Owner's Manual

Black plate (8,1)
Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012
3-8 Seats and Restraints
Memory Seats
On vehicles with the memory
feature, memory buttons 1 and 2 on
the driver door are used to save and
recall memory settings for the driver
seat cushion and seatback, outside
mirrors, and the steering column
position, if the vehicle is equipped
with the power tilt and telescopic
steering column.
1: Saves and recalls for driver 1.
2: Saves and recalls for driver 2.
B (Exit Button): Moves the driver
seat and/or power steering column
to the exit position. See “Exit Recall”
later in this section.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, outside
mirrors, and the power steering
column, if equipped, to the
desired driving positions.
2. Press and hold “1” until
two beeps sound.
3. Repeat for a second driver
using “2.”
The vehicle comes with two Remote
Keyless Entry (RKE) transmitters.
Each transmitter has a number
“1” or “2” on it. These numbers
correspond to “1” and “2” on the
driver door. The current driver is
identified when
K on the RKE
transmitter is pressed, or when
“1” or “2” on the driver door is
pressed.
To recall memory positions, press
and release “1” or “2.” The vehicle
must be in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission. A single beep will
sound when the button is pressed.
The seat, outside mirrors, and/or
power steering column will move to
the position previously stored for the
identified driver.
Automatic Entry Recall
If entry/exit recall is programmed
on in the vehicle personalization
menu, automatic entry recall occurs
when the ignition is turned on.
See Vehicle Personalization on
page 5‑48.
To stop recall movement,
press one of the power seat,
memory, or outside mirror buttons,
or the power steering column
switch, if equipped.
If something has blocked the
driver seat or the steering column
while recalling a memory position,
the recall may stop. Remove the
obstruction; then press the