Owner`s manual

Black plate (13,1)
Cadillac CTS/CTS-V Navigation System (Europe) - 2013 - CRC - 6/25/12
Infotainment System 13
Additional Information Displayed
.
Press Additional Information
Displayed to turn station or
channel information on or off.
.
Press On to receive FM radio
text information, when it is
available.
.
Press Off to disable this feature.
Number of Preset Pages
Press the Number of Preset Pages
screen button to change the number
of preset pages, 1 through 6. Each
preset page can contain six preset
stations. Press the desired
numbered screen button.
Automatic Volume Control: Bose
equipped vehicles include Bose
AudioPilot® noise compensation
technology.
When turned on, AudioPilot
continuously adjusts the audio
system equalisation, to compensate
for background noise, so that the
music always sounds the same at
the set volume level.
This feature is most effective at
lower volume settings where
background noise can affect how
well the music is heard while being
played through the vehicle's audio
system. At higher volume settings,
where the music is much louder
than the background noise, there
may be little or no adjustments by
AudioPilot. For additional
information on AudioPilot, visit
www.bose.com/audiopilot.
To use AudioPilot®:
1. Press CONFIG to enter the
menu screen, then press
CONFIG repeatedly until Radio
is selected or press the Radio
screen button
2. Press Automatic Volume Control
to access the AudioPilot menu.
3. Press the ON screen button.
To turn off, press OFF.
RDS Settings
Press this screen button to display
the RDS settings screen to
customise various RDS features.
AF (Alternate Frequency): Press
the ON or OFF screen button next
to this feature, to turn this feature on
or off.
With this feature enabled, the audio
system can search for a stronger
station in the network when a
current station gets too weak for
listening. The system will
automatically switch to the station
with the stronger signal.
REG (Region): Press the ON or
OFF screen button next to this
feature, to turn this feature on or off.
With this feature enabled, the RDS
alternate frequency search is
restricted to network stations within
the same region as the current
station.