Owner`s manual

Black plate (31,1)
Cadillac CTS/CTS-V Navigation System (Europe) - 2013 - CRC - 6/25/12
Infotainment System 31
Navigation
Using the Navigation
System
This section presents basic
information needed to operate the
navigation system.
Use the buttons on the navigation
system along with the available
screen buttons on the navigation
screen to operate the system. See
Overview on page 3 for more
information.
Once the vehicle is moving, various
functions are disabled to reduce
driver distractions.
Navigation Controls Buttons
The following buttons are on the
navigation system:
VOL/
O (Volume/Power):
1. Press to turn the system on
and off.
2. Turn this knob to increase or
decrease the volume. The
volume works for the feature that
is currently being used; audio,
phone, voice guidance, and
speech recognition changes the
volume of voice prompts.
NAV
n m (Navigation Screen Up/
Down): Press to make the screen
go up and down. In the up position,
all touch-screen buttons can be
viewed or used. In the down
position, a portion of the screen will
be shown that displays the current
audio source and temperature.
! (Dimming Change Button):
The dimming change button on the
navigation faceplate is used to
toggle between these dimming
modes.
NAV (Navigation): Press to view
your vehicle's current position on
the map screen. Each press of this
key cycles through Full Map and the
tab that displays the current audio
source (AM, FM, CD, etc.). Full Map
displays the screen in full map view.
Selecting the audio tab splits the
screen between the map screen and
the current audio source screen
menu. See Configure Menu on
page 48 for more information.
q MENU r SELECT: Turn the
MENU/SELECT knob to highlight a
feature. Press this knob to select
the highlighted feature.
CONFIG (Configure): Press to
adjust features for sound, radio,
navigation, the display, and clock.
See Configure Menu on page 48 for
more information.
RPT (Navigation Repeat): Press
to repeat the last voice guidance
prompt. See Destination on
page 39.
DEST (Destination): Press to
access the Route screen to plan a
destination. If route guidance is
active, press this key to access the
Route screen. See Destination on
page 39 for more information.