Owner`s manual

Black plate (30,1)
Cadillac CTS/CTS-V Navigation System (Europe) - 2013 - CRC - 6/25/12
30 Infotainment System
A standard iPod USB cable, like the
one that came with the iPod, cannot
be used to connect an iPod to the
vehicle. The iPod connection cable
that was purchased with the vehicle
or that was made available from
your dealer must be used in order
for this feature to work.
Use the radio
q MENU r /SELECT
knob to bring up the iPod Menu and
select Songs, Artists, Albums and
Playlists to play from the iPod.
The iPod charges while it is
connected to the vehicle and if
the vehicle is turned to ACC/
ACCESSORY or ON/RUN. It can
also be left connected to the vehicle
while the vehicle is turned off or
removed. With the vehicle turned
off, the iPod automatically powers
off and will not charge or draw
power from the vehicle's battery.
If an older iPod model is used that
is not supported or does not have
the special iPod connection cable,
the iPod can still be used in the
vehicle by connecting it to the
Auxiliary Input Jack using a
standard 3.5 mm (1/8 inch) stereo
cable. See “Using the Auxiliary Input
Jack” earlier for more information.
Gracenote Database
When a CDDA is recorded from a
CD to the HDD, the music
information (Album name, Artist
name, Song name and Genre) is
retrieved from the Gracenote
database, stored in the radio. The
database information uses the
information of Gracenote Music
Recognition Service. See the
owner's manual for more information
on the Gracenote Database.
Gracenote Music Recognition
Service, Music recognition
technology, and related data
are provided by Gracenote®.
Gracenote is the industry standard
in music recognition technology
and related content delivery.
For more information, visit
www.gracenote.com.
Updating the Gracenote Database
1. Turn the ignition on.
2. Press the VOL/
O button to turn
the system on.
3. Insert the update disc partway
into the slot, label side up. The
player pulls it in.
4. Update Confirmation screen
displays along with the version
information. Press the Update
screen button.
5. The system reboots and starts
updating the database.
A progress bar displays.
6. The disc automatically ejects
after the update is completed.
The system reboots.