into place. 4. Unroll the shade towards the rear of the vehicle. 5. The shade can be set in two positions.
3-4 Storage Remove the cargo cover 1. Remove the cover from the channels and carefully roll it back up. 8. Insert the shades pin into the bent slot (B) and slide it to the first stop (C) to totally conceal the cargo area. The shade can also be positioned at second stop (A) to partially cover cargo. { WARNING An improperly stored cargo cover could be thrown about the vehicle during a collision or sudden maneuver. Someone could be injured.
Storage 3-5 Cargo Management System A prop rod locks to hold the cover up when opened. To open the cargo management system, press on the bottom of handle assembly to unlatch it and lift up on the handle. Four hooks are located on the inside cover and can be used or storing items. There may be additional storage compartments on each side of the cargo management system. Lift the panel up to open. Press the red push button (B) on the prop rod to close the cover.
3-6 Storage Storing the Cargo Management System Cover 1. Open the cover. Access the rear areas of the cargo management system: { WARNING An improperly latched and closed cargo cover, or cargo cover left in the open position, could be thrown about the vehicle during a collision or sudden maneuver. Someone could be injured. Be sure to return the cover to the closed position and latch before driving. If the cover is removed, always store it outside of the vehicle.
Storage D-Ring Sliders 3-7 U-Rail There are four D-Ring sliders that move along rails on both sides of the cargo management area. These can be used as tie-downs when storing cargo. Installing D-Ring Sliders The loop of the D-Ring slider must be facing inward towards the storage area and the ring must be in the up position for proper usage. To install the D-Ring slider (A), insert it into the channel (B) located in the middle of both rails.
3-8 Storage Cargo Net Storing the U-Rail Gate { WARNING Remove the gate from the U-Rail by pressing the button and lifting upward. 1. Lift the cargo management system cover. 2. Release the cover from the prop rod as described in previous steps. 3. Insert the top of the gate into the lower two clips (A). 4. Flip the bottom of the gate up and insert into the upper two clips (B). Do not stack items higher than the upper end of the cargo net or hang anything from the net.
Storage 3-9 There are four openings in the headliner, two located behind the front seats and two behind the rear seats. 3. Mount the cargo net to the rear seat tethers located on the back of the folded down rear seats and pull on the straps to tighten the net. 1. Insert the top corners of the cargo net into the large opening in the headliner and secure by sliding them into the small opening. 2.
3-10 Storage 3. Roll up the cargo net, storing it into the attached vinyl bag. 4. Open the cargo management system lid. 5. For vehicles with an inflator kit, store the cargo net in the available space next to the kit. Convenience Net 6. Pull on the straps to tighten the net. Cargo Net Storage The cargo net can be removed from the vehicle and stored in the cargo management system. 1. Disconnect the net from the roof openings and the tethers. 2.
Storage sudden starts, sharp turns, sudden braking or abrupt maneuvers, otherwise it may result in loss of control. If driving for a long distance, on rough roads, or at high speeds, occasionally stop the vehicle to make sure the cargo remains in its place. Do not exceed the maximum vehicle capacity when loading the vehicle. For more information on vehicle capacity and loading, see Vehicle Load Limits on page 8‑11. For vehicles with a roof rack, the rack can be used to load items.
3-12 Storage 2 NOTES
Instruments and Controls Instruments and Controls Instrument Panel Overview Instrument Panel Overview . . . . 4-4 Controls Steering Wheel Adjustment . . . 4-6 Steering Wheel Controls . . . . . . 4-6 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Windshield Wiper/Washer . . . . . 4-7 Rear Window Wiper/ Washer . . . . . . . . . . . . . . . . . . . . . . 4-9 Headlamp Washer . . . . . . . . . . . 4-10 Compass . . . . . . . . . . . . . . . . . . . . 4-10 Clock (Analog Clock) . . . . . . . .
4-2 Instruments and Controls Information Displays Driver Information Center (DIC) . . . . . . . . . . . . . . . 4-29 Vehicle Messages Vehicle Messages . . . . . . . . . . . Battery Voltage and Charging Messages . . . . . . . . . . . . . . . . . . Brake System Messages . . . . Compass Messages . . . . . . . . . Cruise Control Messages . . . . Door Ajar Messages . . . . . . . . . Engine Cooling System Messages . . . . . . . . . . . . . . . . . . Engine Oil Messages . . . . . . . . Engine Power Messages . .
Instruments and Controls 2 NOTES 4-3
4-4 Instruments and Controls Instrument Panel Overview
Instruments and Controls A. Air Vents on page 7‑6. C. Cruise Control on page 8‑35. J. Exterior Lamp Controls on page 5‑1. Front Fog Lamps on page 5‑5 (If Equipped). Instrument Panel Illumination Control on page 5‑6. D. Instrument Cluster on page 4‑14. K. Steering Wheel Adjustment on page 4‑6. E. Steering Wheel Controls on page 4‑6. L. Horn on page 4‑7. B. Turn and Lane-Change Signals on page 5‑5. F. AM-FM Radio on page 6‑11. G. Driver Information Center (DIC) on page 4‑29. H.
4-6 Instruments and Controls Controls Steering Wheel Adjustment A tilt and telescope wheel lets the steering wheel be adjusted. To tilt and telescope the steering wheel, pull the lever down. Then move the steering wheel up or down or backward or forward into a comfortable position. Pull the lever up to lock the steering wheel in place. Do not adjust the steering wheel while driving. Steering Wheel Controls The tilt and telescope lever is located on the left side of the steering column.
Instruments and Controls $ / c (End Call / Mute): Press to silence the vehicle speakers only. Press again to turn the sound on. For vehicles with OnStar® or Bluetooth systems, press to reject an incoming call, or end a current call. Windshield Wiper/Washer 4-7 & (Adjustable Interval Wipes): Turn the & band up for more frequent wipes or down for less frequent wipes. If the vehicle has Rainsense™, see following Rainsense™ information. SRCE: Press to select an audio source.
4-8 Instruments and Controls Wipe Parking With Rainsense, if the transmission is in N (Neutral) and the vehicle speed is very slow, the wipers will automatically stop at the base of the windshield. If the ignition is turned LOCK/OFF while the wipers are on 1, 2 or &, they will immediately stop. If the windshield wiper lever is then moved to OFF before the driver door is opened or within 10 minutes, the wipers will restart and move to the base of the windshield.
Instruments and Controls Rear Window Wiper/Washer The rear wiper controls are on the end of the windshield wiper lever. Z (Rear Wiper): For continuous rear window wipes. 5 (Rear Wiper Delay): Sets a delay between wipes. = (Rear Washer): Push the windshield wiper lever forward to spray washer fluid on the rear window. The lever automatically returns to its original position when released.
4-10 Instruments and Controls Headlamp Washer Compass For vehicles with headlamp washers, they are located to the side of the headlamps. The vehicle may have a compass display on the Driver Information Center (DIC). The compass receives its heading and other information from Global Positioning System (GPS) antenna, StabiliTrak, and vehicle speed information. The headlamps must be on in order to use the headlamp washers. If the headlamps are not on, only the windshield will be washed.
Instruments and Controls 4-11 Clock (Digital Clock) Setting the Time and Date The infotainment system controls are used to access the time and date settings through the menu system. See Operation on page 6‑7 for information about how to use the menu system. See the separate navigation system manual for instructions on how to operate the digital clock for the navigation system. 1. Press the CONFIG button. Setting the Month & Day Format 2. Select Time and Date Settings. 1. Press the CONFIG button. 3.
4-12 Instruments and Controls Power Outlets The accessory power outlets can be used to plug in electrical equipment, such as a cellular telephone. The vehicle has four accessory power outlets. The power outlets located under the climate control system, inside the center floor console, and on the rear of the center floor console are powered while the vehicle is in ON/RUN/ START or ACC/ACCESSORY mode, or until the driver door is opened within 10 minutes of turning off the vehicle.
Instruments and Controls Cigarette Lighter Ashtrays There may be a cigarette lighter located under the climate control system, inside the front storage bin. There may be an ashtray located under the climate control system on the instrument panel. Press the door to release the ashtray. To activate the cigarette lighter, push it into the heating element and let go. The lighter pops out when it is ready to be used.
4-14 Instruments and Controls Instrument Cluster United States version shown, Canada similar
Instruments and Controls Speedometer The speedometer shows the vehicle's speed in both kilometers per hour (km/h) and miles per hour (mph). Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles. This vehicle has a tamper-resistant odometer. If the vehicle needs a new odometer installed, the new one is set to the mileage of the old odometer. If this is not possible, it is set at zero and a label is put on the driver's door to show the old mileage reading.
4-16 Instruments and Controls Fuel Economy Gauge Turbo Gauge Canada US The gauge shows the fuel economy that the vehicle is currently achieving. MIN: Is the minimum fuel economy. This least efficient fuel economy usually occurs during quick accelerations or when idling. MAX: Is the maximum fuel economy. The best fuel economy usually occurs during coasting. This gauge moves often as it is an instantaneous calculation based on current driving conditions.
Instruments and Controls Engine Coolant Temperature Gauge Safety Belt Reminders Driver Safety Belt Reminder Light 4-17 Passenger Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument panel cluster. United States Canada When the engine is started this light and the chime come on and stay on for several seconds to remind the passenger to fasten their safety belt. The light also begins to flash. This gauge measures the temperature of the vehicle's engine.
4-18 Instruments and Controls The front passenger safety belt warning light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop or other electronic device.
Instruments and Controls Then, after several more seconds, the status indicator will light either ON or OFF, or either the on or off symbol to let you know the status of the right front passenger frontal and seat‐mounted side impact airbag. { WARNING If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash.
4-20 Instruments and Controls If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer/retailer for service. { WARNING If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away.
Instruments and Controls This light comes on when the ignition is on, but the engine is not running, as a check to show it is working. If it does not, have the vehicle serviced by your dealer/retailer. If the check engine light comes on and stays on, while the engine is running, this indicates that there is an OBD II problem and service is required. Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle.
4-22 Instruments and Controls Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required. An emission system malfunction might be corrected. . . Make sure the fuel cap is fully installed. See Filling the Tank on page 8‑48. The diagnostic system can determine if the fuel cap has been left off or improperly installed. A loose or missing fuel cap allows fuel to evaporate into the atmosphere.
Instruments and Controls . The vehicle will not pass this inspection if the OBD II (on-board diagnostic) system determines that critical emission control systems have not been completely diagnosed by the system. The vehicle would be considered not ready for inspection. This can happen if the battery has recently been replaced or if the battery has run down. The diagnostic system is designed to evaluate critical emission control systems during normal driving. This can take several days of routine driving.
4-24 Instruments and Controls Electric Parking Brake Light If the light does not come on, or remains flashing, see your dealer/retailer. Antilock Brake System (ABS) Warning Light For vehicles with the Electric Park Brake (EPB), this light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer/retailer. For vehicles with the Electric Park Brake (EPB), the brake warning light should come on briefly when as the engine is started.
Instruments and Controls If both ABS and brake warning lights are on, the vehicle's antilock brakes are not functioning and there is a problem with the regular brakes. See your dealer/retailer for service. See Brake System Warning Light on page 4‑23. See Brake System Messages on page 4‑34 for all brake related DIC messages. 4-25 If the Traction Control System (TCS) is off wheelspin is not limited. Adjust driving accordingly. Turn on the TCS and the StabiliTrak system and the warning light turns off.
4-26 Instruments and Controls The indicator/warning light flashes while the StabiliTrak or TCS system is working to control the vehicle on a low traction surface. If the TCS/StabiliTrak warning light comes on and stays on while driving, try to reset the system. Stop and turn off the engine for at least 15 seconds. Then start the engine again. If this light still comes on and stays on, the vehicle needs service. The vehicle is safe to drive , but StabiliTrak is not active, adjust driving accordingly.
Instruments and Controls Notice: Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty. Always follow the maintenance schedule in this manual for changing engine oil. The oil pressure light should come on briefly as the engine is started. If it does not come on have the vehicle serviced by your dealer/retailer. If the light comes on and stays on, it means that oil is not flowing through the engine properly.
4-28 Instruments and Controls Security Light This light flashes when the security system is activated. For more information, see Vehicle Security on page 1‑17. High-Beam on Light This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 5‑2 for more information.
Instruments and Controls Fog Lamp Light Cruise Control Light 4-29 Information Displays Driver Information Center (DIC) The fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Front Fog Lamps on page 5‑5 for more information. Lamps on Reminder For vehicles with the lamps on reminder light, it comes on when the lights are in use.
4-30 Instruments and Controls DIC Operation and Displays The DIC has different displays which can be accessed by using the DIC buttons located on the turn signal lever located on the left side of the steering wheel. The DIC displays trip, fuel, vehicle system information, and warning messages if a system problem is detected. The bottom of the DIC display shows what position the shift lever is in and the odometer. The direction the vehicle is driving will be shown on the top of the display.
Instruments and Controls The Average Fuel Economy can be reset by pressing SET while the Average Fuel Economy display is showing. The Instantaneous Fuel Economy display shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the fuel economy that the vehicle has right now and changes frequently as driving conditions change. Unlike average economy, this display cannot be reset.
4-32 Instruments and Controls Digital Speedometer Unit The speedometer shows how fast the vehicle is moving in either miles per hour (mph) or kilometers per hour (km/h). The speedometer cannot be reset. Move the thumbwheel up or down to switch between US or Metric when the Unit display is active. Press SET to confirm the setting. This will change the displays on the cluster and DIC to either English (US) or metric measurements. Blank Display This display shows no information.
Instruments and Controls Battery Voltage This display, available on some vehicles, shows the current battery voltage. If the voltage is in the normal range, the value will display. For example, the display may read Battery Voltage 15.0 Volts. The vehicle's charging system regulates voltage based on the state of the battery. The battery voltage can fluctuate while viewing this information on the DIC. This is normal. See Charging System Light on page 4‑20 for more information.
4-34 Instruments and Controls Service Battery Charging System This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer/retailer for service. Brake System Messages Brake Fluid Low This message is displayed when the brake fluid level is low. See Brake Fluid on page 9‑25. Brakes Overheated This message is displayed when the brakes are becoming overheated. You may see this when driving on hills. Shift to a lower gear.
Instruments and Controls Door Ajar Messages Door Open A door open symbol will be displayed on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a Door Open message will also be displayed. Close the door completely. Hood Open This message will display along with a hood open symbol when the hood is open. Close the hood completely. Power Liftgate Unavailable This message will display if the power liftgate encounters multiple obstacles on the same power cycle.
4-36 Instruments and Controls Engine Oil Messages Change Engine Oil Soon This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the Oil Life System. See Engine Oil Life System on page 9‑12 and Driver Information Center (DIC) on page 4‑29 for information on how to reset the system. See Engine Oil on page 9‑10 and Scheduled Maintenance on page 10‑2 for more information.
Instruments and Controls 4-37 Key and Lock Messages Remote Left In Vehicle Lamp Messages No Remote Detected This message displays when leaving the vehicle with the RKE transmitter still inside. AFL (Adaptive Forward Lighting) Lamps Need Service This message displays when trying to start the vehicle if the keyless access system does not detect a RKE transmitter. The transmitter battery may be weak.
4-38 Instruments and Controls XXX Turn Indicator Failure Service Park Assist When one of the turn signals is out, this message displays to show which bulb needs to be replaced. See your dealer/retailer to have the front turn signal bulbs replaced. See Turn Signal Lamps on page 9‑40 and Replacement Bulbs on page 9‑43 for more information on the rear turn signal bulb replacement. This message is displayed if there is a problem with the park assist system.
Instruments and Controls Airbag System Messages Service Vehicle Messages Service Airbag Service AC System This message is displayed if there is a problem with the airbag system. Take the vehicle to your dealer/retailer for service. This message is displayed if there is a problem with the air conditioning system. Take the vehicle to your dealer/retailer for service. Safety Belt Messages Service Power Steering Buckle Seatbelt This message displays as a reminder when the safety belt is not buckled.
4-40 Instruments and Controls Tire Learning Active This message displays when the system is learning new tires. See Tire Pressure Monitor Operation on page 9‑62 for more information. Tire Low Add Air To Tire On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle's tires is low. This message also displays “Left Front”, “Right Front”, “Left Rear”, or “Right Rear” to indicate the location of the low tire.
Instruments and Controls Vehicle Reminder Messages Vehicle Personalization Ice Possible Drive With Care The audio system controls are used to access the personalization menus for customizing vehicle features. Not all features are available on every vehicle. Only the features available on a particular vehicle will be displayed on that vehicle. This message is displayed when ice conditions are possible.
4-42 Instruments and Controls Climate and Air Quality Air Quality Sensor Remote Start Auto Heat Seats Select the Climate and Air Quality menu and the following will be displayed: This will allow you to select whether the system will operate at high or low sensitivity. Only vehicles with the dual zone climate control will have this option. When on, this feature will turn the heated seats on when using remote start on cold days. . Auto Fan Speed . Air Quality Sensor .
Instruments and Controls 4-43 Auto Rear Defog Easy Exit Driver Seat Auto Wipe in Reverse Gear This will allow you to turn the auto rear defog on or off. This allows you to turn the easy exit seat feature on or off. Press the MENU / SELECT knob when Auto Rear Defog is highlighted to open the menu. Turn the knob to highlight On or Off. Press the knob to confirm the selection and move back to the last menu. Press the MENU / SELECT knob when Easy Exit Driver Seat is highlighted.
4-44 Instruments and Controls . Vehicle Locator Lights . Unlocked Door Anti Lock Out . Exit Lighting . Auto Door Unlock Press the MENU / SELECT knob when Auto Door Unlock is highlighted. Turn the knob to select All Doors, Driver Door, or Off. Press the knob to confirm and go back to the last menu. Vehicle Locator Lights . Delayed Door Lock Delayed Door Lock This allows the vehicle locator lights to be turned on or off.
Instruments and Controls Remote Lock/Unlock/Start Locking Feedback Select Remote Lock/Unlock/Start and the following will be displayed: This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter. . Unlock Feedback (Lights) . Locking Feedback . Door Unlock Options . Passive Door Lock . Passive Door Unlock . Remote Vehicle Start Press the MENU / SELECT knob when Locking Feedback is highlighted.
4-46 Instruments and Controls Passive Door Unlock Remote Memory Recall If the vehicle has the keyless access system, this feature allows you to select which doors will automatically unlock when you open the driver’s door with the keyless access transmitter present. This allows the Remote Memory Recall feature to be turned on or off. Remote Memory Recall is when the memorized settings will be recalled when you remotely unlock the vehicle and open the driver door.
Instruments and Controls How OnStar Service Works Q : This blue button connects you to a specially trained OnStar advisor to verify your account information and to answer questions. ] : Push this red emergency button to get priority help from specially trained OnStar emergency advisors. X : Push this button for hands‐free, voice‐activated calling and to give voice commands for turn‐by‐turn navigation.
4-48 Instruments and Controls Location information about the vehicle is only available if the GPS satellite signals are unobstructed and available. The vehicle must have a working electrical system, including adequate battery power, for the OnStar equipment to operate. There are other problems OnStar cannot control that may prevent OnStar from providing OnStar service at any particular time or place.
Instruments and Controls Universal Remote System Programming Do not use the Universal Home Remote with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read the instructions completely before attempting to program the Universal Home Remote. Because of the steps involved, it may be helpful to have another person available to assist you with programming the Universal Home Remote.
4-50 Instruments and Controls To program up to three devices: 1. Hold the end of your hand-held transmitter about 3 to 8 cm (1 to 3 inches) away from the Universal Home Remote buttons while keeping the indicator light in view. The hand-held transmitter was supplied by the manufacturer of your garage door opener receiver (motor-head unit). 2. At the same time, press and hold both the hand-held transmitter button and one of the three Universal Home Remote buttons to be used to operate the garage door.
Instruments and Controls “Learn” or “Smart” Buttons 4. After Steps 1 through 3 have been completed, locate the “Learn” or “Smart” button inside the garage on the garage door opener receiver (motor-head unit). The name and color of the button may vary by manufacturer. 5. Firmly press and release the “Learn” or “Smart” button. After you press this button, you will have 30 seconds to complete Step 6. 6. Immediately return to the vehicle.
4-52 Instruments and Controls If you live in Canada, or you are having difficulty programming a gate operator or garage door opener by using the “Programming Universal Home Remote” procedures, regardless of where you live, replace Step 2 under “Programming Universal Home Remote” with the following: 2.
Lighting Lighting Exterior Lighting Exterior Lamp Controls Exterior Lighting Exterior Lamp Controls . . . . . . . . Headlamp High/Low-Beam Changer . . . . . . . . . . . . . . . . . . . . . Flash-to-Pass . . . . . . . . . . . . . . . . . Daytime Running Lamps (DRL) . . . . . . . . . . . . . . . . Automatic Headlamp System . . . . . . . . . . . . . . . . . . . . . . Adaptive Forward Lighting (AFL) . . . . . . . . . . . . . . . Twilight Sentinel . . . . . . . . . . . . . . Hazard Warning Flashers . . . . .
5-2 Lighting ; (Parking Lamps): Turns the parking lamps on together with the following: . Taillamps . License Plate Lamps . Instrument Panel Lights 2 (Headlamps): Turns the headlamps on together with the following lamps listed below. A warning chime sounds if the driver's door is opened when the ignition switch is off and the headlamps are on. . Parking Lamps . Taillamps . License Plate Lamps .
Lighting When the DRL are on, only the low‐beam headlamps, at a reduced level of brightness, will be on. The headlamps, taillamps, sidemarker, instrument panel and other lamps will not be on. The headlamps automatically change from DRL to the regular headlamps depending on the darkness of the surroundings. The other lamps that come on with the headlamps will also come on. When it is bright enough outside, the headlamps go off and the DRL come on.
5-4 Lighting City Lighting Twilight Sentinel If the vehicle speed is less than 50 km/h (31 mph), the headlamp range is automatically reduced. This feature automatically turns the lamps on and off. A light sensor on top of the instrument panel makes the Twilight Sentinel® work, so be sure it is not covered. Tourist Lighting To help prevent headlamp glare for oncoming drivers, when using left hand drive vehicles in right hand drive countries and vice versa, do the following: .
Lighting See Vehicle Personalization on page 4‑41 to select the delay time. You can also select no delay time. Turn and Lane-Change Signals If the ignition is turned off with the exterior lamp control in the parking lamp or headlamp position, the Twilight Sentinel® delay will not occur. The lamps will turn off as soon as the control is turned off. The lever returns to its starting position when it is released.
5-6 Lighting The fog lamps come on together with the parking lamps. Interior Lighting If the high‐beam headlamps are turned on, the fog lamps will turn off. If the high‐beam headlamps are turned off, the fog lamps will turn back on again. Instrument Panel Illumination Control In Scandinavian countries, the front fog lamps will turn off while the low-beam or high‐beam headlamps are in use. Some localities have laws that require the headlamps to be on along with the fog lamps.
Infotainment System Infotainment System Audio Players Introduction Introduction . . . . . . . . . . . . . . . . . . . Theft-Deterrent Feature . . . . . . . Overview (Radio with CD) . . . . . Overview (Radio with CD/DVD and MEM) . . . . . . . . . . . . . . . . . . . Operation . . . . . . . . . . . . . . . . . . . . . 6-1 6-2 6-3 6-5 6-7 Radio AM-FM Radio . . . . . . . . . . . . . . . . 6-11 Satellite Radio . . . . . . . . . . . . . . . 6-14 Radio Reception . . . . . . . . . . . . .
6-2 Infotainment System To minimize taking your eyes off the road while driving, do the following while the vehicle is parked: . Become familiar with the operation and controls of the audio system. . Set up the tone, speaker adjustments, and preset radio stations. For more information, see Defensive Driving on page 8‑3.
Infotainment System Overview (Radio with CD) A. VOL/ . 6-3 O Turns the system on or off and adjusts the volume. B. Buttons 1 to 6 . Radio: Saves and selects favorite stations. C. TUNE . Radio: Manually selects radio stations. . CD: Selects tracks. D. FAV . E. Radio: Opens the favorites list. g SEEK . Radio: Seeks the previous station. . CD: Selects the previous track or rewinds within a track.
6-4 F. G. Infotainment System l SEEK . Radio: Seeks the next station. . CD: Selects the next track or fast forwards within a track. J. . . Removes a disc from the CD slot. I. Selects the CD player when listening to a different audio source. RADIO/BAND . Changes the band while listening to the radio. . Selects the radio when listening to a different audio source. CD: Pauses the CD. Insert a CD. L. MENU/SELECT . Press: Selects menu items. .
Infotainment System Overview (Radio with CD/DVD and MEM) A. VOL/ . 6-5 O Turns the system on or off and adjusts the volume. B. Buttons 1 to 6 . Radio: Saves and selects favorite stations. . MEM: Saves and selects favorite tracks and playlists. C. TUNE/INFO . Radio: Manually selects radio stations and shows available information about the current station. . CD: Selects tracks and shows available information about the current track. .
6-6 E. g SEEK . Radio: Seeks the previous station. . CD/DVD: Selects the previous track or rewinds within a track. . F. Infotainment System . Radio: Seeks the next station. . CD/DVD: Selects the next track or fast forwards within a track. MEM: Selects the next track or fast forwards within a track. Z CD Eject . Removes a disc from the CD slot. H. RADIO/BAND MEM: Selects the previous track or rewinds within a track. l SEEK . G. I. . Changes the band while listening to the radio. .
Infotainment System M. TONE . N. Opens the tone menu. 0 BACK . Menu: Moves one level back. . Character Input: Deletes the last character. O. CONFIG . Q. . The infotainment system is operated by using the pushbuttons, multifunction knobs, menus that are shown on the display, and steering wheel controls, if equipped. Turning the System On or Off VOL/ O (Volume/Power): Press to turn the system on and off. MEM: Delete the current track from MEM.
6-8 Infotainment System 0 BACK: Press to: . Exit a menu. . Return from a submenu screen to the previous menu screen. . Delete the last character in a sequence. Selecting a Menu Option Submenus Setting a Value An arrow on the right‐hand edge of the menu indicates that it has a submenu with other options. 1. Turn the MENU/SELECT knob to change the current value of the setting. Activating a Setting 2. Press the MENU/SELECT button to confirm the setting. Turning a Function On or Off 1.
Infotainment System Entering a Character Sequence 3. Press and hold the MENU/SELECT button until the value changes to 0. 6-9 Adjusting the Fader and Balance Press the 0 BACK button to go back to the Tone Settings menu. 1. Turn the MENU/SELECT knob to highlight the character. Adjusting the Treble, Midrange, and Bass 2. Select Fader or Balance. 2. Press the MENU/SELECT button to select the character.
6-10 Infotainment System DSP (Digital Signal Processing) Settings For vehicles with DSP, it is used to provide a choice of different listening experiences. . 2.0 Normal ‐ Select this setting to adjust the audio for normal mode. This provides the best sound quality for all seating positions. . Centerpoint ‐ Centerpoint® signal processing circuitry. This setting creates a surround sound listening experience from stereo CDs and satellite radio.
Infotainment System Auto Volume Maximum Startup Volume Radio The auto volume feature automatically adjusts the radio volume to compensate for road and wind noise as the vehicle speeds up or slows down, so that the volume level is consistent. The maximum volume played when the radio is first turned on can be set. AM-FM Radio RADIO/BAND: Press to turn the radio on and choose between AM, FM, and XM™, if equipped. 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Maximum Startup Volume. 4.
6-12 Infotainment System RDS (Radio Data System) Selecting a Band The radio may have RDS. The RDS feature is available for use only on FM stations that broadcast RDS information. This feature only works when the information from the radio station is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. Press the RADIO/BAND button to choose AM, FM, or XM™, if equipped.
Infotainment System Station Lists 1. Turn the MENU/SELECT knob. 2. Select AM or FM Station List. All receivable stations in the current reception area are displayed. If a station list has not been created, an automatic station search is done. 3. Select the programming type. A list of stations that transmit programming of the selected type displays. 4. Select the station. The category lists are updated when the station lists are updated.
6-14 Infotainment System Time Shifting (Radio with CD/DVD and MEM) The radio with MEM time shift feature can rewind 20 minutes of FM/AM content. While listening to the radio, the content from the current station is always being buffered. Press the k button to pause the radio. The radio displays the time shift status bar. The status bar shows the amount of content that is stored in the buffer and the current pause point. To resume playback from the current pause point, press the k button again.
Infotainment System 6-15 Control Buttons XM Categories The buttons used to control the XM radio are: XM channels are organized in categories. RADIO/BAND: Press to turn the radio on and choose between AM, FM, and XM™, if equipped. Removing or Adding Categories . Channels in a category that have been removed can still be accessed by using the g SEEK or l SEEK buttons, or the TUNE knob. Press and release g SEEK or l SEEK to go to the previous or next channel. .
6-16 Infotainment System To select a channel using the menu: Storing a Channel as a Favorite 1. Turn the menu knob and select Channel List. To store the channel to a position in the list, press and hold the corresponding 1 to 6 button until the channel can be heard again. 2. Select the desired channel. Selecting a Channel Using the Menu System 1. Turn the menu knob. 2. Select XM Category List. 3. Select the category. 4. Select the channel.
Infotainment System Pausing XM with the Vehicle Turned Off If XM is paused when the vehicle is turned off, the radio continues to buffer the current radio station for up to 20 minutes. If the vehicle is turned back on within 20 minutes, the radio resumes playback from the paused point. XM Messages XL (Explicit Language Channels): These channels, or any others, can be blocked by request, by calling 1-800-852-XMXM (9696).
6-18 Infotainment System XM Not Available: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer/retailer. Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet.
Infotainment System Audio Players CD Player (Radio with CD) The CD player can play audio CDs and MP3 CDs. The CD player will not play 8 cm (3 in) CDs. Care of CDs Sound quality can be reduced due to disc quality, recording method, quality of the music recorded, and how the disc has been handled. Handle discs carefully and store them in their original cases or other protective cases away from direct sunlight and dust. If the bottom surface of a disc is damaged, the disc may not play properly or at all.
6-20 Infotainment System Inserting a CD Selecting a CD Track Selecting an MP3 Track With the printed side facing up, insert a disc into the CD slot until it is drawn in. Using the control buttons: Using the control buttons: . Press the g SEEK or l SEEK button to select the previous or next track. . Press the g SEEK or l SEEK button to select the previous or next track. . Turn the TUNE knob. . Turn the TUNE knob. Removing a CD Press the Z button. The disc is pushed out of the CD slot.
Infotainment System Tracks can be searched by: . Playlists . Artists . Albums . Song Titles . Genres . Folder View To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums, Song Titles, Genres, or Folder View. 4. Select the track. CD/DVD Player The CD/DVD player can play CDs, DVD‐As, MP3/WMA CDs, MP3/WMA DVDs, and DVD‐Vs. The CD/DVD player will not play 8 cm (3 in) discs.
6-22 Infotainment System Control Buttons Removing a CD or DVD The buttons used to control the CD/DVD player are: Press the MEM/DVD/AUX: Press to choose between the MEM, CD/DVD, and AUX. l SEEK/ g SEEK : Press to select tracks or to fast forward or rewind within a track. Z button. 2. Select Tracks List. If the disc is not removed after it is ejected, it is pulled back in after a few seconds.
Infotainment System Playing an MP3 CD or DVD Files that are not stored in folders are displayed in the root directory (disc). The search rate increases if the MENU/SELECT knob is continuously turned while searching in a list. Selecting an MP3 Track Using the control buttons: . . Press g SEEK or l SEEK to select the previous or next track. Turn the TUNE knob. Using the CD or DVD Menu: 1. Turn the MENU/SELECT knob. 2. Select Folder List. 3. Select the folder. 4. Select the track.
6-24 Infotainment System Playing a DVD‐V See Rear Seat Entertainment (RSE) System on page 6‑36 for information about how to control a Video DVD using the wireless remote control. Changing the Audio Stream . Cursor RIGHT 1. Turn the MENU/SELECT knob. . Cursor LEFT 2. Select Audio Stream. . Up Menu 3. Select Change Audio Stream. Use the following actions to navigate the menu on a DVD‐V Disc while playing chapters. Selecting a Chapter 4. Press MENU/SELECT to change the selection.
Infotainment System Mass Storage Media (MEM) Infotainment systems with MEM storage are able to record up to 1.1 GB (gigabyte) of music from Audio CDs, MP3/WMA/AAC discs, and USB storage devices. The MEM player can also time shift audio from AM, FM, and XM™ radio. Music or content that is stored in MEM that you did not create, or have the right to distribute, must be deleted before the sale or end of the lease of the vehicle.
6-26 Infotainment System Stopping the Recording Press the O REC button while recording from an audio CD to display the stop recording option. Select “Stop Recording Song to MEM”. Renaming Recorded Discs Discs that have been recorded to MEM can be renamed. Recording From MP3/WMA Discs or USB Storage Devices USB Host Support The USB connector uses the USB standards, 1.1 and 2.0. USB Supported Devices . USB Flash Drives . Portable USB Hard Drives 1. Turn the MENU/SELECT knob. Recording to MEM 2.
Infotainment System Playing From MEM Playing Back a Previously Recorded CD Turn the TUNE knob to select a track if MEM is already playing from the previously recorded disc. 1. Select Recorded Disc List. 2. Select the disc. 3. Select the track. Searching For a Track Tracks can be searched for by: The number of objects in each category is shown in parentheses after the category. To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3.
6-28 Infotainment System Saving MEM Tracks as Favorites Favorites can be saved by pressing and holding one of the 1 to 6 buttons. Favorites can be stored according to the following list: Playlist: Adds currently playing track to the playlist selected. Artist: Saves the artist associated with the currently playing track in the indicated favorites position. Album: Saves the album associated with the currently playing track in the indicated favorites position.
Infotainment System 3.5 mm Auxiliary Input Jack Connect a 3.5 mm (1/8 in) cable to the 3.5 mm auxiliary input jack to use a portable audio player. Playback of an audio device that is connected to the 3.5 mm auxiliary input jack can only be controlled using the controls on the device. Adjusting the Volume Turn the VOL/ O knob to adjust the volume of the infotainment system after the volume level has been set on the portable audio device.
6-30 Infotainment System On: Repeats the current track. To search for tracks: Off: Playback starts from the beginning of the current track after the last track finishes. 1. Turn the MENU/SELECT knob. Connecting and Controlling a PlaysForSure Device (PFD) or Zune™ 2. Select Search. 3. Select: Playlists, Artists, Albums, Song Titles, Podcasts, or Genres. 4. Select the track. Connecting a PFD or Zune Shuffle Functionality Connect the PFD or Zune to the USB port.
Infotainment System Tracks can be searched for by: . Playlists* . Artists . Albums . Song Titles . Genres . Folder View *This only displays if a playlist is found on the device. To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums, Song Titles, Genres, or Folder View. 4. Select the track. Shuffle Functionality Turn the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order.
6-32 Infotainment System Pairing Information: . Up to five devices can be paired to the system. . The pairing process is disabled when the vehicle is moving. . . . The infotainment system automatically links with the first available paired device in the order the device was paired. Only one paired device can be connected to the infotainment system at a time. Pairing should only need to be completed once, unless changes to the pairing information have been made or the device is deleted.
Infotainment System 4. Some devices may require a PIN number in order to complete the pairing process. Locate the device named “GMusicConnect” in the list on the Bluetooth device and follow the instructions on the device to enter the four digit PIN number provided by the infotainment system. Connecting to a Device Once a device is paired to the infotainment system, it can be connected to the infotainment system. To connect a paired device when no other device is connected to the infotainment system: 1.
6-34 Infotainment System Controlling a Bluetooth® Device Auxiliary Devices (Radio with CD/DVD and MEM) Bluetooth devices that support AVRCP (Audio/Video Remote Control Profile) version 1.0 may be able to be controlled by the infotainment system. The optional AUX input allows portable devices to be connected using the 3.5 mm (1/8 in) input jack or the USB port. Press and release g SEEK / l SEEK to skip tracks. Portable devices are controlled by using the menu system described in Operation on page 6‑7.
Infotainment System 6-35 Connecting and Controlling an iPod™ Searching For a Track Not all iPod's can be controlled by the infotainment system. . Playlists . Artists Connecting an iPod . Albums Connect the iPod to the USB port. . Song Titles Selecting a Track . Genres Connect the USB drive to the USB port. Using the control buttons: . Composers Disconnecting a USB Drive . Audiobooks A USB drive should be ejected from the USB port before disconnecting it. To eject a USB drive: . .
6-36 Infotainment System Selecting a Track Tracks can be searched by: Using the control buttons: . Playlists Press g SEEK or l SEEK to select the previous or next track. . Artists . Albums Turn the TUNE knob to select a track in the current sub menu. The track will start to play. . Song Titles . Genres . . Selecting a track in a different folder: 1. Turn the MENU/SELECT knob. 2. Select Folder List. 3. Select the folder. 4. Select the track.
Infotainment System In severe or extreme weather conditions the RSE system may not work until the temperature is within the operating range. The operating range is above −20°C (−4°F) and below 60°C (140°F). If the temperature is outside of this range, heat or cool the vehicle until it is within the operating range. A padlock icon may display on the infotainment screen when the Global Off feature is on.
6-38 Infotainment System Infrared transmitters are on the top of the left seatback video screen. The headphones shut off automatically to save the battery power if the RSE system and RSA are shut off or if the headphones are out of range of the transmitters for more than three minutes. Moving too far forward or stepping out of the vehicle, can cause the headphones to lose the signal or have static. The headphones may automatically turn off after four hours of continuous use.
Infotainment System Changing the Source on the Video Display Screens How to Change the RSE Video Screen Settings The image from the auxiliary device can be switched between the video display screens. The screen display mode, brightness, and language can be changed from the setup menu using the remote control. To change a setting: To change the display: 1. Press the AUX button on the remote control to change the source of both video screens from the DVD player to the auxiliary device. 2.
6-40 Infotainment System Video Screens The video screens are located in the back of the driver and front passenger seats. To use the video screen: 1. Push the release button located on the seatback console. 2. Move the screen to the desired viewing position. Push the video screen down into its locked position when it is not in use. The screen turns off automatically.
Infotainment System If a CD, DVD, or MP3 disc is in the Radio DVD slot, the remote control O button can be used to turn on the video screen display and start the disc. The infotainment system can also turn on the video screen display. See CD/DVD Player on page 6‑21 or the separate navigation system manual for more information. Notice: Storing the remote control in a hot area or in direct sunlight can damage it, and the repairs will not be covered by the warranty.
6-42 Infotainment System Depending on the infotainment system in the vehicle, DVD playback may be slowed down by pressing s then [. Reverse slow play by pressing s then r. Press s again to cancel slow play. t (Previous Track/Chapter): Press to go to the start of the current track or chapter. Press again to go to the previous track or chapter. This button may not work when the DVD is playing the copyright information or the previews.
Infotainment System Replacing the Remote Control If the remote control becomes lost or damaged, a new universal remote control can be purchased. Use a Toshiba® code set for replacement universal remote controls. Battery Replacement To change the remote control batteries: 1. Slide back the rear cover on the remote control. Tips and Troubleshooting Chart Problem Recommended Action No power. The ignition might not be turned ON/RUN or in ACC/ACCESSORY. The picture does not fill the screen.
6-44 Infotainment System Tips and Troubleshooting Chart (cont'd) DVD Display Error Messages Problem The DVD display error message depends on which radio the vehicle has. The video screen may display one of the following: The auxiliary source is running but there is no picture or sound. Sometimes the wireless headphone audio cuts out or buzzes. Recommended Action Check that the RSE video screen is in the auxiliary source mode by pressing the AUX button on the remote control.
Infotainment System DVD Distortion Video distortion can occur when operating cellular phones, scanners, CB radios, Global Position Systems (GPS)*, two-way radios, mobile fax, or walkie talkies. It might be necessary to turn off the DVD player when operating one of these devices in or near the vehicle. *Excludes the OnStar® System. Cleaning the RSE Seatback Console Use only a clean cloth dampened with clean water to clean the RSE seatback console surface.
6-46 Infotainment System passengers are listening to the radio, this function may be inactive on some radios. P (Power): Press to turn the RSA on or off. Volume: Turn to increase or decrease the volume of the wired headphones. The left knob controls the left headphones and the right knob controls the right. Use the volume control on headphones for wireless headphones. SRCE (Source): Press to select between the radio, CD, and if these features are available: DVD, front or rear auxiliary, HDD, USB.
Infotainment System When a CD or DVD audio disc is playing, press PROG to go to the beginning of the disc or display disc info. If the front seat passengers are listening to a disc, this function may be inactive on some radios. When a disc is playing in the CD or DVD changer, press and hold PROG to select the next disc, if multiple discs are loaded. If the front seat passengers are listening to a disc, this function may be inactive on some radios. The PROG button may be used to access the menu of an MP3.
6-48 Infotainment System Voice Recognition The voice recognition system uses commands to control the system and dial phone numbers. Noise: The system may not recognize voice commands if there is too much background noise. When to Speak: A tone sounds to indicate that the system is ready for a voice command. Wait for the tone and then speak. How to Speak: Speak clearly in a calm and natural voice.
Infotainment System . Only one paired cell phone can be connected to the Bluetooth system at a time. . Pairing should only need to be completed once, unless changes to the pairing information have been made or the phone is deleted. To link to a different paired phone, see “Linking to a Different Phone” later in this section. Pairing a Phone 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Pair Device (Phone). A four digit PIN number appears on the display.
6-50 Infotainment System Linking to a Different Phone Making a Call Accepting or Declining a Call In order to link to a different phone, the new phone must be in the vehicle and available to be connected to the bluetooth system before the process is started. Radio with CD When an incoming call is received, the infotainment system mutes and a ring tone is heard in the vehicle. 1. Press the PHONE button twice. 2. Enter the character sequence.
Infotainment System Accepting a Call Turn the MENU/SELECT knob to “Answer” and press the MENU/SELECT knob to accept the call. Declining a Call Turn the MENU/SELECT knob to “Decline” and press the MENU/SELECT knob to decline the call. Switching Between Calls (Call Waiting Calls Only) To switch between calls: 1. Turn or press the MENU/SELECT knob. 2. Select Switch Call from the menu.
6-52 Infotainment System Bluetooth (Voice Recognition) Pairing A Bluetooth cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See the cell phone manufacturers user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar® Hands‐Free Calling, if available. Refer to the OnStar Owner's Guide for more information.
Infotainment System 4. Start the Pairing process on the cell phone that will be paired to the vehicle. Reference the cell phone manufacturers user guide for information on this process. Locate the device named “General Motors” in the list on the cell phone and follow the instructions on the cell phone to enter the four‐digit PIN number that was provided in Step 3. 5. The system prompts for a name for the phone. This name will be used to indicate which phone is connected. The system confirms the name. 6.
6-54 Infotainment System 4. Say the name of the phone to be deleted. If the phone name is unknown, use the “List” command for a list of all paired phones. The system responds “Would you like to delete ? Yes or No” followed by a tone. 2. Say “Bluetooth”. The system responds “Bluetooth ready” followed by a tone. 3. Say “Change phone”. The system responds “Please wait while I search for other phones”. 5. Say “Yes” to delete the phone. The system responds “OK, deleting ”.
Infotainment System 3. Say the complete phone number to be stored at once with no pauses. . If the system recognizes the number the response is “OK, Storing”. . If the system does not recognize the phone number, the response is “Store ”. “Please say yes or no”. If the number is correct, say “Yes”. If the number is not correct, say “No”. The system will ask for the number again. 4. After the system stores the phone number, it responds “Please say the name tag” followed by a tone. 5.
6-56 Infotainment System 4. After the complete number has been entered, say “Store”. The system responds “Please say the name tag” followed by a tone. Using the Directory Command Deleting Name Tags The directory command lists all of the name tags stored by the system. To use the directory command: The system uses the following commands to delete name tags: 5. Say a name tag for the phone number. The name tag is recorded and the system responds “About to store . Does that sound OK?”. 1.
Infotainment System 2. Say “Delete”. The system responds “Delete, please say the name tag” followed by a tone. 3. Say the name tag to be deleted. The system responds “Would you like to delete, ? Please say yes or no”. . . If the name tag is correct, say “Yes” to delete the name tag. The system responds with “OK, deleting , returning to the main menu.” If the name tag is incorrect, say “No”. The system responds with “No. OK, let's try again, please say the name tag.
6-58 Infotainment System Using the Dial Command 1. Press b / g. . For vehicles without a navigation system, the system responds “Ready” followed by a tone. . For vehicles with a navigation system, the system responds with a tone. After the tone say “Hands Free”. The system responds “Ready” followed by a tone. 2. Say “Dial”. The system responds “Dial using . “Number please” followed by a tone. 3. Say the entire number without pausing. . .
Infotainment System 4. Continue entering digits until the number to be dialed is complete. After the whole number has been entered, say “Dial”. The system responds “OK, Dialing” and dials the number. . . If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. Using the Call Command 1. Press . . b / g.
6-60 Infotainment System Receiving a Call Three‐Way Calling Muting a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. Three‐Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier. During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. 1. While on a call press b g. The system responds with “Ready” followed by a tone.
Infotainment System Transferring a Call Audio can be transferred between the in‐vehicle Bluetooth system and the cell phone. To Transfer Audio to the Cell Phone During a call with the audio in the vehicle: 1. Press b g. The system responds “Ready” followed by a tone. 2. Say “Transfer Call.” The system responds “Transferring call” and the audio transfers to the cell phone.
6-62 Infotainment System Dual Tone Multi-Frequency (DTMF) Tones . The in‐vehicle Bluetooth system can send numbers and the numbers stored as name tags during a call. Use this feature when calling a menu driven phone system. Account numbers can also be stored for use. Sending a Number During a Call 1. Press b g. The system responds “Ready” followed by a tone. 2. Say “Dial”. The system responds “Say a number to send tones” followed by a tone. 3. Say the number to send. .
Infotainment System Bluetooth (Navigation) For information about how to navigate the menu system using the infotainment controls, see “Overview” under Introduction, in the Navigation supplement. Bluetooth Pairing To make calls with a Bluetooth cell phone through your vehicle, it must be paired to the vehicle's Bluetooth system first and then connected to the vehicle before it can be used. Refer to the cell phone manufacturer's user guide for Bluetooth pairing instructions.
6-64 Infotainment System The additional GPS location feature provides the vehicle's GPS location through the Bluetooth Serial Port Profile is not available. 3. Select “Add New Phone”, the pairing process will begin searching for Bluetooth devices on your cellular phone. See the cell phone manufacturer's user guide for information on this process.
Infotainment System 6-65 Listing All Paired and Connected Phones 1. Press the CONFIG hard key repeatedly until the Phone menu is shown or touch the Phone tab displayed on the screen. 3. Select the Device List submenu. 2. Select the Bluetooth submenu. A list of all previously paired phones will be displayed. If there is a currently connected phone, a check mark will appear on the right side of the Phone name.
6-66 Infotainment System Deleting a Paired Phone 1. Press the CONFIG hard key repeatedly until the Phone menu is shown or touch the Phone tab on the screen. 3. Select the Device List submenu. 2. Select the Bluetooth submenu. 4. Select the phone to be deleted and then follow the on screen prompts to delete the device from the system.
Infotainment System 6-67 Linking to a Different Phone In order to link to a different phone, the new phone must be in the vehicle and available to be connected to the bluetooth system before the process is started. 1. Press the CONFIG hard key repeatedly until the Phone menu is shown or touch the Phone tab on the screen. 5. Once a phone has been deleted, the only way to connect back to that phone is to pair the phone again. See “Bluetooth Pairing” earlier before the process is started. 3.
6-68 Infotainment System Making a Call Press 5 located on the faceplate of the infotainment system, to access the phone menu. 4. Select the phone to be linked and then follow the on screen prompts. 5. The Phone menu will be displayed with the name of the phone linked. Enter Number Use this option to enter a phone number and make a call. To do this: 1. Press the Enter Number selection. A dial pad displays on the Navigation screen.
Infotainment System 6-69 Accepting a Call Call Waiting Press b g on the steering wheel control to answer the incoming call or touch the Answer option to answer the call. Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. Switching Calls (Only Available with Call Waiting) This feature allows you to switch between calls, making one call active and placing the other on hold. 2.
6-70 Infotainment System Conference Calling Ending a Call Conference and three-way calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. To start a conference while in a current call: 1. Press 5 on the faceplate until the Phone main screen is shown with the current active call. 3. Make another call. The first call will be placed on hold while the second call is dialing and connected. 4.
Infotainment System Dual Tone Multi-Frequency (DTMF) Tones The in-vehicle Bluetooth system can send numbers during a call, this is used when calling a menu driven phone system. 2. Select “Enter Number” option and enter the number sequence. The DTMF Tones will be generated on the network as you enter each number 1. Press the 5 hard key.
6-72 Infotainment System 2 NOTES
Climate Controls Climate Controls 7-1 Climate Control Systems Dual Automatic Climate Control System Climate Control Systems Dual Automatic Climate Control System . . . . . . . . . . . . . . . . . . . . . . 7-1 Rear Climate Control System . . . . . . . . . . . . . . . . . . . . . . 7-5 The heating, cooling, and ventilation for the vehicle can be controlled with this system. Air Vents Air Vents . . . . . . . . . . . . . . . . . . . . . . 7-6 A. Fan Control F. Air Delivery Mode Control B. Power G.
7-2 Climate Controls J. Recirculation K. Outside Air L. Rear Window Defogger Automatic Operation The system automatically controls the fan speed, air delivery, air conditioning and recirculation in order to heat or cool the vehicle to the desired temperature. When the indicator light is on, the system is in full automatic operation. If the air delivery mode or fan setting is manually adjusted, the auto indicator turns off and displays will show the selected settings.
Climate Controls - (Defog): Clears the windows of fog or moisture. Air is directed to the windshield and floor outlets. 8 (Upper): Air is directed to the windshield outlets. 7 (Hi-Level): Air is divided between the windshield and instrument panel outlets. 0 (Defrost): Clears the windshield of fog or frost more quickly. Air is directed to the windshield. # (Air Conditioning): Press to turn the automatic air conditioning on or off.
7-4 Climate Controls Rear Window Defogger = (Rear Window Defogger): Press to turn the rear window defogger on or off. The rear window defogger turns off automatically after about 10 minutes. If turned on again it runs for about 5 minutes before turning off. At higher speeds, the rear window defogger may stay on continuously. The rear window defogger can be set to automatic operation, see Climate and Air Quality under Vehicle Personalization on page 4‑41.
Climate Controls Rear Climate Control System For vehicles with the rear heat and air conditioning controls, they are integrated with the rear seat audio controls located in the center console. 7-5 The rear climate control can be turned off by pressing the C button. Independent Mode: This mode directs rear seating airflow according to the settings of the rear controls. The front climate control system must be on for the rear climate control to work.
7-6 Climate Controls Automatic Operation AUTO: Press N until the AUTO setting is selected to control the rear temperature, air delivery, and fan speed automatically. Air Vents Manual Operation Move the sliding knob on the air outlets up and down or left and right to direct the airflow. Use the thumbwheels near the air outlets to open or close off the airflow. D C (Fan Control): Operation Tips Press these buttons on the rear seat audio control panel to increase or decrease the airflow.
Driving and Operating Driving and Operating Driving Information Driving for Better Fuel Economy . . . . . . . . . . . . . . . . . . . . 8-2 Defensive Driving . . . . . . . . . . . . . 8-3 Drunk Driving . . . . . . . . . . . . . . . . . 8-3 Control of a Vehicle . . . . . . . . . . . 8-4 Braking . . . . . . . . . . . . . . . . . . . . . . . 8-4 Steering . . . . . . . . . . . . . . . . . . . . . . . 8-5 Off-Road Recovery . . . . . . . . . . . . 8-6 Loss of Control . . . . . . . . . . . . . . . .
8-2 Driving and Operating Towing General Towing Information . . . . . . . . . . . . . . . . . Driving Characteristics and Towing Tips . . . . . . . . . . . . . . . . Trailer Towing . . . . . . . . . . . . . . . . Towing Equipment . . . . . . . . . . . Trailer Sway Control (TSC) . . . . . . . . . . . . . . Driving Information 8-50 8-50 8-54 8-58 8-59 Conversions and Add-Ons Add-On Electrical Equipment . . . . . . . . . . . . . . . . .
Driving and Operating Defensive Driving Defensive driving means “always expect the unexpected.” The first step in driving defensively is to wear your safety belt, see Safety Belts on page 2‑13. { WARNING Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what they might do and be ready. In addition: . . Allow enough following distance between you and the driver in front of you. Focus on the task of driving.
8-4 Driving and Operating This means that when anyone who has been drinking — driver or passenger — is in a crash, that person's chance of being killed or permanently disabled is higher than if the person had not been drinking. Control of a Vehicle The following three systems help to control the vehicle while driving — brakes, steering, and accelerator. At times, as when driving on snow or ice, it is easy to ask more of those control systems than the tires and road can provide.
Driving and Operating applied. Once the power assist is used up, it can take longer to stop and the brake pedal will be harder to push. Adding non‐dealer/non‐retailer accessories can affect vehicle performance. See Accessories and Modifications on page 9‑3. Steering Power Steering If power steering assist is lost because the engine stops or the power steering system is not functioning, the vehicle can be steered but it will take more effort.
8-6 Driving and Operating The fact that such emergency situations are always possible is a good reason to practice defensive driving at all times and wear safety belts properly. Off-Road Recovery The vehicle's right wheels can drop off the edge of a road onto the shoulder while driving. is nothing in the way, steer so that the vehicle straddles the edge of the pavement. Turn the steering wheel 8 to 13 cm (3 to 5 inches), about one-eighth turn, until the right front tire contacts the pavement edge.
Driving and Operating Of course, traction is reduced when water, snow, ice, gravel, or other material is on the road. For safety, slow down and adjust your driving to these conditions. It is important to slow down on slippery surfaces because stopping distance is longer and vehicle control more limited. While driving on a surface with reduced traction, try your best to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear.
8-8 Driving and Operating Other Rainy Weather Tips Highway Hypnosis Hill and Mountain Roads Besides slowing down, other wet weather driving tips include: Always be alert and pay attention to your surroundings while driving. If you become tired or sleepy, find a safe place to park your vehicle and rest. Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: . Allow extra following distance. .
Driving and Operating { WARNING Coasting downhill in N (Neutral) or with the ignition off is dangerous. The brakes will have to do all the work of slowing down and they could get so hot that they would not work well. You would then have poor braking or even none going down a hill. You could crash. Always have the engine running and the vehicle in gear when going downhill. . Stay in your own lane. Do not swing wide or cut across the center of the road. Drive at speeds that let you stay in your own lane. .
8-10 Driving and Operating Blizzard Conditions Being stuck in snow can be a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the Roadside Service on page 12‑8. To get help and keep everyone in the vehicle safe: . Turn on the hazard warning flashers. . Tie a red cloth to an outside mirror. WARNING (Continued) If the vehicle is stuck in the snow: . . Check again from time to time to be sure snow does not collect there. .
Driving and Operating Repeat this until help arrives but only when you feel really uncomfortable from the cold. Moving about to keep warm also helps. If it takes some time for help to arrive, now and then when you run the engine, push the accelerator pedal slightly so the engine runs faster than the idle speed. This keeps the battery charged to restart the vehicle and to signal for help with the headlamps. Do this as little as possible to save fuel.
8-12 Driving and Operating Two labels on the vehicle show how much weight it may properly carry, the Tire and Loading Information label and the Certification label. Tire and Loading Information Label The Tire and Loading Information label also shows the tire size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 9‑52 and Tire Pressure on page 9‑59.
Driving and Operating Steps for Determining Correct Load Limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity.
8-14 Driving and Operating seating positions. The combined weight of the driver, passengers, and cargo should never exceed the vehicle's capacity weight. Certification Label Example 2 A. Vehicle Capacity Weight for Example 2 = 453 kg (1,000 lbs). B. Subtract Occupant Weight @ 68 kg (150 lbs) × 5 = 340 kg (750 lbs). C. Available Cargo Weight = 113 kg (250 lbs). Example 3 A. Vehicle Capacity Weight for Example 3 = 453 kg (1,000 lbs). B.
Driving and Operating The GVWR includes the weight of the vehicle, all occupants, fuel, and cargo. Never exceed the GVWR for the vehicle, or the Gross Axle Weight Rating (GAWR) for either the front or rear axle. If the vehicle is carrying a heavy load, it should be spread out. See “Steps for Determining Correct Load Limit” earlier in this section. { WARNING Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR).
8-16 Driving and Operating can be used. Vehicle speeds above 110 km/h (68 mph) should be limited to five minutes per use. Starting and Operating New Vehicle Break-In . Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: . Do not drive at any one constant speed, fast or slow, for the first 805 km (500 miles). Do not make full-throttle starts. Avoid downshifting to brake or slow the vehicle. .
Driving and Operating Ignition Positions To shift out of P (Park), the vehicle must be in ACC/ACCESSORY or ON/RUN mode and the brake pedal must be applied. OFF: When this button is pressed with the engine running, the engine will be turned off. If the vehicle is in P (Park), the ignition will turn OFF, and Retained Accessory Power (RAP) will remain active. See Retained Accessory Power (RAP) on page 8‑18 for more information. The vehicle has an electronic keyless ignition with push‐button start.
8-18 Driving and Operating To place the ignition in ON/RUN/ START from OFF without starting the engine, press the button two times without your foot on the brake pedal. Power to the audio system will continue to operate for up to 10 minutes or until the driver door is opened. The battery could be drained if you leave the ignition in the ON/RUN/ START position with the engine off. You may not be able to start the vehicle if the battery is allowed to drain for an extended period of time.
Driving and Operating If the transmitter is not in the vehicle or something is interfering with the transmitter, the Driver Information Center (DIC) will display No Remote Detected. See Driver Information Center (DIC) on page 4‑29 for more information. If the battery in the keyless access transmitter needs replacing, the DIC displays Replace Battery In Remote Key. The vehicle can still be driven. See Remote Keyless Entry (RKE) System Operation on page 1‑3 for more information. 3.
8-20 Driving and Operating Engine Heater The engine coolant heater, if available, can help in cold weather conditions at or below −18°C (0°F) for easier starting and better fuel economy during engine warm-up. Plug in the coolant heater at least four hours before starting the vehicle. An internal thermostat in the plug-end of the cord will prevent engine coolant heater operation at temperatures above −18°C (0°F). To Use The Engine Coolant Heater 1. Turn off the engine. 2.
Driving and Operating Leaving the Vehicle With the Engine Running { WARNING It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire. You or others could be injured. Do not leave the vehicle with the engine running.
8-22 Driving and Operating If you still are unable to shift out of P (Park): Engine Exhaust { WARNING 1. Fully release the shift lever button. 2. Hold the brake pedal down and press the shift lever button again. 3. Move the shift lever to the desired position. If you still cannot move the shift lever from P (Park), consult your dealer/retailer or a professional towing service. Parking Over Things That Burn { WARNING Things that can burn could touch hot exhaust parts under the vehicle and ignite.
Driving and Operating Running the Vehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. { WARNING Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has no fresh air ventilation.
8-24 Driving and Operating P (Park): This position locks the front wheels. It is the best position to use when you start the engine because the vehicle cannot move easily. { WARNING It is dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. Do not leave the vehicle when the engine is running unless you have to. If you have left the engine running, the vehicle can move suddenly. You or others could be injured.
Driving and Operating N (Neutral): In this position, the engine does not connect with the wheels. To restart when the vehicle is already moving, use N (Neutral) only. You can also use N (Neutral) when the vehicle is being towed. { WARNING Shifting into a drive gear while the engine is running at high speed is dangerous. Unless your foot is firmly on the brake pedal, the vehicle could move very rapidly. You could lose control and hit people or objects.
8-26 Driving and Operating Manual Mode Driver Shift Control (DSC) An S will be displayed in the DIC. Driver Shift Control (DSC) allows you to shift an automatic transmission similar to a manual transmission. To use the DSC feature: Within Sport Mode there is a further performance feature called Performance Mode Lift Foot (PMLF) Mode. The feature is activated automatically when sports oriented driving is detected, based on cornering and on/off throttle application.
Driving and Operating The transmission will only allow you to shift into gears appropriate for the vehicle speed and engine Revolutions Per Minute (RPM). The transmission will not automatically shift to the next lower gear if the engine RPM is too high, nor to the next higher gear when the maximum engine RPM is reached. Fuel Economy Mode The vehicle may have a fuel economy mode. When engaged, fuel economy mode can improve the vehicle's fuel economy.
8-28 Driving and Operating Drive Systems Brakes All-Wheel Drive Antilock Brake System (ABS) With this feature, engine power is always sent to all four wheels. It is fully automatic, and adjusts itself as needed for road conditions. When using a compact spare tire on an AWD vehicle, the system automatically detects the compact spare and disables AWD. To restore AWD operation and prevent excessive wear on system, replace the compact spare with a full-size tire as soon as possible.
Driving and Operating Remember: ABS does not change the time needed to get a foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, there will not be enough time to apply the brakes if that vehicle suddenly slows or stops. Always leave enough room up ahead to stop, even with ABS. Parking Brake Using ABS Do not pump the brakes. Just hold the brake pedal down firmly and let ABS work.
8-30 Driving and Operating EPB Apply The EPB can be applied any time the vehicle is stopped. The EPB is applied by momentarily lifting up on the EPB switch. Once fully applied, the park brake status light will be on. While the brake is being applied, the status lamp will flash until full apply is reached. If the light does not come on, or remains flashing, you need to have the vehicle serviced. Do not drive the vehicle if the park brake status light is flashing. See your dealer/retailer.
Driving and Operating EPB release may take a longer period of time than normal when this light is on. Continue to hold the switch until the park brake status light is off. If the light is on, see your dealer/retailer. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving.
8-32 Driving and Operating Ride Control Systems Traction Control System (TCS) The vehicle may have a Traction Control System (TCS) that limits wheel spin. On a front-wheel-drive vehicle, the system operates if it senses that one or both of the front wheels are spinning or beginning to lose traction. On an All-Wheel-Drive (AWD) vehicle, the system will operate if it senses that any of the wheels are spinning or beginning to lose traction.
Driving and Operating Notice: Do not repeatedly brake or accelerate heavily when TCS is off. The vehicle's driveline could be damaged. Driving should be adjusted accordingly. Press and release d again to turn the system back on. When TCS is turned off on AWD vehicles, the system may still make noise. This is normal and necessary with AWD hardware. TCS/StabiliTrak Button d is located on the console. TCS Off Light TCS can be turned off by pressing and releasing d .
8-34 Driving and Operating When this message is displayed and d comes on and stays on, the vehicle is safe to drive but the system is not operational. Driving should be adjusted accordingly. TCS/StabiliTrak Light When the stability control system activates, d flashes on the instrument panel. This also occurs when traction control is activated. A noise may be heard or vibration may be felt in the brake pedal. This is normal. Continue to steer the vehicle in the intended direction.
Driving and Operating Limited-Slip Rear Axle Vehicles with a limited-slip rear axle can give more traction on snow, mud, ice, sand or gravel. When traction is low, this feature allows the drive wheel with the most traction to move the vehicle. Selective Ride Control The vehicle may have a ride control system called Selective Ride Control. The setting can be changed at any time.
8-36 Driving and Operating If the vehicle has the StabiliTrak® system and begins to limit wheel spin while using cruise control, the cruise control automatically disengages. See StabiliTrak System on page 8‑33 or Traction Control System (TCS) on page 8‑32. When road conditions allow the cruise control to be safely used, you can apply the cruise control again. T (On/Off): Press to turn the system on and off.
Driving and Operating Resuming a Set Speed If the brakes or cruise cancel button are applied while the cruise control is at a set speed, the cruise control disengages. But it does not need to be reset. If the vehicle has a previously stored set speed, and is traveling about 40 km/h (25 mph) or more, press the +RES button once on the steering wheel, and the vehicle returns to the previously selected speed and stays there.
8-38 Driving and Operating Object Detection Systems Ultrasonic Parking Assist For vehicles with the Ultrasonic Front and Rear Parking Assist (UFRPA) system, it assists the driver with parking and avoiding objects. UFRPA operates at speeds less than 8 km/h (5 mph), and the sensors on the front and rear bumper detect objects up to 1.2 m (4 ft) in front of the vehicle and 2.5 m (8 ft) behind the vehicle, and at least 25.4 cm (10 in) off the ground.
Driving and Operating High-toned beeps heard from the front speakers are for objects detected near the front bumper. Low-toned beeps heard from the rear speakers are for objects detected near the rear bumper. When an object is detected, high or low‐tone beeps are heard. As the vehicle gets closer to an object, the time between the beeps becomes shorter. When the distance is less than 30 cm (11.8 in), beeping is continuous. The distance may be less during warmer or humid weather.
8-40 Driving and Operating Turning the System On and Off The UFRPA system can be turned on and off by pressing the park assist button located next to the shift lever. The park assist button lights up when the system is on and turns off when it has been disabled. When the System Does Not Seem to Work Properly If UFRPA does not turn on due to a temporary condition, the message PARK ASSIST OFF displays on the DIC, and the light on the park assist button turns off.
Driving and Operating Rear Vision Camera (RVC) The vehicle may have a Rear Vision Camera system. Read this entire section before using it. The rear vision camera system can assist the driver when backing up by displaying a view of the area behind the vehicle. { WARNING The Rear Vision Camera (RVC) system does not replace driver vision. RVC does not: . Detect objects that are outside the camera's field of view, below the bumper, or underneath the vehicle. .
8-42 Driving and Operating Turning the Rear Vision Camera System On or Off To turn the rear vision camera system on or off: 1. Shift into P (Park). 2. Press the CONFIG button. 3. Select Display. Symbols Guidelines The navigation system may have a feature that lets the driver view symbols on the navigation screen while using the rear vision camera. The Ultrasonic Rear Park Assist (URPA) system must not be disabled to use the caution symbols.
Driving and Operating Rear Vision Camera Location 8-43 It does not display objects that are close to either corner or under the bumper and can vary depending on vehicle orientation or road conditions. The distance of the image that appears on the screen is different from the actual distance. The following illustration shows the field of view that the camera provides. The camera is located above the license plate. The area displayed by the camera is limited. A. View displayed by the camera. B.
8-44 Driving and Operating When the System Does Not Seem To Work Properly The rear vision camera system may not work properly or display a clear image if: . The RVC is turned off. See “Turning the Rear Camera System On or Off” earlier in this section. . It is dark. . The sun or the beam of headlights is shining directly into the camera lens. . Ice, snow, mud, or anything else builds up on the camera lens. Clean the lens, rinse it with water, and wipe it with a soft cloth. .
Driving and Operating The VIN is at the top left of the instrument panel. See Vehicle Identification Number (VIN) on page 11‑1. Recommended Fuel If the vehicle has the 3.0L V6 engine (VIN Code Y), use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, an audible knocking noise, commonly referred to as spark knock, might be heard when driving. If this occurs, use a gasoline rated at 87 octane or higher as soon as possible.
8-46 Driving and Operating California Fuel Requirements Fuels in Foreign Countries If the vehicle is certified to meet California Emissions Standards, it is designed to operate on fuels that meet California specifications. See the underhood emission control label. If this fuel is not available in states adopting California emissions standards, the vehicle will operate satisfactorily on fuels meeting federal specifications, but emission control system performance might be affected.
Driving and Operating For customers who do not use TOP TIER Detergent Gasoline regularly, one bottle of GM Fuel System Treatment PLUS, added to the fuel tank at every engine oil change, can help clean deposits from fuel injectors and intake valves. GM Fuel System Treatment PLUS is the only gasoline additive recommended by General Motors. It is available at your dealer/retailer. Gasolines containing oxygenates, such as ethers and ethanol, and reformulated gasolines might be available in your area.
8-48 Driving and Operating Filling the Tank Lamp could turn on. See Malfunction Indicator Lamp on page 4‑20. { WARNING Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. Turn off the engine when refueling. Do not smoke near fuel or when refueling the vehicle. Do not use cellular phones. Keep sparks, flames, and smoking materials away from fuel.
Driving and Operating The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. See Malfunction Indicator Lamp on page 4‑20. { WARNING If a fire starts while you are refueling, do not remove the nozzle. Shut off the flow of fuel by shutting off the pump or by notifying the station attendant. Leave the area immediately.
8-50 Driving and Operating Towing General Towing Information Only use towing equipment that has been designed for the vehicle. Contact your dealer/retailer or trailering retailer for assistance with preparing the vehicle for towing a trailer. See the following trailer towing information in this section: . For information on driving while towing a trailer, see “Driving Characteristics and Towing Tips”. . For maximum vehicle and trailer weights, see “Trailer Towing”. .
Driving and Operating . . Do not tow a trailer at all during the first 1 600 km (1,000 miles) the new vehicle is driven. The engine, axle or other parts could be damaged. During the first 800 km (500 miles) that a trailer is towed, do not drive over 80 km/h (50 mph) and do not make starts at full throttle. This reduces wear on the vehicle. . The vehicle can tow in D (Drive). Use a lower gear if the transmission shifts too often. . Do not use the Fuel Saver Mode when towing. .
8-52 Driving and Operating Backing Up Hold the bottom of the steering wheel with one hand. To move the trailer to the left, move that hand to the left. To move the trailer to the right, move your hand to the right. Always back up slowly and, if possible, have someone guide you. Making Turns Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. The vehicle could be damaged. Avoid making very sharp turns while trailering.
Driving and Operating Parking on Hills { WARNING Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer can be damaged. When possible, always park the rig on a flat surface. 8-53 If parking the rig on a hill: Leaving After Parking on a Hill 1. Press the brake pedal, but do not shift into P (Park) yet.
8-54 Driving and Operating Maintenance When Trailer Towing Engine Cooling When Trailer Towing Weight of the Trailer The vehicle needs service more often when pulling a trailer. See this manual's Maintenance Schedule or Index for more information. Things that are especially important in trailer operation are automatic transmission fluid, engine oil, axle lubricant, belts, cooling system and brake system. Inspect these before and during the trip.
Driving and Operating 8-55 Use the following chart to determine how much the vehicle can weigh, based upon the vehicle model and options. Vehicle 2.8L Engine, AWD Maximum Trailer Weight GCWR* 1 588 kg (3,500 lbs) 3 725 kg (8,212 lbs) 3.0L Engine, FWD 1 134 kg (2,500 lbs) 3 187 kg (7,025 lbs) 3.0L Engine, FWD with Trailering Package 1 588 kg (3,500 lbs) 3 640 kg (8,025 lbs) 3.0L Engine, AWD 1 134 kg (2,500 lbs) 3 271 kg (7,212 lbs) 3.
8-56 Driving and Operating Trailering may be limited by the vehicle's ability to carry tongue weight. Tongue weight cannot cause the vehicle to exceed the GVWR (Gross Vehicle Weight Rating) or the RGAWR (Rear Gross Axle Weight Rating). The effect of additional weight may reduce the trailering capacity more than the total of the additional weight. It has a GVWR of 3 266 kg (7,200 lbs), a RGAWR of 1 814 kg (4,000 lbs) and a GCWR (Gross Combination Weight Rating) of 6 350 kg (14,000 lbs).
Driving and Operating Since the rear axle already weighs 1 225 kg (2,700 lbs), adding 578 kg (1,275 lbs) brings the total to 1 803 kg (3,975 lbs). This is very close to, but within the limit for RGAWR as well. The vehicle is set to trailer up to 3 856 kg (8,500 lbs). If the vehicle has many options and there is a front seat passenger and two rear seat passengers with some luggage and gear in the vehicle as well.
8-58 Driving and Operating Towing Equipment Hitch Cover 1. Hold the cover at a 45 degree angle to the vehicle and push the upper tabs in the hitch cover into the slots in the fascia. Hitches It is important to have the correct hitch equipment. Crosswinds, large trucks going by and rough roads are a few reasons why the right hitch is needed. . . The rear bumper on the vehicle is not intended for hitches. Do not attach rental hitches or other bumper-type hitches to it.
Driving and Operating Trailer Brakes A loaded trailer that weighs more than 450 kg (1,000 lbs) needs to have its own brake system that is adequate for the weight of the trailer. Be sure to read and follow the instructions for the trailer brakes so they are installed, adjusted and maintained properly. Trailer Sway Control (TSC) The vehicle has a Trailer Sway Control (TSC) feature as part of the StabiliTrak system. If TSC detects that the trailer is swaying, the vehicle's brakes are automatically applied.
8-60 Driving and Operating 2 NOTES
Vehicle Care Vehicle Care General Information General Information . . . . . . . . . . . 9-2 California Proposition 65 Warning . . . . . . . . . . . . . . . . . . 9-2 California Perchlorate Materials Requirements . . . . . . . . . . . . . . . 9-3 Accessories and Modifications . . . . . . . . . . . . . . . . 9-3 Vehicle Checks Doing Your Own Service Work . . . . . . . . . . . . . . . . 9-4 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5 Engine Compartment Overview . . . . . . . . . . . . . . .
9-2 Vehicle Care Wheel Alignment and Tire Balance . . . . . . . . . . . . . . . . . . . . 9-73 Wheel Replacement . . . . . . . . . 9-73 Tire Chains . . . . . . . . . . . . . . . . . . 9-74 If a Tire Goes Flat . . . . . . . . . . . 9-74 Tire Sealant and Compressor Kit (Without Selector Switch) . . . . . . . . . . . . . . . . . . . . . 9-76 Tire Sealant and Compressor Kit (With Selector Switch) . . . . . . . . . . . . . . . . . . . . . 9-84 Storing the Tire Sealant and Compressor Kit . . . . . . . . . . . .
Vehicle Care California Perchlorate Materials Requirements Accessories and Modifications Certain types of automotive applications, such as airbag initiators, seat belt pretensioners, and lithium batteries contained in remote keyless transmitters, may contain perchlorate materials. Special handling may be necessary. For additional information, see www.dtsc.ca.gov/hazardouswaste/ perchlorate.
9-4 Vehicle Care Vehicle Checks Doing Your Own Service Work { WARNING You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. . Be sure you have sufficient knowledge, experience, the proper replacement parts, and tools before attempting any vehicle maintenance task. (Continued) WARNING (Continued) . Be sure to use the proper nuts, bolts, and other fasteners. English and metric fasteners can be easily confused.
Vehicle Care Hood To open the hood: 1. Pull the release handle with the above symbol on it. It is located below the instrument panel to the left of the steering wheel. 2. Move the secondary hood release lever to the right to release the striker. The lever is located near the middle of the hood. 3. Lift the hood. Before closing the hood, be sure all the filler caps are on properly.
9-6 Vehicle Care Engine Compartment Overview 2.
Vehicle Care A. Engine Air Cleaner/Filter on page 9‑14. B. Power Steering Reservoir and Cap. See Power Steering Fluid on page 9‑22. C. Engine Oil Fill Cap. See Engine Oil on page 9‑10. D. Engine Oil Dipstick (Out of View). See Engine Oil on page 9‑10. E. Brake Master Cylinder Reservoir. See Brakes on page 9‑24. F. Battery (Out of View). See Battery on page 9‑27. G. Engine Coolant Surge Tank and Pressure Cap. See Engine Coolant on page 9‑17. H. Remote Positive (+) Terminal. See Jump Starting on page 9‑101.
9-8 Vehicle Care 3.
Vehicle Care A. Engine Air Cleaner/Filter on page 9‑14. B. Power Steering Reservoir and Cap (Under engine cover). See Power Steering Fluid on page 9‑22. H. Engine Coolant Surge Tank and Pressure Cap. See Engine Coolant on page 9‑17. I. J. Remote Positive (+) Terminal. See Jump Starting on page 9‑101. D. Engine Oil Dipstick (Out of View). See Engine Oil on page 9‑10. K. Remote Negative (−) Terminal (Out of View). See Jump Starting on page 9‑101. E. Engine Cover on page 9‑9. L.
9-10 Vehicle Care Engine Oil When to Add Engine Oil Checking Engine Oil If the oil is below the cross-hatched area at the tip of the dipstick, add at least one liter/quart of the recommended oil. This section explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and Specifications on page 11‑2. It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground.
Vehicle Care What Kind of Engine Oil to Use . SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. Look for three things: . GM4718M This vehicle's engine requires a special oil meeting GM Standard GM4718M. Oils meeting this standard may be identified as synthetic. However, not all synthetic oils will meet this GM standard. Use only an oil that meets GM Standard GM4718M.
9-12 Vehicle Care Engine Oil Life System When to Change Engine Oil This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed.
Vehicle Care The oil life system can also be reset as follows: 1. Turn the ignition to ON/RUN with the engine off. 2. Fully press and release the accelerator pedal three times within five seconds. If the “Change Engine Oil Soon” message is not on, the system is reset. The system is reset when the “Change Engine Oil Soon” message is off. What to Do with Used Oil Used engine oil contains elements that can be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin.
9-14 Vehicle Care Engine Air Cleaner/Filter See Engine Compartment Overview on page 9‑6 for the location of the engine air cleaner/filter. When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the Maintenance II intervals and replace it at the first oil change after each 80 000 km (50,000 mile) interval. See Scheduled Maintenance on page 10‑2 for more information. If driving in dusty/dirty conditions, inspect the filter at each engine oil change.
Vehicle Care 8. Replace air cleaner cover by inserting tabs appropriately into slots. Lower cover to meet bottom of box. Place clips on retention features and clip closed. 9. Retighten the air duct clamp. 10. Reconnect the electrical connectors. A. Cover Cut Outs B. Air Filter Tabs 7. To install the air filter, place filter inside box where the pleats fit in between the tabs located inside the lower box. Ensure that the cover cut outs (A) on both sides match the air filter tabs (B) on both sides.
9-16 Vehicle Care Cooling System When it is safe to lift the hood: { WARNING { WARNING An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan. Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down.
Vehicle Care Notice: Using coolant other than DEX-COOL® can cause premature engine, heater core, or radiator corrosion. In addition, the engine coolant could require changing sooner, at 50 000 km (30,000 miles) or 24 months, whichever occurs first. Any repairs would not be covered by the vehicle warranty. Always use DEX-COOL® (silicate-free) coolant in the vehicle. Engine Coolant The cooling system in the vehicle is filled with DEX-COOL® engine coolant.
9-18 Vehicle Care Checking Coolant The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level is not at the indicated mark, add a 50/50 mixture of clean, drinkable water and DEX-COOL® coolant at the coolant surge tank, but be sure the cooling system is cool before this is done.
Vehicle Care { WARNING { WARNING Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle's coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned.
9-20 Vehicle Care 2. Then keep turning the pressure cap slowly and remove it. 3. Fill the coolant surge tank with the proper DEX-COOL® coolant mixture to the indicated level mark. 4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan. By this time, the coolant level inside the coolant surge tank may be lower.
Vehicle Care If Steam Is Coming From The Engine Compartment { WARNING Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down. Wait until there is no sign of steam or coolant before you open the hood. If you keep driving when your engine is overheated, the liquids in it can catch fire. You or others could be badly burned.
9-22 Vehicle Care If the temperature overheat gauge is no longer in the overheat zone or an overheat warning no longer displays, the vehicle can be driven. Continue to drive the vehicle slow for about 10 minutes. Keep a safe vehicle distance from the car in front of you. If the warning does not come back on, continue to drive normally. If the warning continues, pull over, stop, and park the vehicle right away. If there is no sign of steam, idle the engine for three minutes while parked.
Vehicle Care What to Use Adding Washer Fluid To determine what kind of fluid to use, see Recommended Fluids and Lubricants on page 10‑6. Always use the proper fluid. The WASHER FLUID LOW ADD FLUID message appears on the Driver Information Center (DIC) when the fluid level is low. Notice: . When using concentrated washer fluid, follow the manufacturer's instructions for adding water. . Do not mix water with ready-to-use washer fluid.
9-24 Vehicle Care Brakes This vehicle has disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound can come and go or be heard all the time the vehicle is moving, except when applying the brake pedal firmly. { WARNING The brake wear warning sound means that soon the brakes will not work well. That could lead to an accident. When the brake wear warning sound is heard, have the vehicle serviced.
Vehicle Care Replacing Brake System Parts The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. The vehicle was designed and tested with top-quality brake parts. When parts of the braking system are replaced, be sure to get new, approved replacement parts. If this is not done, the brakes might not work properly.
9-26 Vehicle Care Do not top off the brake fluid. Adding fluid does not correct a leak. If fluid is added when the linings are worn, there will be too much fluid when new brake linings are installed. Add or remove brake fluid, as necessary, only when work is done on the brake hydraulic system. { WARNING If too much brake fluid is added, it can spill on the engine and burn, if the engine is hot enough. You or others could be burned, and the vehicle could be damaged.
Vehicle Care Battery Vehicle Storage Refer to the replacement number shown on the original battery label when a new battery is needed. See Engine Compartment Overview on page 9‑6 for battery location. { DANGER Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. { WARNING Batteries have acid that can burn you and gas that can explode.
9-28 Vehicle Care Starter Switch Check { WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. 2. Firmly apply both the parking brake and the regular brake. See Parking Brake on page 8‑29. Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts. 3. Try to start the engine in each gear.
Vehicle Care Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 10‑2 for more information. It is a good idea to clean or replace the wiper blade assembly on a regular basis or when worn. For proper windshield wiper blade length and type, see Maintenance Replacement Parts on page 10‑8. Front Wiper Blade Replacement To replace the wiper blade assembly: 1. Pull the windshield wiper assembly away from the windshield. 3.
9-30 Vehicle Care 2. Slide cover towards wiper blade tip to unhook from blade assembly. To remove the wiper blade: 1. Lift the wiper arm away from the windshield. 3. Remove the cover. 3. Push the new blade assembly securely on the wiper arm until the release lever clicks into place. 4. After wiper blade replacement, ensure that cover hook slides into slot in blade assembly. 5. 2. Push the release lever (B) to disengage the hook and push the wiper arm (A) out of the blade assembly (C).
Vehicle Care Headlamp Aiming The vehicle should be properly prepared as follows: The headlamp aiming system has been preset at the factory. . If the vehicle is damaged in an accident, the aim of the headlamps can be affected and adjustment could be necessary. It is recommended that a dealer/ retailer adjust the headlamps. To re-aim the headlamps yourself, use the following procedure. The vehicle should be placed so the headlamps are 7.6 m (25 ft) from a light colored wall. .
9-32 Vehicle Care To adjust the vertical aim: 1. Open the hood. See Hood on page 9‑5 for more information. Up-level Vehicle Base Vehicle 2. Locate the aim point at the center inner projector condensing lens of the low-beam headlamp (not the outer lens). 3. Measure the distance from the ground to the aim dot on the low‐beam headlamp. Record the distance. 4. At the wall measure from the ground upward (A) to the recorded distance from Step 3 and mark it. 5.
Vehicle Care For the vehicle that is equipped with an up-level headlamp (HID), there will be two vertical headlamp aiming screws (V1 and V2). The aiming screw (V1) is adjusted from the engine compartment side of the beauty cover and the aiming screw (V2) is adjusted through the access hole in the beauty cover. Notice: Do not cover a headlamp to improve beam cut-off when aiming. Covering a headlamp may cause excessive heat build-up which may cause damage to the headlamp. 6.
9-34 Vehicle Care 8. For the base vehicle, turn the vertical aiming screw (V1) until the headlamp beam is aimed to the horizontal tape line. Turn it clockwise or counterclockwise to raise or lower the angle of the beam. For the up-level vehicle, turn the vertical aiming screws (V1 and V2) simultaneously until the headlamp beam is aimed to the horizontal tape line. Turn them clockwise or counterclockwise to raise or lower the angle of the beam.
Vehicle Care High Intensity Discharge (HID) Lighting 9-35 Headlamps { WARNING The low beam high intensity discharge lighting system operates at a very high voltage. If you try to service any of the system components, you could be seriously injured. Have your dealer/retailer or a qualified technician service them. The up‐level vehicle has HID headlamps. The park lamp function is also a function of the HID headlamp.
9-36 Vehicle Care Driver Side The removal of the underhood electrical center is required for the replacement of one of these bulbs: 1. Open the hood. See Hood on page 9‑5. { WARNING Up–Level Headlamp Assembly (Driver side shown, Passenger side similar) Up–Level Headlamp Assembly (Driver side shown, Passenger side similar) A. High/Low‐Beam Headlamp A. High/Low‐Beam Headlamp B. Daytime Running Lamp (DRL) B. Daytime Running Lamp (DRL) C. Turn Signal Lamp C.
Vehicle Care Passenger Side The removal of the air filter/cleaner assembly and base is required for the replacement of one of these bulbs: 1. Open the hood. See Hood on page 9‑5. 9-37 3. Remove the connector lock (B) located at the bottom of the sensor connector (C). 4. Press on the top and bottom of the sensor connectors (C) and remove. 5. Lift the three retaining clips (D) on the air filter housing. 6. Turn and tilt cover slightly upwards and slide cover away from outside edge of vehicle.
9-38 Vehicle Care Low-Beam Headlamps/Daytime Running Lamps (DRL), High-Beam Headlamps (Base) 6. Install the bulb socket in the headlamp assembly. 7. Connect the electrical connector. 8. Install the cap with the down arrow pointing down in the back of the headlamp assembly. 9. For driver side, reinstall the underhood electrical center cover by latching three clips. 2. Remove the bottom cap for the high-beam headlamp bulb replacement from the back of the headlamp assembly. 1.
Vehicle Care 9-39 Daytime Running Lamp (DRL) (Up-Level) 3. Remove the DRL bulb socket from the headlamp assembly. Front Turn Signal Lamp (Base and Up-Level) To replace the Front Turn Signal Lamp: 4. Replace the bulb in the bulb socket. To replace the Front Turn Signal Lamp: 5. Install the bulb socket in the headlamp assembly. 1. Remove the turn signal lamp bulb socket from the headlamp assembly. 6. Connect the electrical connector. 7.
9-40 Vehicle Care Turn Signal Lamps To replace one of these bulbs: 1. Open the liftgate. See Liftgate (Manual) on page 1‑13 or Liftgate (Power) on page 1‑14. 4. Remove the two screws from the taillamp assembly. 5. Pull the taillamp assembly straight back to remove. A. Push Pin B. Taillamp Cover 2. Pull on push pin (A) to release the taillamp cover (B). 3. Remove the taillamp cover from the lamp assembly by pulling rearward from the top to unfasten from snap tabs. A. Turn Signal Lamp B.
Vehicle Care 8. Press a new bulb into the socket, insert it into the taillamp assembly and turn the bulb socket clockwise until it clicks. 9. Reinstall the taillamp assembly and tighten the screws. 9-41 Back-Up Lamps To replace one of these bulbs: 1. Open the liftgate. See Liftgate (Manual) on page 1‑13 or Liftgate (Power) on page 1‑14. 10. Reinstall the taillamp cover by snapping it into place. 11. Push the push pin to secure the taillamp cover. 4. Remove the two screws from the taillamp assembly. 5.
9-42 Vehicle Care 7. Turn the back–up bulb socket counterclockwise to remove it from the taillamp assembly. License Plate Lamp 8. Press a new bulb/socket into the taillamp assembly and turn the bulb/socket clockwise until it clicks. 1. Open the liftgate. See Liftgate (Manual) on page 1‑13 or Liftgate (Power) on page 1‑14 for more information. To replace one of these bulbs: 9. Reinstall the taillamp assembly and tighten the screws. A. Turn Signal Lamp B. Back–Up Bulb/Socket 10.
Vehicle Care 5. Pull the bulb (B) straight out of the bulb socket. 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into lamp assembly. 7. Turn the lamp assembly into the liftgate engaging the clip side first. A. Bulb Socket B. Bulb C. Lamp Assembly 4. Turn the bulb socket (A) counterclockwise to remove from lamp assembly (C). 8. Push on the lamp side opposite the clip until the lamp assembly snaps into place.
9-44 Vehicle Care Electrical System Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect the following in the vehicle: . Headlamp Wiring .
Vehicle Care Engine Compartment Fuse Block To remove the fuse block cover, press the clips on the cover and lift it straight up. The vehicle might not have all the fuses and features listed. Notice: Spilling liquid on any electrical components on the vehicle may damage it. Always keep the covers on any electrical component.
9-46 Vehicle Care J-Case Fuses Usage 41 Cooling Fan 2 42 Starter 43 Not Used 44 Not Used 45 Cooling Fan 1 59 Secondary AIR Pump Mini Fuses Usage 1 Engine Control Module Battery 2 Transmission Control Module Battery 3 Mass Air Flow Sensor 4 Not Used 5 Engine Control Module Run Crank Mini Fuses Usage 7 Post–Catalytic Converter O2 Sensor 8 Pre–Catalytic Converter O2 Sensor 9 Engine Control Module Powertrain 10 Fuel Injectors–Even 11 Fuel Injectors–Odd 13 Washer 16 Ins
Vehicle Care Mini Fuses Usage Mini Fuses Usage 53 Headlamp Level 68 Spare 54 Sensing Diagnostic Module Ignition 69 Spare 55 High Beam Headlamp–Right 56 High Beam Headlamp–Left 57 Ignition Steering Column Lock 70 Spare 71 Spare 72 Spare Mini Relays Usage 7 Powertrain 9 Cooling Fan 2 65 Trailer Right Stop Lamp 13 Cooling Fan 1 66 Trailer Left Stop Lamp 15 Run/Crank 67 Spare 16 Secondary AIR Pump Micro Relays Usage 2 Vacuum Pump 4 Wiper Control 5 Wiper Speed 10
9-48 Vehicle Care Instrument Panel Fuse Block Mini Fuses The instrument panel fuse block is located in the center console between the driver and passenger seats. To access the fuses, open the fuse panel door from the passenger side by pulling it out. To reinstall the door, push the door back into its original location.
Vehicle Care Mini Fuses Usage RAIN SNSR Rain Sensor BCM 6 Body Control Module 6 ESCL Electronic Steering Column Lock AIRBAG Sensing and Diagnostic Module DLC IPC Data Link Connection Instrument Panel Cluster SPARE Not Used BCM 1 Body Control Module 1 Mini Fuses BCM 2 AMP/RDO HVAC J—Case Fuses Usage Body Control Module 2 Rear Compartment Fuse Block Amplifier/Radio Heating Ventilation & Air Conditioning Usage BCM 8 Body Control Module 8 FRT BLWR Front Blower Relays 9-49 Usage LOGIC
9-50 Vehicle Care Fuses SPARE FUSES AOS MDL Usage Spare Fuses Not Used SPARE Not Used SPARE Not Used Passenger Door Window Switch DRV Driver Power Seat PWR SEAT PASS DR Passenge/Driver PWR SEAT Power Seats MDL TRLR Trailer Module Rear Compartment Fuse Block RPA MDL Rear Parking Assist Module RDM Rear Drive Module PRK LPS TRLR Trailer Park Lamps FUEL PUMP * SEC Usage Security INFOTMNT Infotainment Automatic Occupant Sensing Module SPARE PASS DR WDO SW Fuses Fuel Pump * TRLR EXP Traile
Vehicle Care Fuses FRT HTD SEAT Usage Front Heated Seats THEFT HORN Theft Horn * LGATE Liftgate REAR DEFOG Rear Defog * BCM THEFT Body Control Module Theft * TRLR 2 UGDO Trailer 2 Universal Garage Door Opener RT WDO Right Window PRK BRK MDL Park Brake Module Fuses Usage Relays Usage SPARE Not Used SPARE Not Used LT WDO Left Window * FUEL PUMP Fuel Pump IGN/ THEFT 1 Ignition/Theft 1 LGATE MDL Liftgate Module IGN/ THEFT 2 Ignition/Theft 2 SPARE Not Used HTD MIR Heated Mirr
9-52 Vehicle Care Wheels and Tires Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your vehicle Warranty booklet for details. For additional information refer to the tire manufacturer. { WARNING Poorly maintained and improperly used tires are dangerous. . . Overloading your tires can cause overheating as a result of too much flexing.
Vehicle Care Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples below show a typical passenger vehicle tire and a compact spare tire sidewall. Passenger (P‐Metric) Tire Example (A) Tire Size: The tire size is a combination of letters and numbers used to define a particular tire's width, height, aspect ratio, construction type, and service description. See the “Tire Size” illustration later in this section for more detail.
9-54 Vehicle Care regular road tire has lost air and gone flat. If your vehicle has a compact spare tire, see Compact Spare Tire on page 9‑100 and If a Tire Goes Flat on page 9‑74. Compact Spare Tire Example (A) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (B) Temporary Use Only: The compact spare tire or temporary use tire has a tread life of approximately 5 000 km (3,000 miles) and should not be driven at speeds over 105 km/h (65 mph).
Vehicle Care Tire Designations Tire Size The following illustration shows an example of a typical passenger vehicle tire size. (A) Passenger (P‐Metric) Tire: The United States version of a metric tire sizing system. The letter P as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.S. Tire and Rim Association. (B) Tire Width: The three‐digit number indicates the tire section width in millimeters from sidewall to sidewall.
9-56 Vehicle Care Tire Terminology and Definitions Air Pressure: The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in psi (pounds per square inch) or kPa (kilopascal). Accessory Weight: This means the combined weight of optional accessories. Some examples of optional accessories are, automatic transmission, power steering, power brakes, power windows, power seats, and air conditioning.
Vehicle Care GAWR FRT: Gross Axle Weight Rating for the front axle. See Vehicle Load Limits on page 8‑11. GAWR RR: Gross Axle Weight Rating for the rear axle. See Vehicle Load Limits on page 8‑11. Intended Outboard Sidewall : The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. Kilopascal (kPa): The metric unit for air pressure. Light Truck (LT‐Metric) Tire: A tire used on light duty trucks and some multipurpose passenger vehicles.
9-58 Vehicle Care Radial Ply Tire: A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim: A metal support for a tire and upon which the tire beads are seated. Sidewall: The portion of a tire between the tread and the bead. Speed Rating: An alphanumeric code assigned to a tire indicating the maximum speed at which a tire can operate. Traction: The friction between the tire and the road surface. The amount of grip provided.
Vehicle Care Tire Pressure Tires need the correct amount of air pressure to operate effectively. If your tires have too much air (over‐inflation), you can get the following: . Unusual wear Notice: Do not let anyone tell . Poor handling you that under‐inflation or over‐inflation is all right. It is not. If your tires do not have enough air (under‐inflation), you can get the following: . Rough ride . Needless damage from road hazards . Too much flexing . Too much heat . Tire overloading .
9-60 Vehicle Care When to Check Check your tires once a month or more. Do not forget to check the compact spare tire, if the vehicle has one. The compact spare should be at 60 psi (420 kPa). For additional information regarding the compact spare tire, see Compact Spare Tire on page 9‑100. How to Check Use a good quality pocket-type gauge to check tire pressure. You cannot tell if your tires are properly inflated simply by looking at them.
Vehicle Care Vehicles with P235/65R18, P235/ 55R20, or 235/55R20 size tires require inflation pressure adjustment when driving your vehicle at speeds of 100 mph (160 km/h) or higher. Set the cold inflation pressure to the maximum inflation pressure shown on the tire sidewall, or 44 psi (300 kPa), whichever is lower. When you end this high-speed driving, return the tires to the cold tire inflation pressure shown on the Tire and Loading Information label.
9-62 Vehicle Care Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under‐inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale.
Vehicle Care When a low tire pressure condition is detected, the TPMS illuminates the low tire pressure warning light located on the instrument panel cluster. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the tire loading information label. See Vehicle Load Limits on page 8‑11. At the same time a message to check the pressure appears on the Driver Information Center (DIC) display.
9-64 Vehicle Care TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle. A DIC warning message is also displayed. The low tire warning light and DIC warning message come on at each ignition cycle until the problem is corrected.
Vehicle Care TPMS Sensor Matching Process Each TPMS sensor has a unique identification code. Any time you rotate your vehicle's tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. The sensors are matched to the tire/wheel positions in the following order: driver side front tire, passenger side front tire, passenger side rear tire, and driver side rear tire using a TPMS diagnostic tool. See your dealer/retailer for service.
9-66 Vehicle Care 7. Start with the driver side front tire. 8. Remove the valve cap from the valve cap stem. Activate the TPMS sensor by increasing or decreasing the tire's air pressure for five seconds, or until a horn chirp sounds. The horn chirp, which may take up to 30 seconds to sound, confirms that the sensor identification code has been matched to this tire and wheel position. 9. Proceed to the passenger side front tire, and repeat the procedure in Step 5. 10.
Vehicle Care Any time you notice unusual wear, rotate the tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 9‑68 and Wheel Replacement on page 9‑73. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Tire and Loading Information label. See Tire Pressure on page 9‑59 and Vehicle Load Limits on page 8‑11. Reset the Tire Pressure Monitor System.
9-68 Vehicle Care When It Is Time for New Tires Various factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions influence when you need new tires. One way to tell when it is time for new tires is to check the treadwear indicators, which appear when the tires have only 1.6 mm (1/16 inch) or less of tread remaining. The vehicle needs new tires if any of the following statements are true: . You can see the indicators at three or more places around the tire. .
Vehicle Care GM's exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM's TPC Spec number is molded onto the tire's sidewall near the tire size. If the tires have an all‐season tread design, the TPC Spec number will be followed by an MS for mud and snow. See Tire Sidewall Labeling on page 9‑53 for additional information.
9-70 Vehicle Care Vehicles that have a tire pressure monitoring system could give an inaccurate low‐pressure warning if non‐TPC Spec rated tires are installed on your vehicle. Non‐TPC Spec rated tires may give a low‐pressure warning that is higher or lower than the proper warning level you would get with TPC Spec rated tires. See Tire Pressure Monitor System on page 9‑61. Your vehicle's original equipment tires are listed on the Tire and Loading Information Label.
Vehicle Care Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance. This applies only to vehicles sold in the United States.
9-72 Vehicle Care Traction – AA, A, B, C Temperature – A, B, C The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
Vehicle Care Wheel Alignment and Tire Balance The tires and wheels on the vehicle were aligned and balanced carefully at the factory to give the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing will not be necessary on a regular basis. However, if there is unusual tire wear or the vehicle pulls to one side or the other, the alignment should be checked. If the vehicle vibrates when driving on a smooth road, the tires and wheels might need to be rebalanced.
9-74 Vehicle Care Used Replacement Wheels { WARNING Putting a used wheel on the vehicle is dangerous. You cannot know how it has been used or how far it has been driven. It could fail suddenly and cause a crash. If you have to replace a wheel, use a new GM original equipment wheel. Tire Chains { WARNING Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension or other vehicle parts.
Vehicle Care It may be very bumpy and noisy, but you can still steer. Gently brake to a stop, well off the road if possible. { WARNING Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tire. If it is used for anything else, you or others could be badly injured or killed if the vehicle slips off the jack.
9-76 Vehicle Care When the vehicle has a flat tire (B), use the following example as a guide to assist you in the placement of wheel blocks (A). Tire Sealant and Compressor Kit (Without Selector Switch) System Identification If the vehicle has the tire sealant and compressor kit shown above, follow the operating instructions under "Tire Sealant and Compressor Kit (With Selector Switch).” A. Wheel Block B. Flat Tire The following information explains how to repair or change a tire.
Vehicle Care { WARNING { WARNING Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has no fresh air ventilation. For more information, see Engine Exhaust on page 8‑22. Over-inflating a tire could cause the tire to rupture and you or others could be injured.
9-78 Vehicle Care The kit includes: Tire Sealant Read and follow the safe handling instructions on the label adhered to the sealant canister. Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire Check the tire sealant expiration date on the sealant canister. The sealant canister should be replaced before its expiration date. Replacement sealant canisters are available at your local dealer/ retailer. See “Removal and Installation of the Sealant Canister” following.
Vehicle Care Always do a safety check first. See If a Tire Goes Flat on page 9‑74. 1. Remove the tire sealant and compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit on page 9‑93. Make sure the on/off button (D) is in the off (O) position. 2. Unwrap the sealant/air hose (G) and the power plug (C). 3. Place the kit on the ground. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 4.
9-80 Vehicle Care 9. Inflate the tire to the recommended inflation pressure using the pressure gauge (E). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure on page 9‑59. The pressure gauge (E) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate pressure reading. The compressor may be turned on/off until the correct pressure is reached.
Vehicle Care 15. If the flat tire was able to inflate to the recommended inflation pressure, remove the maximum speed label from the sealant canister (B) and place it in a highly visible location. The label is a reminder not to exceed 55 mph (90 km/h) until the damaged tire is repaired or replaced. 16. Return the equipment to its original storage location in the vehicle. 17. Immediately drive the vehicle 5 miles (8 km) to distribute the sealant in the tire. 18.
9-82 Vehicle Care Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) To use the air compressor to inflate a tire with air only and not sealant: 2. Unlock the air only hose (F) from the sealant canister (B) by pulling up on the lever. 3. Pull the air only hose (F) from the sealant canister (B). 4. Remove the power plug (C) from the air compressor (A). 5. Place the kit on the ground.
Vehicle Care 11. Inflate the tire to the recommended inflation pressure using the pressure gauge (E). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure on page 9‑59. 13. Unplug the power plug (C) from the accessory power outlet in the vehicle. The pressure gauge (E) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate reading.
9-84 Vehicle Care To install a new sealant canister: 1. Align the sealant/air hose (G) with the slot in the air compressor. 2. Push the sealant canister (B) down and turn it clockwise. Tire Sealant and Compressor Kit (With Selector Switch) System Identification 3. Wrap the sealant/air hose (G) around the air compressor channel to stow it in its original location. 4. Turn the sealant canister (B) so the inflator filling hose is aligned with the slot in the compressor. 5.
Vehicle Care If the vehicle has the tire sealant and compressor kit shown above, follow the operating instructions under “Tire Sealant and Compressor Kit (Without Selector Switch). 9-85 { WARNING { WARNING Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death.
9-86 Vehicle Care If this vehicle has a tire sealant and compressor kit, there may not be a spare tire, tire changing equipment, and on some vehicles there may not be a place to store a tire. The kit includes: A. Selector Switch (Sealant/Air or Air Only) B. On/Off Button C. Pressure Gauge The tire sealant and compressor can be used to temporarily seal punctures up to ¼ inch (6 mm) in the tread area of the tire. It can also be used to inflate an under inflated tire. D.
Vehicle Care Tire Sealant Read and follow the safe handling instructions on the label adhered to the sealant canister. Check the tire sealant expiration date on the sealant canister. The sealant canister should be replaced before its expiration date. Replacement sealant canisters are available at your local dealer/ retailer. See “Removal and Installation of the Sealant Canister” following. There is only enough sealant to seal one tire.
9-88 Vehicle Care 5. Attach the sealant/air hose (F) onto the tire valve stem. Turn it clockwise until it is tight. 6. Plug the power plug (H) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets on page 4‑12. If the vehicle has an accessory power outlet, do not use the cigarette lighter. If the vehicle only has a cigarette lighter, use the cigarette lighter. Do not pinch the power plug cord in the door or window. 7. Start the vehicle.
Vehicle Care 12. Unplug the power plug (H) from the accessory power outlet in the vehicle. exceed 55 mph (90 km/h) until the damaged tire is repaired or replaced. 13. Turn the sealant/air hose (F) counterclockwise to remove it from the tire valve stem. 17. Return the equipment to its original storage location in the vehicle. 14. Replace the tire valve stem cap. 18. Immediately drive the vehicle 5 miles (8 km) to distribute the sealant in the tire. 15.
9-90 Vehicle Care Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) To use the air compressor to inflate a tire with air only and not sealant: Always do a safety check first. See If a Tire Goes Flat on page 9‑74. 1. Remove the tire sealant and compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit on page 9‑93. 2. Unwrap the air only hose (G) and the power plug (H). 3. Place the kit on the ground.
Vehicle Care 6. Plug the power plug (H) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets on page 4‑12. If the vehicle has an accessory power outlet, do not use the cigarette lighter. If the vehicle only has a cigarette lighter, use the cigarette lighter. Do not pinch the power plug cord in the door or window. 7. Start the vehicle. The vehicle must be running while using the air compressor. 8.
9-92 Vehicle Care 13. Disconnect the air only hose (G) from the tire valve stem, by turning it counterclockwise, and replace the tire valve stem cap. Removal and Installation of the Sealant Canister 14. Replace the air only hose (G) and the power plug (H) and cord back in its original location. 2. Press the canister release button. 15. Place the equipment in the original storage location in the vehicle. To remove the sealant canister: 1. Unwrap the sealant hose. 3. Pull up and remove the canister.
Vehicle Care Storing the Tire Sealant and Compressor Kit 9-93 Tire Changing Removing the Spare Tire and Tools To access the spare tire and tools: 1. Open the liftgate. See Liftgate (Manual) on page 1‑13 or Liftgate (Power) on page 1‑14. Without Selector Switch With Selector Switch This vehicle may have a tire sealant and compressor kit in place of a jack or spare tire. It is located in a foam container in the rear compartment storage area. See Cargo Management System on page 3‑5. 2.
9-94 Vehicle Care 3. Remove the spare tire cover. 4. Remove the nut retaining the spare tire. 5. Remove the spare tire and place it next to the tire being changed. 6. Remove the wing nut (D). 7. Remove the extension (A), jack (B) and wheel wrench (C) and place them near the tire being changed.
Vehicle Care 9-95 Removing the Flat Tire and Installing the Spare Tire Take off the wheel cover or center cap, if the vehicle has one, to reach the wheel bolts. 1. Do a safety check before proceeding. See If a Tire Goes Flat on page 9‑74 for more information. 2. Turn the wheel wrench counterclockwise to loosen and remove the wheel nut caps. Do not try to remove plastic caps from the cover or center cap. 3. Pull the cover or center cap away from the wheel.
9-96 Vehicle Care { WARNING { WARNING Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tire.
Vehicle Care 10. Put the compact spare tire near you. 9-97 WARNING (Continued) rust or dirt from places where the wheel attaches to the vehicle. In an emergency, use a cloth or a paper towel to do this; but be sure to use a scraper or wire brush later, if needed, to get all the rust or dirt off. See If a Tire Goes Flat on page 9‑74. 9. Raise the vehicle by turning the wheel wrench clockwise until the slots in the jack head fit into the metal flange located behind the triangle on the plastic moulding.
9-98 Vehicle Care 13. Place the compact spare tire on the wheel-mounting surface. { WARNING { WARNING Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque specification after replacing. Follow the torque specification supplied by the aftermarket manufacturer when using accessory locking wheel nuts.
Vehicle Care When reinstalling the wheel cover or center cap on the full-size tire, tighten all five plastic caps hand snug with the aid of the wheel wrench and tighten them with the wheel wrench an additional one‐quarter of a turn. Notice: Wheel covers will not fit on your vehicle's compact spare. If you try to put a wheel cover on the compact spare, the cover or the spare could be damaged.
9-100 Vehicle Care Compact Spare Tire { WARNING Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a crash and you or others could be injured. Use only one compact spare tire at a time. 6. Route the strap through the wheel, as shown. 7. Attach the strap to the other cargo tie-down in the rear of the vehicle. 8. Tighten the strap. The compact spare is for temporary use only.
Vehicle Care Jump Starting If the vehicle battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. { WARNING Batteries can hurt you. They can be dangerous because: . They contain acid that can burn you. . They contain gas that can explode or ignite. . They contain enough electricity to burn you. If you do not follow these steps exactly, some or all of these things can hurt you.
9-102 Vehicle Care Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty. Always turn off the radio and other accessories when jump starting the vehicle. 3. Turn off the ignition on both vehicles. Unplug unnecessary accessories plugged into the cigarette lighter or the accessory power outlet. Turn off the radio and all lamps that are not needed.
Vehicle Care { WARNING Using an open flame near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle. But if a battery has filler caps, be sure the right amount of fluid is there. If it is low, add water to take care of that first. If you do not, explosive gas could be present.
9-104 Vehicle Care 8. Now connect the black negative (−) cable to the negative (−) terminal of the good battery. Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative (−) cable does not go to the dead battery. It goes to a heavy, unpainted metal engine part or to a remote negative (−) terminal on the vehicle with the dead battery. 9.
Vehicle Care To disconnect the jumper cables from both vehicles, do the following: Towing 1. Disconnect the black negative (−) cable from the vehicle that had the dead battery. Towing the Vehicle 2. Disconnect the black negative (−) cable from the vehicle with the good battery. 3. Disconnect the red positive (+) cable from the vehicle with the good battery. 4. Disconnect the red positive (+) cable from the other vehicle. 5. Close the access panel on the battery cover, if applicable.
9-106 Vehicle Care Here are some important things to consider before recreational vehicle towing: . What is the towing capacity of the towing vehicle? Be sure to read the tow vehicle manufacturer's recommendations. . What is the distance that will be travelled? Some vehicles have restrictions on how far and how long they can tow. . . Is the proper towing equipment going to be used? See your dealer/retailer or trailering professional for additional advice and equipment recommendations.
Vehicle Care 3. Shift the transmission to N (Neutral). See Shifting Out of Park on page 8‑21. Once the destination has been reached: 4. Turn all accessories off. 2. Shift the transmission to P (Park). See Shifting Into Park on page 8‑20. Notice: If the vehicle is towed without performing each of the steps listed under “Dinghy Towing,” the automatic transmission could be damaged. Be sure to follow all steps of the dinghy towing procedure prior to and after towing the vehicle.
9-108 Vehicle Care Dolly Towing (Front-Wheel‐ Drive Vehicles) 3. Set the parking brake. 4. Secure the vehicle to the dolly. 5. Follow the dolly manufacturer's instructions for preparing the vehicle and dolly for towing. 6. Release the parking brake. Towing the Vehicle From the Rear To tow the vehicle from the front with the rear wheels on the ground, do the following: 1. Put the front wheels on a dolly. 2. Move the shift lever to P (Park). See Shifting Into Park on page 8‑20.
Vehicle Care Appearance Care Exterior Care Cleaning Exterior Lamps/ Lenses Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow instructions under “Washing the Vehicle” later in this section. Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it. Use only non-abrasive waxes and polishes that are made for a basecoat/ clearcoat paint finish on the vehicle.
9-110 Vehicle Care Washing the Vehicle To preserve the vehicle's finish, keep it clean by washing it often. Do not wash the vehicle in direct sunlight and use a car washing soap. Notice: Certain cleaners contain chemicals that can damage the emblems or nameplates on the vehicle. Check the cleaning product label. If it states that it should not be used on plastic parts, do not use it on the vehicle or damage may occur and it would not be covered by the warranty.
Vehicle Care Wheels and Trim — Aluminum or Chrome The vehicle may have either aluminum or chrome-plated wheels. Keep the wheels clean using a soft clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft clean towel. A wax may then be applied. Notice: Chrome wheels and other chrome trim may be damaged if the vehicle is not washed after driving on roads that have been sprayed with magnesium, calcium or sodium chloride.
9-112 Vehicle Care Windshield and Wiper Blades Tires Finish Damage Clean the outside of the windshield with glass cleaner. Use a stiff brush with tire cleaner to clean the tires. Clean the rubber blades using a lint free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged.
Vehicle Care At least every spring, flush these materials from the underbody with plain water. Clean any areas where mud and debris can collect. Dirt packed in close areas of the frame should be loosened before being flushed. Your dealer/retailer or an underbody car washing system can do this. Chemical Paint Spotting Some weather and atmospheric conditions can create a chemical fallout. Airborne pollutants can fall upon and attack painted surfaces on the vehicle.
9-114 Vehicle Care Do not clean the interior using the following cleaners or techniques: . Never use a knife or any other sharp object to remove a soil from any interior surface. . Never use a stiff brush. It can cause damage to the vehicle's interior surfaces. . Never apply heavy pressure or rub aggressively with a cleaning cloth. Use of heavy pressure can damage the interior and does not improve the effectiveness of soil removal. . Use only mild, neutral-pH soaps.
Vehicle Care To clean: 1. Saturate a lint-free, clean white cloth with water or club soda. 2. Remove excess moisture. 3. Start on the outside edge of the soil and gently rub toward the center. Continue cleaning, using a clean area of the cloth each time it becomes soiled. 4. Continue to gently rub the soiled area. 5. If the soil is not completely removed, use a mild soap solution and repeat the cleaning process with plain water.
9-116 Vehicle Care Instrument Panel, Vinyl, and Other Plastic Surfaces To remove dust, a soft cloth dampened with water can be used. If a more thorough cleaning is necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and dirt. Never use spot lifters or removers on plastic surfaces.
Service and Maintenance Service and Maintenance General Information General Information . . . . . . . . . . 10-1 Scheduled Maintenance Scheduled Maintenance . . . . . 10-2 Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants . . . . . . . . . . . . . . . . . . 10-6 Maintenance Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 10-8 Maintenance Records Maintenance Records . . . . . . .
10-2 Service and Maintenance { WARNING Performing maintenance work can be dangerous. Some jobs can cause serious injury. Perform maintenance work only if you have the required know-how and the proper tools and equipment. If in doubt, see your dealer/ retailer to have a qualified technician do the work. See Doing Your Own Service Work on page 9‑4. At your General Motors dealer/ retailer, you can be certain that you will receive the highest level of service available.
Service and Maintenance If the engine oil life system is reset accidentally, service the vehicle within 5 000 km/3,000 miles since the last service. Reset the oil life system whenever the oil is changed. See Engine Oil Life System on page 9‑12. . Every Engine Oil Change . Change engine oil and filter. See Engine Oil on page 9‑10. An Emission Control Service. . Engine coolant level check. See Engine Coolant on page 9‑17. . Engine cooling system inspection.
10-4 Service and Maintenance Additional Required Services Once a Year At Each Fuel Stop . . Engine oil level check. See Engine Oil on page 9‑10. . Engine coolant level check. See Engine Coolant on page 9‑17. . Windshield washer fluid level check. See Washer Fluid on page 9‑23. . . Tire inflation check. See Tire Pressure on page 9‑59. Tire wear inspection. See Tire Inspection on page 9‑66. See Park Brake and P (Park) Mechanism Check on page 9‑28. .
Service and Maintenance First Engine Oil Change After Every 80 000 km/50,000 Miles . Engine air cleaner filter replacement. See Engine Air Cleaner/Filter on page 9‑14. . Automatic transmission fluid change (severe service) for vehicles mainly driven in heavy city traffic in hot weather, in hilly or mountainous terrain, when frequently towing a trailer, or used for taxi, police, or delivery service. See Automatic Transmission Fluid on page 9‑13.
10-6 Service and Maintenance Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants Usage Fluid/Lubricant Engine Oil The engine requires a special engine oil meeting GM Standard GM4718M. Oils meeting this standard can be identified with the American Petroleum Institute (API) Certified for Gasoline Engines starburst symbol. However, not all synthetic API oils with the starburst symbol will meet this GM standard. Look for and use only an oil that meets GM Standard GM4718M.
Service and Maintenance Usage Automatic Transmission (2.8L V6 Engine) 10-7 Fluid/Lubricant Automatic Transmission Fluid (GM Part No. U.S. 19256039, in Canada 19256040). Chassis Lubrication Chassis Lubricant (GM Part No. U.S. 12377985, in Canada 88901242) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. Key Lock Cylinders Multi-Purpose Lubricant, Superlube (GM Part No. U.S. 12346241, in Canada 10953474).
10-8 Service and Maintenance Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your retailer. Part GM Part Number ACDelco Part Number 20897358 A3147C 2.8L V6 Engine 12593333 PF457G 3.0L V6 Engine 89017524 PF48 13271191 CF176 2.8L V6 Engine 12622561 41–109 3.0L V6 Engine 12622561 41–109 Engine Air Cleaner/Filter Engine Oil Filter Passenger Compartment Air Filter Element Spark Plugs Wiper Blades Driver Side – 65.
Service and Maintenance 10-9 Maintenance Records After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts.
10-10 Service and Maintenance Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance Stamp Services Performed
Service and Maintenance Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance Stamp Services Performed 10-11
10-12 Service and Maintenance Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance Stamp Services Performed
Technical Data Technical Data Vehicle Identification Vehicle Identification Vehicle Identification Number (VIN) Vehicle Identification Number (VIN) . . . . . . . . . . . . . . 11-1 Service Parts Identification Label . . . . . . . . . . . . . . . . . . . . . . . 11-1 Vehicle Data Capacities and Specifications . . . . . . . . . . . . . . 11-2 Engine Drive Belt Routing . . . . 11-4 This legal identifier is in the front corner of the instrument panel, on the left side of the vehicle.
11-2 Technical Data Vehicle Data Capacities and Specifications Application Air Conditioning Refrigerant R134a Capacities Metric English For the air conditioning system refrigerant charge amount, see the refrigerant caution label located under the hood. See your dealer/retailer for more information. Engine Cooling System 2.8L V6 Engine 11.9 L 12.6 qt 3.0L V6 Engine 11.9 L 12.6 qt 2.8L V6 Engine 5.7 L 6.0 qt 3.0L V6 Engine 5.7 L 6.0 qt 79.5 L 21.
Technical Data Capacities Application Metric English — — 9.0 L 9.5 qt 150 Y 110 ft lb Transmission Fluid 2.8L V6 6–Speed Automatic (Transmission Requires No Fluid Replacement) 3.0L V6 6–Speed Automatic* (Drain and Refill) Wheel Nut Torque *See Automatic Transmission Fluid on page 9‑13 for information on checking fluid level. All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid level after filling.
11-4 Technical Data Engine Drive Belt Routing 2.8L, 3.
Customer Information Customer Information Customer Information Customer Satisfaction Procedure . . . . . . . . . . . . . . . . . . 12-1 Customer Assistance Offices . . . . . . . . . . . . . . . . . . . . . 12-3 Customer Assistance for Text Telephone (TTY) Users . . . . . 12-4 Online Owner Center . . . . . . . . 12-4 GM Mobility Reimbursement Program . . . . . . . . . . . . . . . . . . . . 12-5 Roadside Assistance Program . . . . . . . . . . . . . . . . . . . . 12-6 Roadside Service . . . . . . . . . . . .
12-2 Customer Information STEP TWO : If after contacting a member of dealership management, it appears your concern cannot be resolved by the dealership without further help, in the United States, call the Cadillac Customer Assistance Center, 24 hours a day, at 1-800-458-8006. In Canada, call the Canadian Cadillac Customer Communication Centre at 1-888-446-2000. We encourage you to call the toll-free number in order to give your inquiry prompt attention.
Customer Information STEP THREE (Canadian Owners): General Motors Participation in the Mediation/Arbitration Program In the event that you do not feel your concerns have been addressed after the following the procedure outlined in Steps One and Two. General Motors of Canada Limited wants you to be aware of its participation in a no-charge mediation/Arbitration program. General Motors of Canada Limited has committed to binding arbitration of owner disputes involving factory-related vehicle service claims.
12-4 Customer Information From Puerto Rico: 1-800-496-9992 (English) 1-800-496-9993 (Spanish) From U.S. Virgin Islands: 1-800-496-9994 Canada — Customer Assistance General Motors of Canada Limited Canadian Cadillac Customer Communication Centre, CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 www.gmcanada.
Customer Information Other Helpful Links: Cadillac — www.cadillac.com Cadillac Merchandise — www.cadillaccollection.com Help Center — www.cadillac.com/ helpcenter . FAQ . Contact Us My GM Canada (Canada) — www.gm.ca My GM Canada is a password-protected section of www.gm.ca where you can save information on GM vehicles, get personalized offers, and use handy tools and forms with greater ease. Here are a few of the valuable tools and services you will have access to: .
12-6 Customer Information General Motors of Canada also has a Mobility Program. Call 1-800-GM-DRIVE (463-7483) for details. TTY users call 1-800-263-3830. . Model, year, color, and license plate number of the vehicle . Odometer reading, Vehicle Identification Number (VIN), and delivery date of the vehicle Roadside Assistance Program . Description of the problem In the United States or Canada, call 1-800-882-1112.
Customer Information . . Emergency Tow From a Public Road or Highway: Tow to the nearest Cadillac dealer for warranty service, or if the vehicle was in a crash and cannot be driven. Assistance is also given when the vehicle is stuck in the sand, mud, or snow. Flat Tire Change: Service is provided to change a flat tire with spare tire. The spare tire, if equipped, must be in good condition and properly inflated.
12-8 Customer Information Services Specific to Canadian Purchased Vehicles . Fuel delivery: Reimbursement is approximately $5 Canadian. Diesel fuel delivery may be restricted. Propane and other fuels are not provided through this service. . Lock-Out Service: Vehicle registration is required. . Trip Routing Service: Limit of six requests per year. . Trip Interruption Benefits and Assistance: Pre-authorization, original detailed receipts, and a copy of the repair orders are required.
Customer Information Coverage Cadillac Owner Privileges™ Services are provided up to 5 years/ 100,000 miles (160 000 km), whichever comes first. . In the U.S., anyone driving the vehicle is covered. In Canada, a person driving the vehicle without permission from the owner is not covered. Roadside Assistance is not a part of the New Vehicle Limited Warranty.
12-10 Customer Information Cadillac Technician Roadside Service (U.S. only) Services Not Included in Roadside Assistance Cadillac's exceptional Roadside Service is more than an auto club or towing service. It provides every Cadillac owner in the United States with the advantage of contacting a Cadillac advisor and, where available, a Cadillac trained dealer technician who can provide on-site service. . Impound towing caused by violation of any laws. . Legal fines. .
Customer Information Scheduling Service Appointments Courtesy Transportation Program When your vehicle requires warranty service, contact your dealer/retailer and request an appointment. By scheduling a service appointment and advising your service consultant of your transportation needs, your dealer/ retailer can help minimize your inconvenience.
12-12 Customer Information Public Transportation or Fuel Reimbursement If your vehicle requires warranty repairs, and public transportation is used instead of the dealer's shuttle service, the expense must be supported by original receipts and can only be up to the maximum amount allowed by GM for shuttle service. In addition, for U.S. customers, should you arrange transportation through a friend or relative, limited reimbursement for reasonable fuel expenses may be available.
Customer Information Collision Damage Repair If your vehicle is involved in a collision and it is damaged, have the damage repaired by a qualified technician using the proper equipment and quality replacement parts. Poorly performed collision repairs diminish your vehicle's resale value, and safety performance can be compromised in subsequent collisions.
12-14 Customer Information Insuring Your Vehicle Protect your investment in your GM vehicle with comprehensive and collision insurance coverage. There are significant differences in the quality of coverage afforded by various insurance policy terms. Many insurance policies provide reduced protection to your GM vehicle by limiting compensation for damage repairs by using aftermarket collision parts. Some insurance companies will not specify aftermarket collision parts.
Customer Information Choose a reputable repair facility that uses quality replacement parts. See “Collision Parts” earlier in this section. If the airbag has inflated, see What Will You See After an Airbag Inflates? on page 2‑34. Managing the Vehicle Damage Repair Process In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there.
12-16 Customer Information Owner Information Owner publications are written specifically for owners and intended to provide basic operational information about the vehicle. The owner manual includes the Maintenance Schedule for all models. ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Eastern Time For Credit Card Orders Only (VISA-MasterCard-Discover), visit Helm, Inc. on the World Wide Web at: helminc.
Customer Information However, NHTSA cannot become involved in individual problems between you, your dealer, or General Motors. Reporting Safety Defects to the Canadian Government To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: If you live in Canada, and you believe that your vehicle has a safety defect, notify Transport Canada immediately, in addition to notifying General Motors of Canada Limited.
12-18 Customer Information Vehicle Data Recording and Privacy Your GM vehicle has a number of sophisticated computers that record information about the vehicle’s performance and how it is driven. For example, your vehicle uses computer modules to monitor and control engine and transmission performance, to monitor the conditions for airbag deployment and deploy airbags in a crash and, if so equipped, to provide antilock braking to help the driver control the vehicle.
Customer Information GM will not access this data or share it with others except: with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee; in response to an official request of police or similar government office; as part of GM's defense of litigation through the discovery process; or, as required by law.
12-20 Customer Information 2 NOTES
INDEX A Accessories and Modifications . . . . . . . . . . . . . . . . . . 9-3 Accessory Power . . . . . . . . . . . . . . 8-18 Adaptive Forward Lighting (AFL) . . . . . . . . . . . . . . . . . 5-3 Add-On Electrical Equipment . . . . . . . . . . . . . . . . . . . 8-59 Adding Equipment to the Airbag-Equipped Vehicle . . . . . 2-41 Adjustable Throttle and Brake Pedal . . . . . . . . . . . . . . . . . . 8-16 AdjustmentS Thigh Support . . . . . . . . . . . . . . . . . 2-6 Adjustments Lumbar, Front Seats . . . .
i-2 INDEX B Battery . . . . . . . . . . . . . . . . . . . . . . . . 9-27 Jump Starting . . . . . . . . . . . . . . . 9-101 Voltage and Charging Messages . . . . . . . . . . . . . . . . . . .4-33 Blade Replacement, Wiper . . . . 9-29 Bluetooth . . . . 6-47, 6-48, 6-52, 6-63 Brake Pedal and Adjustable Throttle . . . . . . . . . . . . . . . . . . . . . .8-16 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . 9-24 Antilock . . . . . . . . . . . . . . . . . . . . . . .8-28 Assist . . . . . . . . . . . .
INDEX Cigarette Lighter . . . . . . . . . . . . . . . 4-13 Circuit Breakers . . . . . . . . . . . . . . . 9-44 Cleaning Exterior Care . . . . . . . . . . . . . . . 9-109 Interior Care . . . . . . . . . . . . . . . . .9-113 Climate Control Systems Dual Automatic . . . . . . . . . . . . . . . . 7-1 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Clock . . . . . . . . . . . . . . . . . . . . 4-10, 4-11 Cluster, IP . . . . . . . . . . . . . . . . . . . . . 4-14 Collision Damage Repair . . . . .
i-4 INDEX Driving Better Fuel Economy . . . . . . . . . . 8-2 Characteristics and Towing Tips . . . . . . . . . . . . . . . . .8-50 Defensive . . . . . . . . . . . . . . . . . . . . . . 8-3 Drunk . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Highway Hypnosis . . . . . . . . . . . . . 8-8 Hill and Mountain Roads . . . . . . . 8-8 If the Vehicle is Stuck . . . . . . . . . 8-11 Loss of Control . . . . . . . . . . . . . . . . 8-6 Off-Road Recovery . . . . . . . . . . . . 8-6 Vehicle Load Limits . .
INDEX F Filter Engine Air Cleaner . . . . . . . . . . .9-14 Flash-to-Pass . . . . . . . . . . . . . . . . . . . 5-2 Flashers, Hazard Warning . . . . . . 5-5 Flat Tire . . . . . . . . . . . . . . . . . . . . . . . 9-74 Flat Tire, Changing . . . . . . . . . . . . 9-93 Fluid Automatic Transmission . . . . . .9-13 Brakes . . . . . . . . . . . . . . . . . . . . . . . .9-25 Power Steering . . . . . . . . . . . . . . .9-22 Washer . . . . . . . . . . . . . . . . . . . . . . .9-23 Fog Lamps Front . . . . . . . . .
i-6 INDEX General Information Service and Maintenance . . . . .10-1 Towing . . . . . . . . . . . . . . . . . . . . . . . .8-50 Vehicle Care . . . . . . . . . . . . . . . . . . . 9-2 Glove Box . . . . . . . . . . . . . . . . . . . . . . 3-1 GM Mobility Reimbursement Program . . . . . . . . . . . . . . . . . . . . . . 12-5 H Halogen Bulbs . . . . . . . . . . . . . . . . . 9-34 Hazard Warning Flashers . . . . . . . 5-5 Head Restraints . . . . . . . . . . . . . . . . 2-2 Headlamps . . . . . . . . . . . . . .
INDEX L Labeling, Tire Sidewall . . . . . . . . . 9-53 Lamp Messages . . . . . . . . . . . . . . . 4-37 Lamps Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Courtesy . . . . . . . . . . . . . . . . . . . . . . . 5-6 Daytime Running (DRL) . . . . . . . 5-2 Dome . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Exterior Controls . . . . . . . . . . . . . . . 5-1 Front Fog . . . . . . . . . . . . . . . . . . . . . . 5-5 License Plate . . . . . . . . . . . . . . . . .
i-8 INDEX M Maintenance Records . . . . . . . . . . . . . . . . . . . . . .10-9 Maintenance Schedule Recommended Fluids and Lubricants . . . . . . . . . . . . . . . . . . .10-6 Scheduled Maintenance . . . . . .10-2 Malfunction Indicator Lamp . . . . 4-20 Manual Mode . . . . . . . . . . . . . . . . . . 8-26 Mass Storage Media (MEM) . . . 6-25 Messages Airbag System . . . . . . . . . . . . . . . .4-39 Anti-Theft Alarm System . . . . . .4-39 Battery Voltage and Charging . . . . . . . . . . . . . . . . . . .
INDEX O P Object Detection System Messages . . . . . . . . . . . . . . . . . . . . 4-38 Odometer . . . . . . . . . . . . . . . . . . . . . . 4-15 Off-Road Recovery . . . . . . . . . . . . . . . . . . . . . . 8-6 Oil Engine . . . . . . . . . . . . . . . . . . . . . . . .9-10 Engine Oil Life System . . . . . . .9-12 Messages . . . . . . . . . . . . . . . . . . . .4-36 Pressure Light . . . . . . . . . . . . . . . .4-26 Older Children, Restraints . . . . . 2-43 Online Owner Center . . . . . . . . . .
i-10 INDEX R Radio Frequency Identification (RFID) . . . . . . . . 12-19 Statement . . . . . . . . . . . . . . . . . . 12-19 Radios AM-FM Radio . . . . . . . . . . . . . . . . . 6-11 CD/DVD Player . . . . . . . . . . . . . . .6-21 Reception . . . . . . . . . . . . . . . . . . . .6-18 Satellite . . . . . . . . . . . . . . . . . . . . . . .6-14 Reading Lamps . . . . . . . . . . . . . . . . . 5-6 Rear Axle Limited-Slip . . . . . . . . . . . . . . . . . . .8-35 Rear Climate Control System . . .
INDEX S Safety Belts . . . . . . . . . . . . . . . . . . . 2-13 Care . . . . . . . . . . . . . . . . . . . . . . . . . .2-27 Extender . . . . . . . . . . . . . . . . . . . . . .2-26 How to Wear Safety Belts Properly . . . . . . . . . . . . . . . . . . . . .2-17 Lap-Shoulder Belt . . . . . . . . . . . .2-22 Messages . . . . . . . . . . . . . . . . . . . .4-39 Reminders . . . . . . . . . . . . . . . . . . . .4-17 Replacing After a Crash . . . . . .2-27 Use During Pregnancy . . . . . . . .
i-12 INDEX Starting the Vehicle Messsages . . . . . . . . . . . . . . . . . . . 4-39 Steering . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Fluid, Power . . . . . . . . . . . . . . . . . .9-22 Wheel Adjustment . . . . . . . . . . . . . 4-6 Wheel Controls . . . . . . . . . . . . . . . . 4-6 Storage Mass Media (MEM) . . . . . . . . . . .6-25 Storage Areas Armrest . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Cargo Cover . . . . . . . . . . . . . . . . . . . 3-3 Cargo Management System . . .
INDEX Traction Control System (TCS) . . . . . . . .8-32 Control System (TCS)/ StabiliTrak® Light . . . . . . . . . . . .4-25 Limited-Slip Rear Axle . . . . . . . .8-35 Off Light . . . . . . . . . . . . . . . . . . . . . .4-25 Selective Ride Control . . . . . . . .8-35 Trailer Sway Control (TSC) . . . . . . . . . .8-59 Trailer Towing . . . . . . . . . . . . . . . . . 8-54 Transmission Automatic . . . . . . . . . . . . . . . . . . . . .8-23 Fluid, Automatic . . . . . . . . . . . . . .9-13 Messages . . . . . .
i-14 INDEX Washer Fluid . . . . . . . . . . . . . . . . . . 9-23 Washer Fluid Messages . . . . . . . 4-41 Washer, Headlamps . . . . . . . . . . . 4-10 Wheels Alignment and Tire Balance . . . . . . . . . . . . . . . . . . . . .9-73 Different Size . . . . . . . . . . . . . . . . .9-70 Replacement . . . . . . . . . . . . . . . . .9-73 When It Is Time for New Tires . . . . . . . . . . . . . . . . . . . . . . . . . 9-68 Where to Put the Child Restraint . . . . . . . . . . . . . . . . . . . . . 2-50 Windows . .
