2005 Cadillac XLR Owner Manual Seats and Restraint Systems ........................... 1-1 Front Seats ............................................... 1-2 Safety Belts .............................................. 1-5 Child Restraints ....................................... 1-19 Airbag System ......................................... 1-36 Restraint System Check ............................ 1-48 Features and Controls ..................................... 2-1 Keys ............................................
Canadian Owners A French language copy of this manual can be obtained from your dealer or from: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 GENERAL MOTORS, GM, the GM Emblem, CADILLAC, the CADILLAC Crest & Wreath, and the name XLR are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time to the product without notice.
Safety Warnings and Symbols There are a number of safety cautions in this book. We use a box and the word CAUTION to tell about things that could hurt you if you were to ignore the warning. {CAUTION: These mean there is something that could hurt you or other people. In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you do not, you or others could be hurt.
Vehicle Damage Warnings Vehicle Symbols Also, in this manual you will find these notices: The vehicle has components and labels that use symbols instead of text. Symbols are shown along with the text describing the operation or information relating to a specific component, control, message, gage, or indicator. Notice: These mean there is something that could damage your vehicle. A notice tells about something that can damage the vehicle.
These are some examples of symbols that may be found on the vehicle: v
✍ NOTES vi
Section 1 Seats and Restraint Systems Front Seats ......................................................1-2 Power Seats ..................................................1-2 Power Lumbar ...............................................1-2 Heated and Cooled Seats ................................1-3 Power Reclining Seatback ...............................1-4 Safety Belts .....................................................1-5 Safety Belts: They Are for Everyone .................
Front Seats • Slide the control forward or rearward to move the Power Seats • Press the vertical control rearward to recline the entire seat forward or rearward. seatback. Press the vertical control forward to raise the seatback. See Power Reclining Seatback on page 1-4. Power Lumbar The driver’s and passenger’s seatback lumbar support switches are located on the outboard sides of the seats. The power seat controls are located on the outboard sides of both the driver’s and the passenger’s seats.
Use the top lumbar switch to adjust support to the middle seatback and the bottom lumbar switch to adjust support to the lower seatback. Press the front of the switch to increase support and the rear of the switch to decrease support. Keep in mind that as your seating position changes, as it may during long trips, so should the position of your lumbar support. Adjust the seat as needed. Heated and Cooled Seats The buttons for the heated and cooled seats are located on the climate controls.
Power Reclining Seatback The vertical power seat control described earlier allows the seatback to recline. See Power Seats on page 1-2 for more information. {CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can not do their job when you are reclined like this. The shoulder belt can not do its job. In a crash, you could go into it, receiving neck or other injuries. The lap belt can not do its job either.
Safety Belts {CAUTION: Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. {CAUTION: Do not let anyone ride where he or she can not wear a safety belt properly. If you are in a crash and you are not wearing a safety belt, your injuries can be much worse. You can hit things inside the vehicle or be ejected from it. You can be seriously injured or killed.
You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up a person wouldn’t survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away. Without belts they could have been badly hurt or killed. Why Safety Belts Work When you ride in or on anything, you go as fast as it goes.
Put someone on it. Get it up to speed. Then stop the vehicle. The rider doesn’t stop.
The person keeps going until stopped by something. In a real vehicle, it could be the windshield... 1-8 or the instrument panel...
Questions and Answers About Safety Belts Q: Won’t I be trapped in the vehicle after an accident if I’m wearing a safety belt? A: You could be — whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down. And your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.
Q: If I’m a good driver, and I never drive far from home, why should I wear safety belts? A: You may be an excellent driver, but if you’re in an accident — even one that isn’t your fault — you and your passenger can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h).
If the belt is not long enough, see Safety Belt Extender on page 1-18. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 3. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. 4.
The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
Q: What is wrong with this? {CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. A: The shoulder belt is too loose. It will not give nearly as much protection this way.
Q: What is wrong with this? {CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you. A: The belt is buckled in the wrong place.
Q: What is wrong with this? {CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen. A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times.
Q: What is wrong with this? {CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it. A: The belt is twisted across the body.
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
Passenger Position Safety Belt Extender To learn how to wear the passenger’s safety belt properly, see Driver Position on page 1-10. If the vehicle’s safety belt will fasten around you, you should use it. Safety Belt Pretensioners Your vehicle has safety belt pretensioners. They are on the buckle end of the safety belts for the driver and right front passenger. They help the safety belts reduce a person’s forward movement in a moderate to severe frontal and near frontal crash.
Child Restraints Older Children Q: What is the proper way to wear safety belts? A: If possible, an older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash.
Q: What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? A: Move the child toward the center of the vehicle, but be sure that the shoulder belt still is on the child’s shoulder, so that in a crash the child’s upper body would have the restraint that belts provide. {CAUTION: Never do this. Here two children are wearing the same belt. The belt can not properly spread the impact forces.
Infants and Young Children {CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen. That could cause serious or fatal injuries. Everyone in a vehicle needs protection! This includes infants and all other children.
{CAUTION: Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them. Young children and infants need the protection that a child restraint system can provide.
For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer’s instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs.
Child Restraint Systems An infant car bed (A), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous flat surface. Make sure that the infant’s head rests toward the center of the vehicle. 1-24 A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.
A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields. A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a five-point harness. A booster seat can also help a child to see out the window.
Q: How do child restraints work? A: A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner. For many years, add-on child restraints have used the adult belt system in the vehicle. To help reduce the chance of injury, the child also has to be secured within the restraint.
Top Strap {CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the passenger’s airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. Be sure to turn off the airbag before using a rear-facing child restraint in the passenger seat position. Some child restraints have a top strap, or “top tether,” which can help hold the child restraint during a crash.
Lower Anchorages and Top Tethers for Children (LATCH System) Your vehicle has lower anchors at the passenger position that can be used to install a child seat. A label on the seatback shows where each lower anchor is. You can use these lower anchors to install the child seat instead of using the vehicle’s safety belts if the child seat has the necessary attachments. However, your vehicle does not have a third anchor, called a top strap, or tether, anchor.
{CAUTION: If a LATCH-type child restraint is not attached to its anchorage points, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle’s safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. A. Lower Anchorage B.
Securing a Child Restraint Designed for the LATCH System Your vehicle has passenger airbags. There is an airbag off switch in the glove box you can use to turn off the passenger’s airbags. See Airbag Off Switch on page 1-44 for more on this, including important safety information. Your vehicle will either have the Canadian switch design (A) or the United States switch design (B). Unless the passenger’s airbags have been turned off, never put a rear-facing child restraint in this vehicle.
CAUTION: (Continued) CAUTION: We, therefore, recommend that rear-facing child restraints be transported in vehicles with a rear seat that will accommodate a rear-facing child restraint, whenever possible. If you need to secure a forward-facing child restraint in the passenger seat, always move the passenger seat as far back as it will go.
Securing a Child Restraint in the Passenger Seat Position Your vehicle has passenger airbags. There is an airbag off switch in the glove box you can use to turn off the passenger’s airbags. See Airbag Off Switch on page 1-44 for more on this, including important safety information. Your vehicle will either have the Canadian switch design (A) or the United States switch design (B). A. Canadian Switch B.
CAUTION: (Continued) If you need to secure a forward-facing child restraint in the passenger seat, always move the passenger seat as far back as it will go. {CAUTION: If the airbag readiness light ever comes on when you have turned off the airbags, it means that something may be wrong with the airbag system. The passenger’s airbags could inflate even though the switch is off.
4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 1-34 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
If you were using a rear-facing child restraint, turn on the passenger’s airbags when you remove the rear-facing child restraint from the vehicle unless the person who will be sitting there is a member of a passenger airbag risk group. See Airbag Off Switch on page 1-44. {CAUTION: 6. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 7.
Airbag System CAUTION: Your vehicle has four airbags — a frontal airbag for the driver, another frontal airbag for the passenger, a side impact airbag for the driver, and another side impact airbag for the passenger. Frontal airbags are designed to help reduce the risk of injury from the force of an inflating frontal airbag. But these airbags must inflate very quickly to do their job and comply with federal regulations.
{CAUTION: {CAUTION: Both frontal and side impact airbags inflate with great force, faster than the blink of an eye. If you are too close to an inflating airbag, as you would be if you were leaning forward, it could seriously injure you. Safety belts help keep you in position for airbag inflation before and during a crash. Always wear your safety belt, even with frontal airbags. The driver should sit as far back as possible while still maintaining control of the vehicle.
There is an airbag readiness light on the instrument panel, which shows the airbag symbol. Where Are the Airbags? The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See Airbag Readiness Light on page 3-49 for more information. The driver’s frontal airbag is in the middle of the steering wheel.
The passenger’s frontal airbag is in the instrument panel on the passenger’s side. The driver’s side impact airbag is in the side of the driver’s seatback closest to the door.
{CAUTION: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag covering. Do not let seat covers block the inflation path of a side impact airbag.
When Should an Airbag Inflate? The driver’s and right front passenger’s frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes. But they are designed to inflate only if the impact exceeds a predetermined deployment threshold. Deployment thresholds take into account a variety of desired deployment and non-deployment events and are used to predict how severe a crash is likely to be in time for the airbags to inflate and help restrain the occupants.
Vehicles with dual stage airbags are also equipped with seat position sensors which enable the sensing system to monitor the position of the driver’s and passenger’s seats. The seat position sensor provides information which is used to determine if the airbags should deploy at a reduced level or at full deployment. In any particular crash, no one can say whether an airbag should have inflated simply because of the damage to a vehicle or because of what the repair costs were.
What Will You See After an Airbag Inflates? {CAUTION: After the airbag inflates, it quickly deflates, so quickly that some people may not even realize the airbag inflated. Some components of the airbag module — the steering wheel hub for the driver’s airbag, the instrument panel for the passenger’s bag, the side of the seatback closest to the door for the driver’s and passenger’s side impact airbags — will be hot for a short time.
In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the passenger airbag. • Airbags are designed to inflate only once. After an airbag inflates, you will need some new parts for your airbag system. If you do not get them, the airbag system will not be there to help protect you in another crash. A new system will include airbag modules and possibly other parts.
Infant. An infant (less than 1 year old) must ride in the front seat because: • my vehicle has no rear seat; • my vehicle has a rear seat too small to accommodate a rear-facing infant seat; or • the infant has a medical condition which, according to the infant’s physician, makes it necessary for the infant to ride in the front seat so that the driver can constantly monitor the child’s condition. Child age 1 to 12.
United States Canada To turn off the passenger’s airbags, insert your vehicle key into the switch, push in, and move the switch to the off position. The airbag off light on the center console will come on to let you know that the passenger’s airbags are off. The airbag off light will stay on to remind you that the airbags are off. The passenger’s airbags will remain off until you turn them back on again.
Servicing Your Airbag-Equipped Vehicle Airbags affect how your vehicle should be serviced. There are parts of the airbag system in several places around your vehicle. You do not want the system to inflate while someone is working on your vehicle. Your dealer and the service manual have information about servicing your vehicle and the airbag system. To purchase a service manual, see Service Publications Ordering Information on page 8-12.
Restraint System Check Replacing Restraint System Parts After a Crash Checking Your Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces.
If belts are cut or damaged, replace them. Collision damage also may mean you will need to have LATCH system, safety belt or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt or LATCH system was not being used at the time of the collision. If an airbag inflates, you will need to replace airbag system parts. See the part on the airbag system earlier in this section.
✍ NOTES 1-50
Section 2 Features and Controls Keys ...............................................................2-2 Keyless Access System ...................................2-4 Keyless Access System Operation ....................2-5 Doors and Locks .............................................2-9 Door Locks ....................................................2-9 Power Door Locks ........................................2-11 Automatic Door Locks ...................................
Keys {CAUTION: Leaving children unattended in a vehicle is dangerous, but it is even more dangerous if the keyless access transmitter is also left in the vehicle. A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. If they started the engine and moved the shift lever out of PARK (P), that would release the parking brake. Do not leave the keyless access transmitter in a vehicle with children.
There is a key that works the glove box and can open the trunk if vehicle power is lost. See Trunk on page 2-13 for more information. Your vehicle has a keyless access system with pushbutton start. See Ignition Positions on page 2-22 for information on starting the vehicle. Notice: Your vehicle has a number of features that can help prevent theft. You can have a lot of trouble getting into your vehicle if you ever lose your transmitters and/or key. You may even have to damage your vehicle to get in.
Keyless Access System Your vehicle has a Keyless Access System that operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with RSS-210 of Industry Canada.
Keyless Access System Operation Q (Lock): Your vehicle has a Keyless Access System that allows you to lock and unlock your doors, unlock your trunk lid and disarm or arm your theft-deterrent system. The range distance is as much as 100 feet (30 m) away. K (Unlock): Your vehicle comes with two transmitters, and up to four can be matched to your vehicle. See “Matching Transmitter(s) to Your Vehicle” later in this section. Press this button to lock the doors.
Matching Transmitter(s) to Your Vehicle 5. Turn the key five times within five seconds. Each keyless access transmitter is coded to prevent another transmitter from working with your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. Remember to bring any remaining transmitters with you when you go to your dealer. Once your dealer has coded the new transmitter, the lost transmitter will not work with your vehicle.
3. Go to the rear of the vehicle and insert the vehicle key into the key cylinder located on the lower rear fascia on the driver’s side of the vehicle. See Trunk on page 2-13 for more information on the key cylinder. 4. Open the trunk. 5. Turn the key five times within five seconds. 6. The DIC message will display OFF-ACC TO LEARN. 7. Press the ACC button. 13. Press the ACC button. 14. The DIC will read WAIT 10 MINUTES and will count down to zero, one minute at a time. 15.
Battery Replacement Under normal use, the battery in your keyless access transmitter should last about three years. You can tell the battery is weak if the transmitter will not work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it is probably time to change the battery. A weak battery may also cause the DIC to display NO FOBS DETECTED when you try to start the vehicle.
Doors and Locks Door Locks {CAUTION: Unlocked doors can be dangerous. • Passengers — especially children — can easily open the doors and fall out of a moving vehicle. When a door is locked it will not open. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked. So, wear safety belts properly and lock the doors whenever you drive. • Young children who get into unlocked vehicles may be unable to get out.
To open a door from the inside, press the button in front of the door handle and push the door open. If power to the vehicle or the keyless access transmitter is lost, there are two ways to open the door. 2-10 If you are inside the vehicle, use the door release handle located on the floor next to each seat. Pull the handle up to unlock and unlatch the door.
Power Door Locks The power door lock switches are located on the door panels near the windows. If you are outside the vehicle, there is a door release tab in the trunk. The tab is located behind a panel on the driver’s side of the trunk. Pull the handle to unlock and unlatch the driver’s door. See Trunk on page 2-13 for information on opening the trunk during a loss of power. K (Unlock): Press this portion of the button to unlock the doors.
When the lock portion of the button is pressed and the door is closed, a beep will sound and the light will come on for a few seconds, then turn off. If the button is pressed and the door is open, a beep will sound and the light will stay on continuously. When the unlock portion of the button is pressed and the door is closed, a beep will sound and the light will flash twice. When the button is pressed and the door is open, a beep will sound and the light will flash.
Trunk Trunk Lock Release {CAUTION: {CAUTION: It can be dangerous to drive with the trunk lid open because carbon monoxide (CO) gas can come into your vehicle. You cannot see or smell CO. It can cause unconsciousness and even death. If you must drive with the trunk lid open or if electrical wiring or other cable connections must pass through the seal between the body and the trunk lid: • Make sure all other windows are shut.
You can also press the button with the trunk symbol on the keyless access transmitter to open the trunk. To disable this feature, see “Valet Lockout Switch” under Theft-Deterrent Systems on page 2-19. To stop the trunk lid while it is closing, do one of the following: You may passively enter the trunk when you squeeze the trunk release sensor located on the rear of the trunk lid under the emblem, as long as you have your transmitter with you.
If the vehicle has lost battery power, you can still open the trunk using the key. The key cylinder is located behind a cover on the lower rear fascia on the driver’s side of the vehicle. Use the key to pry open the door to access the key cylinder. Emergency Trunk Release Handle Notice: Using the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk may damage it. Use the emergency trunk release handle only to help you open the trunk lid.
Windows {CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Power Window Initialize Power Windows The power window switches are located on each door near the armrest. After a power reconnect such as battery replacement, the express-up and index-up features will not function until the system is initialized. Once power is restored, do the following: 1. Close the door. 2. Raise the window by holding the up arrow on the power window switch. 3. Hold the up arrow for three seconds after the window is closed. Release the switch.
Anti-Pinch Feature Express Window Override If any object is in the path of the window when the express-up is active, the window will stop at the obstruction and auto-reverse to a preset factory position. Weather conditions such as severe icing may also cause the window to auto-reverse. The window will return to normal operation once the obstruction or condition is removed. A condition may exist that causes auto-reversal of the window due to weather or an obstruction.
Theft-Deterrent Systems Arming the System Vehicle theft is big business, especially in some cities. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it impossible to steal. Use one of the three following items listed here to arm the system: Theft-Deterrent System Your vehicle is equipped with a theft-deterrent alarm system. With this system, the security light will flash when the door is open and locked with the power door lock switch.
The theft-deterrent system will not arm if you lock the driver’s door with the power door lock switch after the doors are closed. If your passenger stays in the vehicle when you leave with the keyless access transmitter, have the passenger lock the vehicle after the doors are closed. This way the alarm will not arm, and your passenger will not set it off. Testing the Alarm Do the following to test the system: 1. Make sure the trunk lid is latched. 2. Lower the window on the driver’s door. 3.
Valet Lockout Switch The valet lockout switch is located inside the glove box. Starting and Operating Your Vehicle New Vehicle Break-In Notice: Your vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • Keep your speed at 55 mph (88 km/h) or less for the first 500 miles (805 km). • Do not drive at any one speed — fast or slow — for the first 500 miles (805 km). Do not make full-throttle starts.
Ignition Positions Your vehicle has an electronic keyless ignition with pushbutton start. When the engine is off, press this button to place the vehicle in accessory mode. ACCESSORY MODE ON will display on the Driver Information Center (DIC). This mode allows you to use things like the radio and the windshield wipers while the engine is off. Use ACC if you must have your vehicle in motion while the engine is off, for example, if your vehicle is being pushed or towed.
Starting Your Engine Move your shift lever to PARK (P) or NEUTRAL (N). Your engine will not start in any other position — that is a safety feature. To restart when you are already moving, use NEUTRAL (N) only. The keyless access transmitter must be in the vehicle for the ignition to work. Notice: Do not try to shift to PARK (P) if your vehicle is moving. If you do, you could damage the transmission. Shift to PARK (P) only when your vehicle is stopped. 1.
Engine Coolant Heater Your vehicle may be equipped with an engine coolant heater. In very cold weather, 0°F (−18°C) or colder, the engine coolant heater can help. You will get easier starting and better fuel economy during engine warm-up. Usually, the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle. At temperatures above 32°F (0°C), use of the coolant heater is not required. To Use the Engine Coolant Heater 1. Turn off the engine. 2.
Automatic Transmission Operation {CAUTION: It is dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. Do not leave your vehicle when the engine is running unless you have to. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your vehicle will not move, even when you are on fairly level ground, always set your parking brake and move the shift lever to PARK (P).
REVERSE (R): Use this gear to back up. Notice: Shifting to REVERSE (R) while your vehicle is moving forward could damage the transmission. The repairs would not be covered by your warranty. Shift to REVERSE (R) only after your vehicle is stopped. To rock your vehicle back and forth to get out of snow, ice or sand without damaging your transmission, see If You Are Stuck: In Sand, Mud, Ice or Snow on page 5-29. NEUTRAL (N): In this position, your engine does not connect with the wheels.
Driver Shift Control The driver shift control feature gives you more manual control over the operation of the transmission. To use this feature, move the shift lever from the AUTOMATIC OVERDRIVE (D) position to the left and into the driver shift control gate. The Head-Up Display (HUD) will display the change in gear range, though the actual upshift or downshift may be delayed until the engine speed is correct for the requested gear range.
Some automatic downshifts may occur to maintain minimum engine speed. This will only occur if you leave the vehicle in too high of a gear range for the speed the vehicle is traveling. For example, if you have been driving in fifth gear range and come to a stop without manually downshifting, fifth gear range will continue to display in the HUD. The transmission will automatically downshift to second gear.
When you move out of PARK (P) or NEUTRAL (N) and the engine is running, the parking brake should release. If the parking brake has not been fully released and you try to drive off with the parking brake on, the parking brake indicator light will come on and stay on. If the parking brake does not fully release, you can manually release the pedal. However, be sure to read the following paragraphs: {CAUTION: Always shift to PARK (P) before pulling the manual release lever.
Shifting Into Park (P) {CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your vehicle will not move, even when you are on fairly level ground, use the steps that follow. 1. Hold the brake pedal down with your right foot and set the parking brake. 2.
Torque Lock Shifting Out of Park (P) If you are parking on a hill and you do not shift your transmission into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may find it difficult to pull the shift lever out of PARK (P). This is called “torque lock.” To prevent torque lock, set the parking brake and then shift into PARK (P) properly before you leave the driver’s seat.
Parking Over Things That Burn Engine Exhaust {CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you cannot see or smell. It can cause unconsciousness and death. {CAUTION: You might have exhaust coming in if: • Your exhaust system sounds strange or different. • Your vehicle gets rusty underneath. • Your vehicle was damaged in a collision. • Your vehicle was damaged when driving over high points on the road or over road debris. • Repairs were not done correctly.
Running Your Engine While You Are Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. {CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle. See the earlier caution under Engine Exhaust on page 2-32. Also, idling in a closed-in place can let deadly carbon monoxide (CO) into your vehicle even if the climate control fan is at the highest setting. One place this can happen is a garage.
Mirrors Automatic Dimming Rearview Mirror with OnStar® Outside Power Heated Mirrors The controls for the outside power mirrors are located is on the driver’s door armrest. Your vehicle has an automatic dimming inside rearview mirror. The mirror also contains OnStar® controls. For more information about OnStar®, see OnStar® System on page 2-36. O (On/Off): This button, located on the lower left side of the mirror, is for the automatic dimming functions.
Both mirrors have a heated feature to rid them of snow, ice, or condensation. They will heat when the rear window defogger is turned on. See “Rear Window Defogger” under Dual Climate Control System on page 3-40. If the vehicle has the memory option, the preferred mirror position can be stored. See Memory Seat, Mirrors and Steering Wheel on page 2-54. Both mirrors can be manually folded inward by pulling them toward the vehicle. This feature may be useful when going through a car wash or a confined space.
Outside Convex Mirror {CAUTION: A convex mirror can make things (like other vehicles) look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on your right. Check your inside mirror or glance over your shoulder before changing lanes. The passenger’s side mirror is convex. A convex mirror’s surface is curved so more can be seen from the driver’s seat. It also makes things look farther away than they really are.
OnStar® Services OnStar® Personal Calling The following plan is included on new vehicles for one year from the date of purchase. This OnStar® subscription can be extended for time beyond the first year to meet your needs. For more information, press the OnStar® button to speak with an advisor. As an OnStar® subscriber, the Personal Calling capability is a hands-free wireless phone that is integrated into the vehicle.
HomeLink® Transmitter If your vehicle is equipped with the HomeLink® Transmitter, it complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with RSS-210 of Industry Canada.
Programming the HomeLink® Transmitter Do not use the HomeLink® Transmitter with any garage door opener that does not have the “stop and reverse” feature. This includes any garage door opener model manufactured before April 1, 1982. If you have a newer garage door opener with rolling codes, please be sure to follow Steps 6 through 8 to complete the programming of your HomeLink® Transmitter. Read the instructions completely before attempting to program the HomeLink® Transmitter.
3. Simultaneously press and hold both the desired button on HomeLink® and the hand-held transmitter button. Do not release the buttons until Step 4 has been completed. Some entry gates and garage door openers may require you to substitute Step 3 with the procedure noted in “Gate Operator and Canadian Programming” later in this section. 4. The indicator light will flash slowly at first and then rapidly after HomeLink® successfully receives the frequency signal from the hand-held transmitter.
Gate Operator and Canadian Programming Canadian radio-frequency laws require transmitter signals to “time out” or quit after several seconds of transmission. This may not be long enough for HomeLink® to pick up the signal during programming. Similarly, some U.S. gate operators are manufactured to “time out” in the same manner. Using HomeLink® Press and hold the appropriate HomeLink® button for at least half of a second. The indicator light will come on while the signal is being transmitted.
Reprogramming a Single HomeLink® Button Storage Areas To program a device to HomeLink® using a HomeLink® button previously trained, follow these steps: Glove Box 1. Press and hold the desired HomeLink® button. Do not release the button. 2. The indicator light will begin to flash after 20 seconds. While still holding the HomeLink® button, proceed with Step 2 under “Programming HomeLink® ” shown earlier in this section. Resetting Defaults To reset HomeLink® to default settings do the following: 1.
Map Pocket The map/storage pockets are located on each door behind a cover. Floor Mats Your vehicle’s floor mats are specially designed to remain in position under your feet and out of reach of the accelerator pedal. The driver’s side floor mat is held in place by two snaps and the passenger’s side is held in place by one. How to Remove and Replace the Floor Mats To remove the floor mats, pull up on the rear of the mat to disconnect from the snaps.
Rear Storage Area To install the cargo divider, snap the bottom of the divider onto the snaps (B) located on the floor of the trunk. Then, swing the divider up and place the pins on each side of the divider into the notches (A) on either side of the trunk. There is also a storage compartment located in the trunk on the passenger’s side. To access the storage compartment, unsnap the lid. To reinstall the lid, line up the opening in the lid over the snap and push down into place.
Retractable Hardtop Lowering the Retractable Hardtop The following procedures explain the proper operation of the retractable hardtop. The retractable hardtop will not operate if the valet lockout switch is on. Notice: Leaving the retractable hardtop down and exposing the interior of your vehicle to outdoor conditions may cause damage. Always close the retractable hardtop if leaving your vehicle outdoors.
4. Make sure that nothing or no one is on or around the top. Make sure the trunk cargo cover is in place with nothing on top or in front of the cargo cover. See Rear Storage Area on page 2-44 for more information. Also, make sure the valet lockout switch is off. 5. Push and hold the bottom of the retractable hardtop button located on the console behind the shifter lever. The windows will automatically lower and the top will automatically lower into the storage area.
5. Push and hold the top of the retractable hardtop button located behind the shift lever. The windows will automatically lower and the top will raise. A chime will sound when the top has raised completely. After the top is fully raised, release the retractable hardtop button. If you press the button again within five seconds, the windows will automatically close. If your radio is on, you may notice a brief mute in sound.
Notice: Pressing the retractable hardtop button when the hydraulic pump valve is open could damage the pump. Always close the hydraulic pump valve after the retractable hardtop has been closed manually. 7. Move the rear tonneau rearward and up to the stored position. Pull from the center of the tonneau to keep pressure even. The rubber bumper on each corner will fit against the underside of the trunk decklid. 6. Pull both sides of the rear tonneau over-center link down to unlock the linkage.
8. Push both sides of the rear tonneau over-center link up until they stop to lock the linkage. 9. Close the hydraulic pump valve by turning it clockwise with your hand until it stops. 10. Remove the upright center storage compartment. Use the wrench to remove the four screws holding the storage area in place.
11. Reach behind the square hole and push the front tonneau over-center link up. The front tonneau should pull up easily. If it does not, push the over-center link up more. 2-50 12. Manually move the front tonneau to the open position. Once the front tonneau is open, fold the side wings in by gently pressing them in. Do not force the wings. If they are hard to move, make sure the front tonneau is open all the way.
13. Reach in from the side of the vehicle and under the top to remove the headliner plug. The plug will be located in the center of the top near the front. 14. Insert the wrench into the bolt beneath the plug location. Turn the wrench about one-quarter turn counterclockwise until it stops while gently pulling up on the center of the top to release it. 15. Hold the top in the front and side and lift the top out of the stored position.
16. Hold the top in the front and the rear and lift the top until it is almost closed. Be careful not to pinch your fingers between the rear of the top and the rear window. 2-52 17. Place your hands on the top and guide the top into the closed position.
19. While holding the rear of the top down, insert the wrench into the bolt in the plug opening in the headliner. Turn the wrench counterclockwise until it stops to fully open the latch jaws around the pins. 18. While sitting in the driver’s seat, pull down on the rear of the top. 20. Pull down on the roof with the latch rotated open. Turn the wrench clockwise until it stops to lock the top into position. Push up on the roof.
Vehicle Personalization Memory Seat, Mirrors and Steering Wheel 21. From outside the vehicle, push down on both rear corners of the top to make sure it is completely locked into place. 22. From inside the vehicle, reach behind the headrest and gently pull the wings out a small amount. Then, fold the front tonneau to the closed position. 23. Manually close the trunk. 2-54 Your vehicle is equipped with the memory package.
Use the following steps to program each button: 1. Adjust the driver’s seat including the seatback recliner, lumbar and head restraint, both outside mirrors and the steering wheel to a comfortable position. 2. Press and hold button 1 until two beeps are heard, then release the button.
✍ NOTES 2-56
Section 3 Instrument Panel Instrument Panel Overview ...............................3-4 Hazard Warning Flashers ................................3-6 Other Warning Devices ...................................3-6 Horn .............................................................3-6 Power Tilt Wheel and Telescopic Steering Column ......................................................3-7 Turn Signal/Multifunction Lever .........................3-7 Turn and Lane-Change Signals ........................
Section 3 Instrument Panel Security Light ...............................................3-59 Fog Lamp Light ............................................3-59 Lights On Reminder ......................................3-59 Highbeam On Light .......................................3-59 Fuel Gage ...................................................3-60 Driver Information Center (DIC) .......................3-61 DIC Controls and Displays .............................3-61 DIC Warnings and Messages ................
✍ NOTES 3-3
Instrument Panel Overview 3-4
The main components of the instrument panel are the following: A. Head-Up Display (HUD) Controls/Instrument Panel Brightness Controls. See Head-Up Display (HUD) on page 3-34 or Instrument Panel Brightness on page 3-32. B. Turn Signal/Multifunction Lever. See Turn Signal/Multifunction Lever on page 3-7. C. Instrument Panel Cluster. See Instrument Panel Cluster on page 3-46. D. Windshield Wiper/Washer Lever. See “Windshield Wipers” under Turn Signal/Multifunction Lever on page 3-7. E.
Hazard Warning Flashers Other Warning Devices Your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. If you carry reflective triangles, you can set them up at the side of the road about 300 feet (100 m) behind your vehicle. The hazard warning flasher button is located near the center of the instrument panel.
Power Tilt Wheel and Telescopic Steering Column Turn Signal/Multifunction Lever The power tilt wheel control is located on the outboard side of the steering column. The lever on the left side of the steering column includes the following: • G Turn and Lane-Change Signals. See Turn and To operate the power tilt feature, push the control up and the steering wheel will tilt up. Push the control down and the steering wheel will go down.
Turn and Lane-Change Signals Turn Signal on Chime The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. A chime will remind you if you leave the turn signal on for more than 3/4 mile (1.2 km) of driving. To signal a turn, move the multifunction lever all the way up or down. When the turn is finished, the lever will return automatically.
Flash-to-Pass Windshield Wipers This feature lets you use the high-beam headlamps to signal the driver in front of you that you want to pass. Pull and hold the turn signal lever toward you to use. When you do, the following will occur: • If the low-beam headlamps are on, the high-beam headlamps will turn on. They will stay on as long as you hold the lever there. Release the lever to turn them off. • If the headlamps are on high-beam, they will switch to low-beam.
&(Delay): Move the lever to this position to activate the Rainsense™ function. Adjustments in this region change the sensitivity of the Rainsense™ system. 9(Off): Move the lever to this position to turn off the windshield wipers. 8(Mist): Move the lever all the way down to mist and release for a single wiping cycle. The windshield wipers will stop after one wipe. If you want more wipes, hold the band on mist longer. Heavy snow or ice can overload the wipers.
The Rainsense™ system can be activated by moving the wiper lever up to the delay position and turning the delay adjust band to one of the five sensitivity levels. The bottom delay adjust position is the lowest sensitivity setting, level one. This allows more rain or snow to collect on the windshield between wipes. Turning the delay adjust band away from you to the higher sensitivity levels allows less rain or snow to collect on the windshield between wipes.
Windshield Washer Headlamp Washer K(Washer Fluid): Every fourth time the windshield washer button is pressed, washer fluid will clean the headlamps. The lever on the right side of the steering column also controls the windshield washer. There is a button at the end of the lever. To spray washer fluid on the windshield, press the button and hold it. The washer will spray until you release the button.
+ (Resume/Accelerate): Move the lever to this symbol to make the vehicle accelerate or resume to a previously set speed. T(Set): Press this button to set the speed. With cruise control, you can maintain a speed of about 25 mph (40 km/h) or more without keeping your foot on the accelerator. This can really help on long trips. Cruise control does not work at speeds below about 25 mph (40 km/h). Cruise control will not work if your parking brake is set, or if the master cylinder brake fluid level is low.
Setting Cruise Control Resuming a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake. This, of course, disengages the cruise control. But you don’t need to reset it. {CAUTION: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. 1.
Increasing Speed While Using Cruise Control There are two ways to go to a higher speed: • Use the accelerator pedal to get to the higher speed. Press the set button at the end of the lever, then release the button and the accelerator pedal. You’ll now cruise at the higher speed. If the accelerator pedal is held longer than 60 seconds, cruise control will turn off. • Move the cruise switch from on to resume/accelerate. Hold it there until you get up to the speed you want, and then release the switch.
Ending Cruise Control There are two ways to turn off the cruise control: • Step lightly on the brake pedal • Move the cruise control switch to off Erasing Speed Memory When you turn off the cruise control or the ignition, your cruise control set speed memory is erased. Adaptive Cruise Control If your vehicle has this feature, be sure to read this entire section before using it. The system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada.
{CAUTION: Adaptive Cruise Control will not apply hard braking or bring the vehicle to a complete stop. It will not respond to stopped vehicles, pedestrians or animals. When you are approaching a vehicle or object, Adaptive Cruise Control may not have time to slow your vehicle enough to avoid a collision. Your complete attention is always required while driving and you should be ready to take action and apply the brakes. For more information, see Defensive Driving on page 5-2.
Some of the Adaptive Cruise controls are located on the end of the multifunction lever. Engaging Adaptive Cruise Control With the Set Button {CAUTION: 9 (Off): R (On): This position turns the system off. This position turns the system on. S (Resume/Increase): Push the switch to this symbol to make the vehicle resume to a previously set speed or to increase the set speed when Adaptive Cruise Control is already active.
The set speed is selected by the driver. This is the speed you will travel if there is not a vehicle detected in your path. To set Adaptive Cruise Control, do the following: 1. Make sure the Head-Up Display (HUD) is on and properly adjusted. See Head-Up Display (HUD) on page 3-34 for more information. 2. Move the switch to on. 3. Get up to the speed you want. 4. Press in the set button at the end of the lever and release it. 5. Take your foot off the accelerator pedal.
Increasing Set Speed While Using Adaptive Cruise Control Decreasing Set Speed While Using Adaptive Cruise Control There are two ways to increase the set speed: Press in the set/decrease button on the end of the lever until you reach the lower speed you want, then release it. • Use the accelerator to get to the higher speed. Press the set button at the end of the lever, then release the button and the accelerator pedal. You will now cruise at the higher speed.
Selecting the Follow Distance (GAP) When the system detects a slower moving vehicle, it will adjust your vehicle’s speed and maintain the follow distance (gap) you select. Use the GAP button on the steering wheel to adjust the follow distance. Press the top of the button to increase the distance or the bottom of the button to decrease the distance. The first button press will show you the current follow distance setting on the HUD.
Alerting the Driver The alert symbol will flash on the HUD and a warning beep will sound when driver action is required. Driver action is required when: • Adaptive Cruise Control cannot apply sufficient braking because you are approaching a vehicle too rapidly. • The vehicle speed drops below about 20 mph (32 km/h). • A temporary condition prohibits Adaptive Cruise Control from operating. See DIC Warnings and Messages on page 3-64 for more information. • A malfunction is detected in the system.
Approaching and Following a Vehicle The vehicle ahead symbol will only appear on the HUD when a vehicle ahead is detected in your path. If this symbol does not appear, or disappears briefly, Adaptive Cruise Control will not respond to vehicles you may see ahead. {CAUTION: When the Adaptive Cruise Control radar is blocked by snow, ice, or dirt, it may not detect a vehicle ahead. Adaptive Cruise Control may not have time to slow your vehicle enough to avoid a collision.
Stationary or Very Slow-Moving Objects {CAUTION: Adaptive Cruise Control may not detect and react to stationary or slow-moving vehicles or other objects ahead of you. You could crash into an object ahead of you. Do not use Adaptive Cruise Control when approaching stationary or slow-moving vehicles or other objects. Low-Speed Deactivation If your speed falls below 20 mph (32 km/h) while following a vehicle ahead, Adaptive Cruise Control will begin to disengage.
Curves in the Road {CAUTION: Due to Adaptive Cruise Control limitations in curves, it may respond to a vehicle in another lane, or may not have time to react to a vehicle in your lane. You could crash into a vehicle ahead of you, or lose control of your vehicle. Give extra attention in curves and be ready to use the brakes if necessary. Select an appropriate speed while driving in curves. Adaptive Cruise Control may operate differently in a sharp curve.
Highway Exit Ramps {CAUTION: Adaptive Cruise Control may lose track of the vehicle ahead and accelerate up to your set speed while entering or on highway exit ramps. You could be startled by this acceleration and even lose control of the vehicle. Disengage Adaptive Cruise Control before entering a highway exit ramp. Do not use Adaptive Cruise Control on exit ramps. Adaptive Cruise Control may detect a vehicle that is not in your lane and apply the brakes.
Other Vehicle Lane Changes When going downhill, you may have to brake to keep your speed down. Applying the brake disengages the system. You may choose not to use Adaptive Cruise Control on steep hills. Disengaging Adaptive Cruise Control If another vehicle enters the same lane as you, Adaptive Cruise Control will not detect the vehicle until it is completely in the lane. Be ready to take action and apply the brakes yourself.
Cleaning the System The radar can become blocked by snow, ice or dirt. If so, you may need to turn off the engine and clean the lens. To clean the inside of the fascia lens and radar lens, insert a screwdriver or similar object into one of the small slots on the inboard side of the lens and pop the lens out. Clean the surface with a 50/50 mixture of isopropyl alcohol and water on a dampened cloth. After cleaning the lens, set the lens back in place and press until it snaps in.
The exterior lamp band has four positions: Wiper Activated Headlamps O (Off): Turning the band to this position turns off all lamps. This feature activates the headlamps and parking lamps after the windshield wipers have been in use for approximately six seconds. AUTO (Automatic): Turning the band to this position sets the exterior lamps in automatic mode. AUTO mode will turn the exterior lamps on and off depending on how much light is available outside the vehicle.
Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. DRL can be helpful in many different driving conditions, but they can be especially helpful in the short periods after dawn and before sunset. Fully functional daytime running lamps are required on all vehicles first sold in Canada.
Fog Lamps Twilight Sentinel® Use fog lamps for better vision in foggy or misty conditions. Twilight Sentinel® can turn your lamps on and off for you. A light sensor on top of the instrument panel makes the Twilight Sentinel® work, so be sure it is not covered. The fog lamps control is located on the multifunction lever next to the exterior lamp control. -(Fog Lamps): Turning the band to this position will turn the fog lamps on.
You can idle the vehicle with the lamps off, even when it is dark outside. After starting the vehicle, turn the exterior lamp control band to off, then release it. The lamps will remain off until you turn the control band to off again. Twilight Sentinel® also provides exterior illumination as you leave the vehicle.
Courtesy Lamps Reading Lamps When any door or the trunk lid is opened, the interior lamps will go on unless it is bright outside. Your inside rearview mirror includes two reading lamps. The lamps will go on when a door is opened. When the doors are closed, each lamp can be turned on individually by pressing the button for that lamp. You can also turn on the courtesy lamps by pressing the interior lamp button on the right side of the instrument panel cluster.
Head-Up Display (HUD) {CAUTION: • Check Gages Icon • Adaptive Cruise Control Features and Indicators • Radio Features If the HUD image is too bright, or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view. The Head-Up Display (HUD) allows you to see some of the driver information that appears on your instrument panel cluster.
The HUD controls are located to the left of the steering wheel. To adjust the HUD so you can see it properly, do the following: 1. Adjust the seat to a comfortable driving position. If you change your seat position later, you may have to re-adjust your HUD. 2. Start your engine and press the top or bottom of the HUD button to center the HUD image in your view. The HUD image can only be adjusted up and down, not side-to-side.
As light shines out from the HUD, it is possible for light to shine back in. In rare occurrences, when the sun is at a specific angle and position, the sun’s rays can shine back into the HUD. When this occurs, the display device within the HUD will be temporarily illuminated. The event will end when the vehicle’s angle to the sun changes. Keep in mind that your windshield is part of the HUD system.
Ultrasonic Rear Parking Assist (URPA) Ultrasonic Rear Parking Assist can help you to determine how close an object is to your rear bumper within a given area, making parking easier. The URPA display is located inside the vehicle, below the rear window. It has three color-coded lights that can be seen through the rearview mirror or by turning around. {CAUTION: Even with the Ultrasonic Rear Park Assist system, the driver must check carefully before backing up.
When you shift into REVERSE (R) and an object is detected, the following will occur in sequence depending on the distance from the object: • At 5 feet (1.5 m) a chime will sound and one amber light will be lit; • at 40 inches (1.0 m) both amber lights will be lit; • at 20 inches (0.5 m) a continuous chime will sound and all three lights (amber/amber/red) will be lit; and • at 1 foot (0.3 m) a continuous chime will sound and all three lights (amber/amber/red) will flash.
Notice: When using an accessory power outlet, maximum electrical load must not exceed 20 amps. Always turn off any electrical equipment when not in use. Leaving electrical equipment on for extended periods will drain your vehicle’s battery. Ashtrays and Cigarette Lighter Certain electrical accessories may not be compatible with the accessory power outlet and could result in blown vehicle or adapter fuses. If you experience a problem, see your dealer for additional information on accessory power outlets.
Climate Controls Dual Climate Control System With this system you can control the heating, cooling and ventilation for your vehicle. Automatic Operation AUTO (Automatic): When this button is pressed and the temperature is set, the system will automatically control the inside temperature, the air delivery mode, the air-conditioning compressor and the fan speed. AUTO will appear on the display. 1. Press the AUTO button.
3. Wait for the system to regulate. This may take from 10 to 30 minutes. Then adjust the temperature, if necessary. You can switch from English to metric units through the Driver Information Center (DIC). See DIC Controls and Displays on page 3-61 for more information. The air-conditioning system removes moisture from the air, so you may sometimes notice a small amount of water dripping underneath your vehicle while idling or after turning off the engine. This is normal.
ªN« (Mode): Pressing the switch and changing the mode cancels automatic operation and places the system in manual mode. Press the AUTO button to return to automatic operation. To change the current mode, select one of the following: H (Vent): This mode directs air to the instrument panel outlets. % (Bi-Level): This mode directs approximately half of the air to the instrument panel outlets, and then directs most of the remaining air to the floor outlets.
Sensors There are sensors to measure the temperature and sun’s effect on passenger comfort. The solar sensor on your vehicle monitors the solar radiation then uses the information to maintain the selected temperature when operating in AUTO mode by initiating needed adjustments to the temperature, the fan speed and the air delivery system. The system may also supply cooler air to the side of the vehicle facing the sun. The recirculation mode will also be activated, as necessary.
Defogging and Defrosting Rear Window Defogger Fog on the inside of windows is a result of high humidity (moisture) condensing on the cool window glass. This can be minimized if the climate control system is used properly. There are two modes to clear fog or frost from your windshield. Use the floor/defog mode to clear the windows of fog or moisture and warm the passengers. Use defrost to remove fog or frost from the windshield more quickly.
Outlet Adjustment Passenger Compartment Air Filter Use the thumbwheel to open or close the outlets. The passenger compartment air filter removes certain odor and particles from the air including pollen and dust particles. Reductions in airflow, which may occur more often in dusty areas, indicate that the filter may need to be replaced early. Operation Tips • Clear away any ice, snow or leaves from the air inlets at the base of the windshield that may block the flow of air into your vehicle.
Warning Lights, Gages, and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to your warning lights and gages could also save you or others from injury. Warning lights come on when there may be or is a problem with one of your vehicle’s functions.
United States shown, Canada similar 3-47
Speedometer and Odometer Tachometer Your speedometer lets you see your speed in either miles per hour (mph) or kilometers per hour (km/h). The tachometer displays the engine speed in thousands of revolutions per minute (rpm). There is only one scale for mph and km/h. Use the Driver Information Center (DIC) controls to switch between mph and km/h. See DIC Controls and Displays on page 3-61 for more information. The cluster will calculate the proper speed and move the needle to the correct position.
Airbag Readiness Light There is an airbag readiness light on the instrument panel, which shows a deployed airbag symbol. The system checks the airbag’s electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the airbag modules, the wiring and the diagnostic module. For more information on the airbag system, see Airbag System on page 1-36. This light will come on when you start your vehicle, and it will flash for a few seconds.
Airbag Off Light {CAUTION: If the passenger’s airbags are turned off for a person who is not in a risk group identified by the national government, that person will not have the extra protection of the airbags. In a crash, the airbags would not be able to inflate and help protect the person sitting there. Do not turn off the passenger’s airbags unless the person sitting there is in a risk group. See Airbag Off Switch on page 1-44 for more on this, including important safety information.
Voltmeter Gage {CAUTION: If the airbag readiness light ever comes on when you have turned off the airbags, it means that something may be wrong with the airbag system. The passenger’s airbags could inflate even though the switch is off. If this ever happens, do not let anyone whom the national government has identified as a member of a passenger airbag risk group sit in the passenger’s position (for example, do not secure a rear-facing child restraint in your vehicle) until you have your vehicle serviced.
Brake System Warning Light Your vehicle’s hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop you. For good braking, though, you need both parts working well. If the light comes on while you are driving and you have a LOW BRAKE FLUID message showing on the DIC, pull off the road and stop carefully. You may notice that the pedal is harder to push. Or, the pedal may go closer to the floor. It may take longer to stop.
Anti-Lock Brake System Warning Light With the anti-lock brake system, the light will come on when your engine is started and may stay on for several seconds. That is normal. Traction Control System (TCS) Warning Light This light should come on briefly as you start the engine. If the light does not come on then, have it fixed so it will be ready to warn you if there is a problem. If the light stays on, turn the ignition off.
You can acknowledge this message by pressing the RESET button. When the SERVICE STABILITRAK message is displayed, the StabiliTrak® system will not assist you in controlling the vehicle. You should have the system serviced as soon as possible. Adjust your driving accordingly. Engine Coolant Temperature Gage When the system is working, you will see the STABILITRAK ACTIVE message displayed in the DIC. You may also feel of hear the system working. This is normal.
Tire Pressure Light This light should come on briefly as you start the engine. It will then come on only when a flat or low tire pressure condition exists. See Tire Pressure Monitor System on page 6-55 for more information. Malfunction Indicator Lamp Check Engine Light Your vehicle is equipped with a computer which monitors operation of the fuel, ignition, and emission control systems. life of the vehicle, helping to produce a cleaner environment.
This light should come on briefly, as a check to show you it is working, as you start the engine. If the light does not come on, have it repaired. This light will also come on during a malfunction in one of two ways: • Light Flashing — A misfire condition has been detected. A misfire increases vehicle emissions and may damage the emission control system on your vehicle. Diagnosis and service may be required. • Light On Steady — An emission control system malfunction has been detected on your vehicle.
You may notice this as stalling after start-up, stalling when you put the vehicle into gear, misfiring, hesitation on acceleration, or stumbling on acceleration. (These conditions may go away once the engine is warmed up.) This will be detected by the system and cause the light to turn on. If you experience one or more of these conditions, change the fuel brand you use. It will require at least one full tank of the proper fuel to turn the light off.
Engine Oil Pressure Gage {CAUTION: Do not keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches fire. You or others could be burned. Check your oil as soon as possible and have your vehicle serviced. United States Canada The engine oil pressure gage shows the engine oil pressure in psi (pounds per square inch) or kPa (kilopascals) when the engine is running. Oil pressure should be 20 to 80 psi (140 to 550 kPa).
Security Light Lights On Reminder For information regarding this light, see Theft-Deterrent Systems on page 2-19. This light comes on whenever the headlamps are on. United States Only Fog Lamp Light Highbeam On Light The fog lamps light will come on when the fog lamps are in use. The light will go out when the fog lamps are turned off. See Fog Lamps on page 3-31 for more information. This light will illuminate when the headlamp high beams are in use. See Headlamp High/Low-Beam Changer on page 3-8.
Fuel Gage Your fuel gage tells you about how much fuel you have left when the ignition is on. Here are five things that some owners ask about. All these things are normal and do not indicate that anything is wrong with the fuel gage. • At the gas station, the gas pump shuts off before the gage reads the full symbol. • It takes more (or less) fuel to fill up than the gage reads. For example, the gage reads half full, but it took more (or less) than half of the tank’s capacity to fit it.
You can use the Driver Information Center (DIC) to display more detailed fuel information. While scrolling through the DIC, you will also find: • AVERAGE XX.X MPG (Average Miles Per Gallon): The fuel economy calculated for the last 20 gallons (76 L) of fuel used, or since you last reset the display. • INST XX.X MPG (Instantaneous Miles Per Gallon): The fuel economy calculated for your current driving conditions.
+ (Interior Lamps): Press this button to turn the interior lamps on and off. OPTIONS: Press this button to choose personal options that are available on your vehicle. RESET: Press this button to reset a feature. It is also used to switch between English and Metric options. Use the information button to scroll through the following options: ODOMETER: This feature shows how far the vehicle has been driven in either miles or kilometers. Use the ENG/METRIC feature to switch between English and Metric units.
ELAPSED TIME: This feature is like a stopwatch, in that you can clock the time it takes to get from one point to another. To operate, press the information button to display ELAPSED TIME. Each of the fields for the hours, minutes and seconds are two numeric digits. Once ELAPSED TIME 00:00:00 is displayed, press the RESET button to start the timing feature. Press the RESET button again to stop it.
DIC Warnings and Messages These messages will appear if there is a problem sensed in one of your vehicle’s systems. You must then press RESET to clear the display screen for further use. However, be sure to take any message that appears on the display screen seriously and remember that pressing the RESET button will only make the message disappear, not the problem. DIC messages can also be displayed in English, French, German, Italian and Spanish.
COOLANT OVER TEMP: This message will appear when the engine coolant temperature is too hot. Stop and allow your vehicle to idle in PARK (P) until it cools down and the message is removed. Do not increase engine speed above a normal idle. If it does not cool down, turn off the engine and have it serviced by your GM dealer before driving it again. Severe engine damage can result from an overheated engine. See Engine Overheating on page 6-23.
HIGH VOLTAGE: This message shows that the electrical charging system is overcharging. To avoid being stranded, have the electrical system checked by your GM dealer. You can reduce the charging overload by using the accessories. Turn on the lamps and radio, set the climate control on AUTO and the fan speed on HI, and turn the rear window defogger on. You can monitor battery voltage on the DIC by pressing the information button. The normal range is 11.5 to 15.5 volts when the engine is running.
LOW OIL PRESSURE: If this message appears while the engine is running, stop the engine and do not operate it until the cause of low oil pressure is corrected. Severe damage to the engine can result. A multiple chime will sound when this message is displayed. LOW VOLTAGE: This message will appear when the electrical system is charging less than 10 volts or if the battery has been drained. If this message appears immediately after starting, it is possible that the generator can still recharge the battery.
NO FOB, OFF OR RUN?: This message is displayed when you turn off the engine, but the vehicle does not detect a keyless access transmitter in the vehicle. The vehicle will remain in accessory mode until the engine has been turned off or started, or five minutes has expired. If you select OFF, the vehicle cannot be started again without a remote access transmitter in the vehicle. OVER SPEED WARNING: This message is displayed when the vehicle speed exceeds a certain limit as required by some export countries.
SERVICE ELECT SYSTEM: This message will display if an electrical problem has occurred within the Powertrain Control Module (PCM). Have your vehicle serviced by your GM dealer. SERVICE FUEL SYSTEM: The Powertrain Control Module (PCM) has detected a problem within the fuel system when this message appears. Have your vehicle serviced by your GM dealer. This message will also be displayed when the cluster is not getting fuel information from the PCM.
STABILITRAK ACTIVE: You may see the STABILITRAK ACTIVE message on the Driver Information Center. It means that an advanced, computer-controlled system has come on to help your vehicle continue to go in the direction in which you are steering. This stability enhancement system activates when the computer senses that your vehicle is just starting to spin, as it might if you hit a patch of ice or other slippery spot on the road.
TOP INOP – VALET ON: This message will display when the retractable hardtop button is pressed and the valet switch is on. Turn off the valet switch before using the retractable hardtop. TRAC/STABILITRAK OFF: This message indicates that both the Traction Control System (TCS) and StabiliTrak® are off. The message will remain until the systems are turned on again. TOP INOP OUT OF PARK: This message will display if the retractable hardtop button is pressed while the vehicle is not in PARK (P).
Other Messages • LEFT FRONT TIRE FLAT MAX SPD 55, REDUCED HNDLG Here are more messages that you can receive on your Driver Information Center (DIC). To acknowledge a message and read another message that may have come on at the same time, press the RESET button. • ACCESSORY MODE ON • CHANGE OIL SOON (See Engine Oil on page 6-13 and Engine Oil Life System on page 6-16.
DIC Vehicle Personalization Your vehicle is equipped with personalization capabilities that allows you to program certain features to a preferred setting for up to two drivers. The back of the keyless access transmitters are labelled 1 or 2. The current driver’s preferences are recalled when one of the following occurs: • The lock or unlock button on the keyless access transmitter, programmed as 1 or 2, is pressed. • The appropriate memory button, 1 or 2, located on the driver’s seat is pressed.
Auto Recall Approach Lights This feature allows the steering column, outside mirrors and the driver’s seat to automatically move to the current driver’s set position when the engine starts. The DIC will display AUTO RECALL OFF or AUTO RECALL ON. Press the OPTIONS button to change the setting.
Flash at Unlock FOB Reminder This feature activates the front and rear turn signals for two short flashes when the unlock or trunk button on the keyless access transmitter is pressed or when OnStar® unlocks the doors. This will only occur when the vehicle is off. This feature sounds the horn three times when the driver door is closed and there is a keyless access transmitter inside the interior of the vehicle. This will only occur when the vehicle is off.
You can select to not have the horn sound when the passive lock occurs. If you choose this setting, the doors will automatically lock eight seconds after you turn the ignition off, remove the keyless access transmitter from the interior of the vehicle and close both doors. You can also select to have the horn sound once when the passive lock occurs.
Park Assist This feature tilts the passenger’s side mirror downward when the shifter is moved to REVERSE (R). This can help you to see the curb while backing up. If you adjust the mirror while in REVERSE (R), the new position will be saved as the park assist position. The DIC will display PARK ASSIST OFF or PARK ASSIST ON. Language This feature allows you to select the language the DIC and Head-Up Display (HUD), uses to display messages.
Audio System(s) Theft-Deterrent Feature Notice: Before adding any sound equipment to your vehicle, like a tape player, CB radio, mobile telephone, or two-way radio, make sure that it can be added by checking with your dealer. Also, check federal rules covering mobile radio and telephone units. If sound equipment can be added, it is very important to do it properly. Added sound equipment may interfere with the operation of your vehicle’s engine, radio, or other systems, and even damage them.
Audio Steering Wheel Controls + SEEK: Press this button to go to the next radio station and stay there. The radio will only seek stations with a strong signal that are in the selected band. When a CD is playing, press this button to go to the next track. If this button is pressed more than once, the player will continue moving forward through the CD. > (Mute): Press this button to silence the system. Press this button again, or any other radio button, to turn the sound on.
Radio Reception Cellular Phone Usage AM Cellular phone usage may cause interference with your vehicle’s radio. This interference may occur when making or receiving phone calls, charging the phone’s battery, or simply having the phone on. This interference is an increased level of static while listening to the radio. If static is received while listening to the radio, unplug the cellular phone and turn it off. The range for most AM stations is greater than for FM, especially at night.
Diversity Antenna System The AM-FM antennas are located under the decklid surface in the trunk compartment. the antennas are hidden from view and are not accessible. If adding an aftermarket cellular telephone to your vehicle, do not attach the antenna to the rear glass. This would interfere with the convertible top retraction operation and could cause damage to the finished/painted surfaces. XM™ Satellite Radio Antenna System The XM™ Satellite Radio antenna is located on the trunk of your vehicle.
✍ NOTES 3-82
Section 4 Navigation System Overview .........................................................4-2 Navigation System Overview ............................4-2 Getting Started ...............................................4-4 Features and Controls ......................................4-4 Using the Navigation System ...........................4-4 Setup Menu ...................................................4-7 Plan Route ..................................................4-13 Edit Memory Point .............
Overview Navigation System Overview 4-2
A. BAND Key. See “Finding a Station” under Navigation Audio System on page 4-45. B. CD Key. See Navigation Audio System on page 4-45 or CD/DVD Player on page 4-63. C. DVD Key. See “Playing a DVD” under CD/DVD Player on page 4-63. D. TUNE/SEEK Key. See “Playing the Radio” under Navigation Audio System on page 4-45. E. Audio/Adjust Key. See “Main Audio Menu” under Navigation Audio System on page 4-45. F. Power-Volume Knob. See “Hard Keys” under Using the Navigation System on page 4-4. G.
Getting Started Before you begin to operate the navigation system, read this manual thoroughly to become familiar with it and to understand how the system works. The navigation system allows you to do the following: • Plan a route with provided turn-by-turn route and map guidance with voice prompts. See Plan Route on page 4-13 for more information. • Select a destination using various methods and choices. When getting started, you may set the navigation system to your preference using various options.
Hard Keys The following hard keys are located to the left of the navigation screen: BAND: Press the BAND key to access the band screen and switch between AM, FM1, FM2, XM1, XM2, and WX, if equipped. See “Finding a Station” under Navigation Audio System on page 4-45. CD: Press the CD key to play a CD. The CD screen will be displayed. See Six-Disc CD Changer on page 4-61 or CD/DVD Player on page 4-63. DVD: Press the DVD key to play a DVD. The DVD screen will be displayed. See CD/DVD Player on page 4-63.
ROUTE: Press the ROUTE key to display the PLAN ROUTE menu. See Plan Route on page 4-13. V: MENU: Press the MENU key to display the SETUP MENU. See Setup Menu on page 4-7. To make your name selections easier, the system will only allow you to select a character which can follow the last one entered. For example, if you enter Z, you would not be allowed to follow it with T. The system will highlight the available characters and darken the unavailable characters.
Setup Menu Navigation Settings MENU: Press the MENU key located to the right of the navigation screen to access the SETUP MENU. This menu allows you to change the following options for the navigation system. The SETUP MENU allows you to adjust such things as map appearance, navigation settings, and voice guidance volume. Restore Default Settings This feature will automatically reset the system to the default values. To restore the default settings, do the following: 1.
System Configuration This feature allows you to reconfigure the navigation system. If you begin to drive your vehicle during this procedure, the system will not be able to adjust the position or direction of your vehicle. Touch the System Configuration screen button to view the following choices: Adjust Vehicle Position: To correct the position of your vehicle on the map or to change vehicle position, do the following: 1. Touch the Adjust Vehicle Position screen button.
Quick POI (Point of Interest) Selection Setting the Quick POI menu This menu allows you to choose a point of interest (POI), such as gas stations, restaurants, hotels, etc. to be displayed on the map screen. You can also set a destination to a specific POI. To set the Quick POI list displayed on the map screen, do the following: 1. Select the category you would like to replace. 2. Select a Quick POI category from the Quick POI selection menu list.
Removing Quick POI Icons To remove POI icons from the map screen, do the following: 1. Touch the map screen once. 2. Touch the POI OFF screen button. The current POI icons will be removed from the map screen. Setting a Destination Using Quick POI This feature will allow you to choose a POI as your destination. To set a destination using a POI, do the following: 1. Touch the POI icon on the map screen that you wish to set as a destination.
Guidance Appearance This menu allows you to set the guidance appearance screen options. This screen is displayed on the map while on a planned route. The current settings will appear as light blue. Turn List: Select this feature to have the guidance screen display several upcoming turns. Directional arrows, street name, and distance to the next turn will be displayed. As you approach the next turn, the system will display a closer view of the upcoming maneuver.
Map Appearance This menu allows you to set the map appearance screen options. The current setting will appear as light blue. Set 3D Viewing Angle: This feature allows you to adjust the 3D viewing angle. To do so, do the following: 1. Touch 3D on the MAP APPEARANCE menu. 2. Touch Set 3D Viewing Angle. The map screen with the 3D viewing angle bar will be displayed. 3. Touch the up or down arrows to set the viewing angle. 4.
Plan Route Edit Memory Point To plan a route, press the ROUTE key. The PLAN ROUTE menu will be displayed. This feature allows you to store, delete, and edit memory points. Touch the Edit Memory Point screen button from the PLAN ROUTE menu to access the EDIT MEMORY POINT screen. You may use one of several destination entry methods to plan a route. See Enter Destination on page 4-21 for more information.
A total of 60 locations can be stored. The last 10 destinations entered will be stored under Previous Destination. In addition, one memory point can be stored under the Home category. Editing Memory Points If all 60 stored points are entered, the system will notify you that there is no available storage left in memory points. A memory point must be removed before storing additional memory points. Icon Editing of a Memory Point Registering Memory Points To store a memory point, do the following: 1.
Name Editing of a Memory Point Adjusting a Memory Point To modify the name of a stored memory point, do the following: To relocate a memory point’s location, do the following: 1. Select the category of the memory point. 1. Select the category of the memory point. 2. Select the memory point you want to edit. 2. Select the item you want to edit. 3. Touch POSITION. A map screen with the position of this memory point will appear. 3. Touch the NAME screen button and use the alpha keypad to edit the name.
Deleting Single Memory Points Edit Category To delete a single memory point, do the following: To edit the name of a category, do the following: 1. Press the ROUTE key. 1. Press the ROUTE key. 2. Touch EDIT MEMORY POINT. 2. Touch EDIT MEMORY POINT. 3. Select the category of the memory point. 4. Touch DELETE. 5. Select the memory point you want to delete. A confirmation window will appear. 6. Touch YES to delete the memory point or NO to return to the previous menu. 7.
Previous Destination Memory Edit Waypoint Each time you select Start from the map screen, that destination will be stored as a memory point under PREVIOUS DESTINATION. This category will store up to 10 destinations. Waypoints are destinations you can set along the way to your final destination. This feature allows you to add, edit, and delete waypoints.
Adding a Waypoint To add a waypoint to your route, do the following: 1. Touch Add Waypoint. 2. Enter a destination. See Enter Destination on page 4-21. A map will appear showing the location of the waypoint. 3. Touch Enter to add your waypoint. 4. Touch the ADD screen button to insert the waypoint in the desired order. 5. The system will display the ROUTE INFORMATION screen. From this screen, several options are available.
Delete: Touch Delete to delete a waypoint or the final destination. A confirmation window will appear. Touch YES to delete the point or NO to return to the previous screen. Editing a Waypoint Delete All: Touch Delete All to delete all of the waypoints and the final destination. A confirmation window will appear. Touch YES to delete all waypoints or NO to return to the previous screen. 1. Touch Edit Waypoint. Change: Touch Change to change the final destination. Enter a destination.
Edit Avoid Point/Area Registering an Avoid Point/Area From this menu you can register, edit, and delete an area to be avoided while planning a route. These areas can also be saved so the system can automatically avoid them when planning a route. To store an avoid point/area, do the following: 1. Touch Register Avoid Point/Area. 2. Enter a location. See Enter Destination on page 4-21. 3.
Editing an Avoid Point/Area Enter Destination To edit an avoid point/area, do the following: The DESTINATION menu will give you several ways to plan a route. Touch the Enter Destination screen button from the PLAN ROUTE menu to display the DESTINATION menu. 1. Touch Edit Avoid Point/Area. A list of avoided points will appear. 2. Select the avoided point/area you want to change. A map of the avoided area will appear. 3. Use REDUCE or ENLARGE to edit the avoided point. 4.
To enter a destination, choose from one of the destination entry methods following in this section. After entering a destination, If available, the system will display up to three routes in a pop-up window indicating the total mileage and time to destination for each route. Select a route by touching NEXT. The map will display each route in a different color. The selected route will be highlighted in red.
3. Touch the map screen continuously to scroll through the map faster. The address of the location on the map will appear at the top of the screen. If needed, use the zoom feature to locate your destination. See “Map Scales” under Maps on page 4-33 for more information. Address This destination entry method allows you to input an address by providing the system with a house number, street name, and city. Select Street to begin entering the desired address. 4.
2. Touch List to view name choices or continue to spell the street name to further reduce the number of available items. 3. Once the street name has been selected, enter the house number using the numeric keypad. The system will list the house number range that is available for the street. 4. When you have finished entering the house number, touch Enter. If the house number and street address you entered exists in more than one city on the DVD database, a list of cities will appear.
You may search for a POI using the following three methods: • Touch NAME to type in a POI by name using the alpha key pad. As you type in a name, the system will search for an available match to your input. Select the desired POI. • Select a POI by touching CATEGORY. Use the arrows to scroll through the categories listed. Select a category along with any appropriate sub-categories. If the list of available POIs for the selected category is too long, you may need to enter the POI’s name or city.
Memory Points This destination entry method allows you to set a memory point as your destination. Each time you store a destination from the map screen, the destination is stored under MARKED POINT. See Edit Memory Point on page 4-13 for more information. To select a destination using this entry method, do the following: 1. Touch the Memory Points symbol. 2. Select a category. 3. Select a destination. Use the arrows to scroll through the memory points. They can be sorted by date, name, distance, and icon.
Previous Destination Previous Starting Point This destination entry method allows you to select a destination by choosing from a list of the last 10 destinations entered into the system. This destination entry method allows you to select the last start point as your destination. To select the previous start point as your destination, do the following: 1. Touch Previous Destination. 2. Touch the Previous starting point screen button. 3. Touch Enter to plan your route.
Home Set by Map This destination entry method allows you to select a destination that has been previously stored as Home. This destination entry method allows you to select a destination by using the scroll symbol. To choose Home as your destination, do the following: 1. Touch the Home symbol. 2. Touch Enter to plan your route. To use this feature, do the following: 1. Touch the Set By Map symbol. Current vehicle position will be shown on the map screen. 2.
Freeway Entrance/Exit This destination entry method allows you to select either a freeway entrance or an exit as a destination. Freeways are also referred to by their abbreviated names. For example, Interstate 75 in the U.S. is selected by entering I-75. As you enter a freeway name, the List option will become available. 3. Touch List to view the list of available name choices or continue to spell the name to further reduce the list of available items.
Intersection This destination entry method allows you to select a destination by inputting the intersecting roads you wish to travel to. 3. To view a list of choices, touch List or continue to spell the name to further reduce the list of available items. The system will display a list of the intersecting streets if the number of intersecting streets is five or less. 4. Select the first street. 5. Now enter the second street name. 6. Select the second street name from the list of intersecting streets.
Route Preference Detour To change your planning options, use the following instructions. This feature allows you to choose a distance in miles/kilometers to detour. Select the detour distance desired for residential roads and freeways. 1. Press the ROUTE key. 2. Touch Route Preference. The following options will be available from the ROUTE PREFERENCE menu: The system will retain these settings for the next time you use Detour, unless you change them.
Route Setting This feature allows you to display and change the planning methods used each time you plan a route. With planning method options, you are able to select the fastest route based on time or distance, using only major roads, toll roads, and using ferries based on the navigation system’s information and information contained on the map DVD. Use Major Roads: Choose Yes to calculate the best route using only major roads unless a route cannot be found without the use of a secondary road.
Display Whole Route Regional Maps This feature allows you to display your entire planned route. Total mileage and time to destination for the planned route will be displayed on the map screen. Touch Return to go back to the previous menu. The maps are stored on a DVD-ROM. The 48 contiguous United States and portions of Canada are contained on one disc. The U.S. map database includes interstate freeways, state highways, country roads, and major and general streets.
4. Load the map DVD into the slot by inserting it partway. The system will pull it in. 5. Press and release the TILT key to close the faceplate. Notice: Shifting out of PARK (P) with the system’s faceplate open will cause the faceplate to close automatically. This could cause damage to a CD, DVD or the system if it is partially loaded. Before shifting out of PARK (P), make sure that the DVD or CD is loaded properly. The vehicle must be shifted back into PARK (P) to close the faceplate.
Map Adjustments The system allows you to adjust the scale of view on the map. The map will scroll automatically based on the direction you are traveling. Map Scales To view a larger or smaller scale of the map, touch the map scale arrows. 4. Select the desired region by touching the appropriate screen button to the left of the U.S. map. The name of the states or the country included in the selected region will be displayed at the bottom of the screen and the region will be highlighted. 5.
Scrolling the Map Symbols Touch anywhere on the map screen twice to display the scroll symbol. The following symbols are the most common that appear on a map screen. Your vehicle is shown as this symbol. It indicates the current position and heading direction of your vehicle on the map. Place your finger on the map screen in any direction outside of the scroll symbol to scroll in that direction. The map will continue to scroll until you remove your finger.
You will see this type of symbol on the map when a waypoint has been planned. This symbol indicates the distance and estimated travel time to your final destination. The Estimated Travel Time feature must be on for estimated travel time to be displayed. The waypoint symbol will be numbered from 1 through 5 depending on how many waypoints have been set. See Edit Waypoint on page 4-17 for more information on adding waypoints. This symbol indicates the distance to your final destination.
This symbol indicates the map with North up. While in North up mode, North will always be at the top of the map screen regardless of which direction the vehicle is traveling. This symbol indicates the map with the vehicle travel direction up, or Heading up. The shaded triangle indicates North. While in Heading up mode, the direction your vehicle is traveling will always be at the top of the map screen. Touch either the North Up heading symbol or the vehicle Heading Up symbol to alternate between settings.
This symbol indicates the position of the next turn instruction. With these options, you can do the following: While on a planned route, touch this symbol to display the DEST MAP, WHOLE, and TURN LIST options. Dest (Destination) Map: This option allows you to view the final destination location. The destination’s name or address will be displayed on the map screen. Touch Return when finished.
Whole: This option allows you to view the entire planned route. The distance to destination will be displayed on the map screen. Touch Return when finished. Turn List: This option allows you to view a step-by-step listing of upcoming street names, the distance that you will travel on the road, and turns you will need to make during your planned route. After touching Turn List, the system may take some time to create the list.
The turn list will read from bottom to top. The bottom street name is the street you are currently on. The system automatically updates this screen as you make each turn. You may also touch the scroll up and down arrows providing scroll is available. Touching the down arrow will bring you to your current location. Touching the up arrow will give you upcoming streets. At times, there may not be names available for entrance or exit ramps. To avoid a turn, touch AVOID next to the turn you want to avoid.
If you do not want to use the first method, keep your currently selected search area region and enter your destination. This method allows you only to select a destination from the easy planning route method or from the All Points of Interest (POI) categories with the “All Search Areas” comment for US Only. For example, Tourist is a category that features this comment. See Enter Destination on page 4-21 for more information.
This system may not be available/or interferences may occur if any of the following are true: • Signal are obstructed by tall buildings, large trucks, or a tunnels. • Satellites are being repaired or improved. • Objects are located on the rear shelf. • After-market glass tinting has been applied to the vehicle’s windows. Notice: Do not apply after-market glass tinting to the vehicle’s windows.
• The vehicle is repeating a change of direction by going forward and backward, or turning on a turn table in a parking lot. • The vehicle is entering and/or exiting a parking lot or garage with a roof. • The vehicle has a roof carrier, ski, or bike rack installed on it. • • • • • • The vehicle has tire chains on it. The tires have been replaced. The tire pressure is incorrect. The tires are worn. The battery is disconnected.
If the System Needs Service Navigation Audio System If you are still experiencing difficulty with your navigation system after reading this information, see your dealer for assistance. Notice: Before adding any sound equipment to your vehicle, like a tape player, CB radio, mobile telephone, or two-way radio, make sure that it can be added by checking with your dealer. Also, check federal rules covering mobile radio and telephone units.
Main Audio Menu e/ z (Audio/Adjust): Press this key to view the main audio screen. Preset Selection: Here you can program the audio system’s presets to recall your home settings by touching HOME. You can also recall the presets you use when traveling to another area by touching AWAY. See “Preset Station Menu” later in this section for more information on how to store preset stations. The Home and Away feature is not available for the XM™ Satellite Radio source, if equipped.
Display Presets on the Map: With this feature on, your audio system presets for the current audio source will be displayed on the left of the map screen. Touch ON to turn this feature on. You may also choose to turn this feature off. With this feature on, you can recall your preset radio stations from the map screen. You cannot store preset stations from the map screen. You must do this from the audio screen. See “Preset Station Menu” later in this section for more information on storing presets.
Clock Adjust Menu GPS TIME: The current GPS time will be displayed to the right of this screen button. Touch GPS TIME to set the navigation system time to match current GPS time. If the seconds for the present minute are greater than thirty when GPS TIME is selected, the clock will round up to the next minute. Daylight Saving Time: Touch this screen button to increase the time setting by one hour. Then touch GPS TIME to save the new setting.
Screen Adjust Menu !(Brightness): Touch the plus (+) or minus (−) signs to adjust the brightness of the screen. You will see the screen change. Touch SET to confirm the setting. AUTO: This setting automatically adjusts the contrast and brightness of the screen depending on exterior lighting conditions. DAY: This setting leaves the screen in day mode. Day mode is best suited for daylight conditions. NIGHT: This setting leaves the screen in night mode. Night mode is best suited for nighttime conditions.
Language Finding a Station Your vehicle has been set for the English language. If you wish to change the language, you must do so through the Driver Information Center (DIC). See Driver Information Center (DIC) on page 3-61 for more information. If the language is changed from English, a majority of the voice guidance prompts and screen text will change to the selected language. Remember, the menu screens will not match word-for-word as they appear in this manual.
Preset Station Menu Up to 36 stations, 6 AM, 6 FM 1, 6 FM 2, 6 XM 1, 6 XM 2, and 6 WX, if equipped, can be programmed for home and for away. To store presets, do the following: 1. Turn the audio system on. 2. Touch AM, FM, XM, or WX, if equipped, to display the desired source. The preset station menu will appear. 3. Tune to the desired station by using the TUNE/SEEK arrows. 4. Touch SOUND to set the bass, mid-range, treble, and DSP for your preset, if desired.
Sound Menu To adjust sound settings, do the following: 1. Touch the plus (+) or minus (−) signs to adjust treble, mid-range, and bass. 2. Touch the L for left or R for right to adjust the balance of the speakers. 3. Touch the F for front or R for rear to adjust the fade of the speakers. 4. Touch DSP to adjust your DSP, if equipped. See “Adjusting the Speakers” later in this section for more information. After adjustments are made, touch any source screen button.
To adjust the tone for each preset, do the following: Adjusting the Speakers 1. Press the BAND key. 2. Touch AM, FM1, FM2, XM1, XM2, or WX, if equipped, to access the desired preset screen. 3. Touch SOUND. 4. Touch the plus (+) or minus (−) signs to adjust treble, mid-range, and bass. 5. Touch Return to exit. This will take you to the preset station menu. 6. Touch and hold one of the six preset screen buttons for more than two seconds until you hear a beep.
Touch DSP to change the following options: Radio Data Systems (RDS) ON/OFF: Touch ON/OFF to turn DSP on and off. DRIVER SEAT: Touch this button to adjust the audio to give the driver the best possible sound quality. TALK: TALK makes spoken words sound very clear. Touch this button when listening to non-musical material such as news, talk shows, and sports broadcasts. SPACIOUS: Touch this button to make the listening space seem larger. SOUND: Touch SOUND to access the Sound menu.
RDS: Touch RDS to use alternate RDS functions located in the preset menu. When you touch RDS, you will only have about five seconds to choose RDS ON/OFF, TA, MSG, PTY, or SEL PTY. If you do not make a selection, the system will return to the previous menu. If you are tuned to a station broadcasting RDS information, the station’s Program Service (PS) and Program Type (PTY) will replace the station’s frequency on the status line at the top of the display.
MSG (Message): When RDS is on, if the current station has a message, MSG will appear on the display. Touch MSG from the preset menu to view the message. If the whole message does not appear on the display, parts of the message will appear every three seconds until the message is completed. Once the complete message has been displayed, MSG will disappear from the display until another new message is received. MSG will remain available to allow you to display the entire message again.
Once you have stored a PTY for each of your preset stations, you can recall a PTY preset by touching the preset station for less than two seconds. Then use TUNE/SEEK or SCAN to locate a station for that PTY selection. ALERT: This type of announcement warns of national or local emergencies. You will not be able to turn off alert announcements. Alert announcements will come on even if RDS mode is turned off. ALERT appears on the display when an alert announcement plays.
INFO (Information): Touch INFO while in XM™ mode to retrieve various pieces of information related to the current song or channel. By touching INFO, you may retrieve four different categories of information: Artist Name/Feature, Song/Program Title, Channel Category, and other Additional Information that may be broadcast on that channel. Additional Information messages may only be available at certain times or on certain programs.
XM Radio Messages Radio Display Message Condition Action Required XM Updating Updating encryption code The encryption code in your receiver is being updated, and no action is required. This process should take no longer than 30 seconds. No XM Signal Loss of signal Your system is functioning correctly, but you are in a location that is blocking the XM signal. When you move into an open area, the signal should return.
Radio Display Message Condition Action Required Not Found No channel available for the chosen category There are no channels available for the category you selected. Your system is working properly. No Information No Text/Informational message available No text or informational messages are available at this time on this channel. Your system is working properly. XM Theftlocked Theft lock active The XM receiver in your vehicle may have previously been in another vehicle.
Six-Disc CD Changer With the compact disc changer, you can play up to six normal size discs continuously. When the radio is turned on, the changer will begin checking for discs. This will continue for up to one and a half minutes, depending on the number of discs loaded. You may hear noise, but this is normal. The CD changer is initializing. Press the CD hard key to access the six-disc CD changer screen. You can also use the system’s DVD player for single CD play once the map DVD is removed.
The following features are also available from this screen: • • • • LOAD EJECT SCAN THE DISCS or SCAN THE TRACKS and RANDOM ALL or RANDOM DISC. The numbered buttons (1 through 6) represent the order of the discs loaded in the changer. If there are only two CDs loaded, buttons 1 and 2 will only be available to choose from. LOAD: Touch this button once each time you wish to load a CD into the changer.
[ (Forward): Touch this button to fast forward quickly through a track selection. «TUNE SEEK ª: Press the up arrow on the TUNE/ SEEK switch to seek to the next selection on the compact disc. If playing last track of disc, pressing the up arrow will seek to the first track of the next disc. Press the down arrow to seek to the previous selection on the compact disc. If playing the first track of disc, pressing the down arrow will seek to the last track on the selected disc.
CD Player To use the player as a single music CD player, you must first remove the navigation map DVD. While playing a CD in the CD/DVD Player, the navigation system is not available. The message “The disc installed is not a map DVD” will appear on the display if any of the navigation hard keys are pressed. Notice: Shifting out of PARK (P) with the system’s faceplate open will cause the faceplate to close automatically. This could cause damage to a CD, DVD or the system if it is partially loaded.
r (Play): Touch this button to begin playing a CD. RANDOM: Touch this button to hear the tracks in random, rather than sequential, order on the disc. Touch RANDOM again to turn off random mode. SCAN TRACKS: Touch this button to hear the first 10 seconds of each track on the disc. Touch this button again to stop scanning. The CD will mute while scanning. REPEAT TRACK: Touch this button to repeat the selected track. r (Rewind): Touch this button to rewind quickly through a track selection.
3. Load the video DVD into the slot. The system will pull the DVD into the player. 4. Press and release the TILT hard key to close the faceplate. DVD Menu Options To display the menu choices while a DVD is playing, touch anywhere on the screen and the menu will appear. Notice: Shifting out of PARK (P) with the system’s faceplate open will cause the faceplate to close automatically. This could cause damage to a CD, DVD or the system if it is partially loaded.
VIEWING ANGLE: Touch this button to adjust the viewing angle of the DVD. Some DVDs allow you to change the camera angle. This may not be available on all DVDs. Depending on the type of DVD you are using, this button may or may not be available. SUBTITLE: Touch this button to playback the video with subtitles. This may not be available on all DVDs. Depending on the type of DVD you are using, this button may or may not be available.
SETTING: Touch this button to adjust the following: • LANGUAGE PREFERENCES • PARENTAL LOCK Under LANGUAGE PREFERENCES, you can select different languages for AUDIO, SUBTITLE and DVD MENUS. 1. To change languages, first select the option you wish to change. SEARCH: Touch this button to search to a certain scene on the DVD. Depending on the type of DVD you are using, this button may or may not be available. r (Rewind): Touch this button to rewind through a scene during playback.
Radio Personalization with Home and Away Feature With this feature, you can recall the latest audio system settings as adjusted the last time your vehicle was operated. This feature allows two different drivers to store and recall their own audio system settings. The settings recalled by the audio system are determined by which RKE transmitter (1 or 2) was used to enter the vehicle. The number on the back of the RKE transmitter corresponds to driver 1 or to driver 2.
To use navigation voice recognition, do the following: 1. Press the talk symbol steering wheel control and release it when you hear a beep. The audio system, if on, will mute. The system will only recognize commands spoken in English. Voice Recognition Commands The following list shows all of the voice commands available for the navigation system with a brief description of each. To use the voice commands, refer to the instructions listed previously. Help Commands 2.
Radio Commands Radio: This command will change the audio system to the next radio audio source. AM: This command will change the audio system to the AM audio source. Seek Up: This command will cause the selected audio source to seek up to the next strongest signal. Seek Down: This command will cause the selected audio source to seek down to the next strongest signal. Stop Scan: This command will cause the audio source to stop scanning for the next strongest signal.
Position Commands Current Position, Current Location, Show Current Position, Show Current Location: These commands will cause the system to display the vehicle’s current location on the map screen. Map: This command will cause the system to display the map screen. Map Commands North Up, Change to North Up: These commands will cause the system to display the North Up heading when on the map screen if the map scale is set to 2 miles (4 km) or less.
Guidance Commands Repeat Guidance, Repeat Voice: These commands will cause the system to repeat the last available voice prompt guidance command if a destination has been set. Louder: This command will cause the system to increase the volume of the navigation voice prompts if a destination has been set. Softer: This command will cause the system to decrease the volume of the navigation voice prompts if a destination has been set.
First Waypoint Map: This command will cause the system to display the map view of the first waypoint location if one has been set. Second Waypoint Map: This command will cause the system to display the map view of the second waypoint location if more than one waypoint has been set. Third Waypoint Map: This command will cause the system to display the map view of the third waypoint location if more than two waypoints have been set.
Japanese Restaurant, Japanese Food: These commands will cause the system to display Japanese restaurant POI icons. Mexican Restaurant, Mexican Food: These commands will cause the system to display Mexican restaurant POI icons. Seafood Restaurant, Seafood: These commands will cause the system to display Seafood restaurant POI icons. Rental Car Agency: This command will cause the system to display rental car POI icons.
Tourist Attraction: This command will cause the system to display tourist attraction POI icons. Train Station: This command will cause the system to display train station POI icons. Winery: This command will cause the system to display winery POI icons. Airport: This command will cause the system to display airport POI icons. City Hall: This command will cause the system to display city hall POI icons. Bus Station: This command will cause the system to display bus station POI icons.
Bank: This command will cause the system to display bank POI icons. Business Facility: This command will cause the system to display business facility POI icons. School: This command will cause the system to display school POI icons. City Center: This command will cause the system to display city center POI icons. ATM: This command will cause the system to display ATM POI icons. POI Off: This command will cause the system to turn off POIs so they do not appear on the map screen.
✍ NOTES 4-78
Section 5 Driving Your Vehicle Your Driving, the Road, and Your Vehicle ..........5-2 Defensive Driving ...........................................5-2 Drunken Driving .............................................5-2 Control of a Vehicle ........................................5-5 Braking .........................................................5-5 Anti-Lock Brake System (ABS) .........................5-6 Braking in Emergencies ...................................5-8 Traction Control System (TCS) ..........
Your Driving, the Road, and Your Vehicle Defensive Driving reading, or reaching for something on the floor — makes proper defensive driving more difficult and can even cause a collision, with resulting injury. Ask a passenger to help do things like this, or pull off the road in a safe place to do them yourself. These simple defensive driving techniques could save your life. The best advice anyone can give about driving is: Drive defensively.
Many adults — by some estimates, nearly half the adult population — choose never to drink alcohol, so they never drive after drinking. For persons under 21, it is against the law in every U.S. state to drink alcohol. There are good medical, psychological and developmental reasons for these laws. The person would reach the same BAC by drinking three 4 ounce (120 ml) glasses of wine or three mixed drinks if each had 1-1/2 ounces (45 ml) of liquors like whiskey, gin, or vodka.
There is a gender difference, too. Women generally have a lower relative percentage of body water than men. Since alcohol is carried in body water, this means that a woman generally will reach a higher BAC level than a man of her same body weight will when each has the same number of drinks. The law in most U.S. states, and throughout Canada, sets the legal limit at 0.08 percent. In some other countries, the limit is even lower. For example, it is 0.05 percent in both France and Germany.
Braking {CAUTION: Drinking and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affected by even a small amount of alcohol. You can have a serious — or even fatal — collision if you drive after drinking. Please do not drink and drive or ride with a driver who has been drinking. Ride home in a cab; or if you are with a group, designate a driver who will not drink. Control of a Vehicle You have three systems that make your vehicle go where you want it to go.
Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is a mistake. Your brakes may not have time to cool between hard stops. Your brakes will wear out much faster if you do a lot of heavy braking. If you keep pace with the traffic and allow realistic following distances, you will eliminate a lot of unnecessary braking. That means better braking and longer brake life.
Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here is what happens with ABS: A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each wheel. The anti-lock system can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions.
Using Anti-Lock Do not pump the brakes. Just hold the brake pedal down firmly and let anti-lock work for you. You may hear a motor or clicking noise and feel the brake pedal move a little during a stop, but this is normal. Braking in Emergencies With anti-lock, you can steer and brake at the same time. In many emergencies, steering can help you more than even the very best braking.
To turn the system off, press the front part of the traction control button located on the center console. Magnetic Ride Control Magnetic Ride Control automatically adjusts the ride of your vehicle. Automatic ride control is achieved through a computer used to control and monitor the suspension system. The controller receives input from various sensors to determine the proper system response. If the controller detects a problem within the system, the DIC will display a SERVICE RIDE CONTROL message.
StabiliTrak® System The StabiliTrak® System is a computer controlled system that helps the driver maintain directional control of the vehicle in difficult driving conditions. This is accomplished by selectively applying any one of the vehicle’s brakes.
To turn the system off, press and hold the front part of the traction control button on the console for five seconds with the vehicle stopped. You can turn the system back on at any time by pressing the button. The DIC will display the appropriate message when you push the button, either TRAC/STABILITRAK ON or TRAC/STABILITRAK OFF. Steering Power Steering If you lose power steering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort.
The traction you can get in a curve depends on the condition of your tires and the road surface, the angle at which the curve is banked, and your speed. While you are in a curve, speed is the one factor you can control. Suppose you are steering through a sharp curve. Then you suddenly accelerate. Both control systems — steering and acceleration — have to do their work where the tires meet the road. Adding the sudden acceleration can demand too much of those places. You can lose control.
Off-Road Recovery You may find that your right wheels have dropped off the edge of a road onto the shoulder while you’re driving. An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand. But you have to act fast, steer quickly, and just as quickly straighten the wheel once you have avoided the object.
Passing The driver of a vehicle about to pass another on a two-lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again. A simple maneuver? Not necessarily! Passing another vehicle on a two-lane highway is a potentially dangerous move, since the passing vehicle occupies the same lane as oncoming traffic for several seconds.
• Check your mirrors, glance over your shoulder, and start your left lane change signal before moving out of the right lane to pass. When you are far enough ahead of the passed vehicle to see its front in your inside mirror, activate your right lane change signal and move back into the right lane. Remember that your right outside mirror is convex. The vehicle you just passed may seem to be farther away from you than it really is. • Try not to pass more than one vehicle at a time on two-lane roads.
Remember: Any traction control system helps avoid only the acceleration skid. If your traction control system is off, then an acceleration skid is also best handled by easing your foot off the accelerator pedal. Driving at Night If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go. If you start steering quickly enough, your vehicle may straighten out. Always be ready for a second skid if it occurs.
Here are some tips on night driving. • Drive defensively. • Do not drink and drive. • Adjust your inside rearview mirror to reduce the glare from headlamps behind you. • Since you cannot see as well, you may need to slow down and keep more space between you and other vehicles. • Slow down, especially on higher speed roads. Your headlamps can light up only so much road ahead. • In remote areas, watch for animals. • If you are tired, pull off the road in a safe place and rest.
Driving in Rain and on Wet Roads The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good shape, a heavy rain can make it harder to see road signs and traffic signals, pavement markings, the edge of the road, and even people walking. It is wise to keep your windshield wiping equipment in good shape and keep your windshield washer tank filled with washer fluid.
Hydroplaning Hydroplaning is dangerous. So much water can build up under your tires that they can actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road. Hydroplaning does not happen often. But it can if your tires do not have much tread or if the pressure in one or more is low. It can happen if a lot of water is standing on the road.
City Driving Here are ways to increase your safety in city driving: • Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip. • Try to use the freeways that rim and crisscross most large cities. You will save time and energy. See Freeway Driving on page 5-21. • Treat a green light as a warning signal. A traffic light is there because the corner is busy enough to need it.
Freeway Driving The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving. Too-fast or too-slow driving breaks a smooth traffic flow. Treat the left lane on a freeway as a passing lane. At the entrance, there is usually a ramp that leads to the freeway. If you have a clear view of the freeway as you drive along the entrance ramp, you should begin to check traffic.
Once you are moving on the freeway, make certain you allow a reasonable following distance. Expect to move slightly slower at night. When you want to leave the freeway, move to the proper lane well in advance. If you miss your exit, do not, under any circumstances, stop and back up. Drive on to the next exit. The exit ramp can be curved, sometimes quite sharply. The exit speed is usually posted. Reduce your speed according to your speedometer, not to your sense of motion.
Highway Hypnosis Hill and Mountain Roads Is there actually such a condition as highway hypnosis? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. {CAUTION: • Keep your vehicle in good shape. Check all fluid Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous. Your brakes will have to do all the work of slowing down. They could get so hot that they would not work well. You would then have poor braking or even none going down a hill. You could crash.
Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You may want to put winter emergency supplies in your vehicle. Also see Tires on page 6-46. Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth, and a couple of reflective warning triangles.
Driving On Snow or Ice Most of the time, those places where your tires meet the road probably have good traction. However, if there is snow or ice between your tires and the road, you can have a very slippery situation. You will have a lot less traction, or grip, and will need to be very careful. What is the worst time for this? Wet ice. Very cold snow or ice can be slick and hard to drive on. 5-26 But wet ice can be even more trouble because it may offer the least traction of all.
Your anti-lock brakes improve your vehicle’s stability when you make a hard stop on a slippery road. Even though you have the anti-lock braking system, you will want to begin stopping sooner than you would on dry pavement. See Anti-Lock Brake System (ABS) on page 5-6. • Allow greater following distance on any slippery road. • Watch for slippery spots. The road might be fine until you hit a spot that is covered with ice.
{CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle. Clear away snow from around the base of your vehicle, especially any that is blocking your exhaust pipe. And check around again from time to time to be sure snow does not collect there. You can run the engine to keep warm, but be careful.
Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again and repeat this only when you feel really uncomfortable from the cold. But do it as little as possible. Preserve the fuel as long as you can. To help keep warm, you can get out of the vehicle and do some fairly vigorous exercises every half hour or so until help comes.
Rocking Your Vehicle to Get It Out Loading Your Vehicle First, turn your steering wheel left and right. That will clear the area around your front wheels. Turn your traction control system off; see Traction Control System (TCS) on page 5-8. Then shift back and forth between REVERSE (R) and a forward gear, spinning the wheels as little as possible. Release the accelerator pedal while you shift, and press lightly on the accelerator pedal when the transmission is in gear.
Tire and Loading Information Label The Tire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 6-46 and Inflation - Tire Pressure on page 6-53. There is also important loading information on the vehicle Certification label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axle.
4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 − 750 (5 x 150) = 650 lbs). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6.
Example 2 Item A B C Description Vehicle Capacity Weight for Example 2 = Subtract Occupant Weight @ 150 lbs (68 kg) x 2 = Available Cargo Weight = Example 3 Total Item 400 lbs (181 kg) A 300 lbs (136 kg) B 100 lbs (45 kg) C Description Vehicle Capacity Weight for Example 3 = Subtract Occupant Weight @ 200 lbs (91 kg) x 2 = Available Cargo Weight = Total 400 lbs (181 kg) 400 lbs (181 kg) 0 lbs (0 kg) Refer to your vehicle’s tire and loading information label for specific information about your ve
Certification Label {CAUTION: Do not load your vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). If you do, parts on your vehicle can break, and it can change the way your vehicle handles. These could cause you to lose control and crash. Also, overloading can shorten the life of your vehicle. A vehicle specific Certification label is attached to the rear edge of the driver’s door.
Towing {CAUTION: Towing Your Vehicle Things you put inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. • Put things in the rear area of your vehicle. Try to spread the weight evenly. • Never stack heavier things, like suitcases, inside the vehicle so that some of them are above the tops of the seats. • Do not leave an unsecured child restraint in your vehicle. • When you carry something inside the vehicle, secure it whenever you can.
✍ NOTES 5-36
Section 6 Service and Appearance Care Service ............................................................6-3 Doing Your Own Service Work .........................6-4 Adding Equipment to the Outside of Your Vehicle ......................................................6-5 Fuel ................................................................6-5 Gasoline Octane ............................................6-5 Gasoline Specifications ....................................6-5 California Fuel ....................
Section 6 Service and Appearance Care Appearance Care ............................................6-70 Fabric/Carpet ...............................................6-70 Vinyl ...........................................................6-72 Leather .......................................................6-72 Instrument Panel ..........................................6-72 Interior Plastic Components ............................6-72 Wood Panels ...............................................
Service Your dealer knows your vehicle best and wants you to be happy with it. We hope you will go to your dealer for all your service needs. You will get genuine GM parts and GM-trained and supported service people. We hope you will want to keep your GM vehicle all GM.
Doing Your Own Service Work If you want to do some of your own service work, you will want to use the proper service manual. It tells you much more about how to service your vehicle than this manual can. To order the proper service manual, see Service Publications Ordering Information on page 8-12. Your vehicle has an airbag system. Before attempting to do your own service work, see Servicing Your Airbag-Equipped Vehicle on page 1-47.
Adding Equipment to the Outside of Your Vehicle Gasoline Specifications Fuel It is recommended that gasoline meet specifications which were developed by automobile manufacturers around the world and contained in the World-Wide Fuel Charter which is available from the Alliance of Automobile Manufacturers at www.autoalliance.org/fuel_charter.htm. Gasoline meeting these specifications could provide improved driveability and emission control system performance compared to other gasoline.
Additives To provide cleaner air, all gasolines in the United States are now required to contain additives that will help prevent engine and fuel system deposits from forming, allowing your emission control system to work properly. In most cases, you should not have to add anything to your fuel. However, some gasolines contain only the minimum amount of additive required to meet U.S. Environmental Protection Agency regulations.
Filling Your Tank {CAUTION: Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling. Do not smoke if you are near fuel or refueling your vehicle. Keep sparks, flames and smoking materials away from fuel. Do not leave the fuel pump unattended when refueling your vehicle — this is against the law in some places.
The fuel door release button is located on the left side of the instrument panel. The button only works when the vehicle is in PARK (P) or NEUTRAL (N) and the valet lockout button is in OFF. An alternate fuel door release is located inside the trunk behind a panel on the driver’s side of the vehicle. Pull the handle to release the fuel door. To remove the fuel cap, turn it slowly to the left (counterclockwise).
{CAUTION: {CAUTION: If you spill fuel and then something ignites it, you could be badly burned. Fuel can spray out on you if you open the fuel cap too quickly. This spray can happen if your tank is nearly full, and is more likely in hot weather. Open the fuel cap slowly and wait for any hiss noise to stop. Then unscrew the cap all the way. If a fire starts while you are refueling, do not remove the nozzle. Shut off the flow of fuel by shutting off the pump or by notifying the station attendant.
Filling a Portable Fuel Container Checking Things Under the Hood {CAUTION: Never fill a portable fuel container while it is in your vehicle. Static electricity discharge from the container can ignite the gasoline vapor. You can be badly burned and your vehicle damaged if this occurs. To help avoid injury to you and others: • Dispense gasoline only into approved containers. • Do not fill a container while it is inside a vehicle, in a vehicle’s trunk, pickup bed or on any surface other than the ground.
Hood Release To lift the hood, use the following steps: 1. Pull the lever inside the vehicle to open the hood. It is located on the lower left side of the instrument panel. 2. Then go to the front of the vehicle and find the secondary hood release lever. The lever is located under the hood near the center of the vehicle. Move the release lever to the right and raise the hood. Before closing the hood, be sure all filler caps are on properly. Then pull the hood down and close it firmly.
Engine Compartment Overview When you open the hood, here is what you will see: 6-12
A. Battery. See Battery on page 6-36. B. Passenger Compartment Air Filter. See Passenger Compartment Air Filter on page 3-45. C. Underhood Fuse Block. See Underhood Fuse Block on page 6-83. D. Power Steering Fluid. See Power Steering Fluid on page 6-31. E. Engine Air Cleaner/Filter. See Engine Air Cleaner/Filter on page 6-18. F. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 6-13. G. Engine Oil Dipstick. See “Checking Engine Oil” under Engine Oil on page 6-13. H.
See Engine Compartment Overview on page 6-12 for the location of the engine oil fill cap. When to Add Engine Oil If the oil is at or below the cross-hatched area at the tip of the dipstick, then you will need to add at least one quart of oil. But you must use the right kind. This section explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and Specifications on page 6-85. Notice: Do not add too much oil.
• SAE 5W-30 As shown in the viscosity chart, SAE 5W-30 is best for your vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. Oils meeting these requirements should also have the starburst symbol on the container. This symbol indicates that the oil has been certified by the American Petroleum Institute (API).
Substitute Engine Oil: When adding oil to maintain engine oil level, oil meeting GM Standard GM4718M may not be available. You can add substitute oil designated SAE 5W-30 with the starburst symbol at all temperatures. Substitute oil not meeting GM Standard GM4718M should not be used for an oil change. Engine Oil Additives Do not add anything to your oil. The recommended oils with the starburst symbol that meet GM Standard GM4718M are all you will need for good performance and engine protection.
How to Reset the Engine Oil Life System and the Oil Life Indicator The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL NOW message in the DIC being turned on, reset the system. After the oil has been changed, the CHANGE OIL NOW message and the oil life indicator must be reset.
Engine Air Cleaner/Filter To inspect or replace the filters, do the following: See Engine Compartment Overview on page 6-12 for the location of the engine air cleaner/filters. When to Inspect the Engine Air Cleaner/Filters Inspect the air cleaner/filters at the Maintenance II intervals and replace at the first oil change after 50,000 miles (83 000 km). See Scheduled Maintenance on page 7-4 for more information. If you are driving in dusty/dirty conditions, inspect the filters at each engine oil change.
4. Inspect or replace the filter. 5. Repeat the procedure for the second air cleaner/filter. Follow these steps to reinstall the covers to the engine air cleaner/filter housings: 1. Align the four tabs located on the back of the cover with the three slots on the back of the housing. 2. Push the cover slightly down and towards the engine to engage the tabs in the slots and align the two wing screws. 3. Engage and tighten the two clasps on the top of the engine air cleaner/filter cover.
Automatic Transmission Fluid How to Check It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to your dealer service department and have it repaired as soon as possible. There is a special procedure for checking and changing the transmission fluid. Because this procedure is difficult, you should have this done at your dealer service department.
A 50/50 mixture of clean, drinkable water and DEX-COOL® coolant will: • • • • • Giving freezing protection down to −34°F (−37°C). Give boiling protection up to 265°F (129°C). Protect against rust and corrosion. Help keep the proper engine temperature. Let the warning lights and gages work as they should. Notice: Using coolant other than DEX-COOL® may cause premature engine, heater core or radiator corrosion.
Checking Coolant {CAUTION: Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. Never turn the surge tank pressure cap — even a little — when the engine and radiator are hot. The engine coolant surge tank is located toward the rear of the engine compartment on the driver’s side of the vehicle. For more information on location, see Engine Compartment Overview on page 6-12. 6-22 The vehicle must be on a level surface.
Adding Coolant If you need more coolant, add the proper DEX-COOL® coolant mixture at the surge tank, but only when the engine is cool. Coolant Surge Tank Pressure Cap Notice: If the pressure cap is not tightly installed, coolant loss and possible engine damage may occur. Be sure the cap is properly and tightly secured. {CAUTION: See Engine Compartment Overview on page 6-12 for information on location. You can be burned if you spill coolant on hot engine parts.
If Steam Is Coming From Your Engine {CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down. Wait until there is no sign of steam or coolant before you open the hood. If you keep driving when your engine is overheated, the liquids in it can catch fire. You or others could be badly burned.
If you get the overheat warning with no sign of steam, try this for a minute or so: 1. In heavy traffic, let the engine idle in NEUTRAL (N) while stopped. If it is safe to do so, pull off the road, shift to PARK (P) or NEUTRAL (N) and let the engine idle. 2. Set the climate controls to the highest heat setting and fan speed and open the windows as necessary. If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for about 10 minutes.
Cooling System When you decide it is safe to lift the hood, here is what you will see: {CAUTION: An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down. The vehicle should be parked on a level surface. A. Electric Engine Cooling Fan B.
{CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned. Get any leak fixed before you drive the vehicle. Notice: Engine damage from running your engine without coolant is not covered by your warranty.
How to Add Coolant to the Coolant Surge Tank If you have not found a problem yet, check to see if coolant is visible in the surge tank. If coolant is visible but the coolant level is not at the FULL COLD mark on the front of the coolant surge tank, add a 50/50 mixture of clean, drinkable water and DEX-COOL® coolant at the coolant surge tank, but be sure the cooling system, including the coolant surge tank pressure cap, is cool before you do it. See Engine Coolant on page 6-20 for more information.
Notice: In cold weather, water can freeze and crack the engine, radiator, heater core and other parts. Use the recommended coolant and the proper coolant mixture. {CAUTION: You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. 1.
3. Fill the coolant surge tank with the proper mixture until the level inside the surge tank stabilizes at the FULL COLD mark on the front of the surge tank. 6-30 4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan. By this time, the coolant level inside the coolant surge tank may be lower.
5. Then replace the pressure cap. Be sure the cap is fully installed. If the LOW COOLANT message does not appear on the Driver Information Center (DIC) after two minutes, the coolant is at the proper fill level. If a LOW COOLANT message does appear, repeat Steps 1 through 3 then reinstall the pressure cap, or see your dealer. Power Steering Fluid See Engine Compartment Overview on page 6-12 for reservoir location.
Windshield Washer Fluid Notice: • When using concentrated washer fluid, follow the What to Use manufacturer’s instructions for adding water. When you need windshield washer fluid, be sure to read the manufacturer’s instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing. • Do not mix water with ready-to-use washer fluid.
Brakes Brake Fluid Your brake master cylinder reservoir is filled with DOT-3 brake fluid. See Engine Compartment Overview on page 6-12 for the location of the reservoir. There are only two reasons why the brake fluid level in the reservoir might go down. The first is that the brake fluid goes down to an acceptable level during normal brake lining wear. When new linings are put in, the fluid level goes back up. The other reason is that fluid is leaking out of the brake system.
Checking Brake Fluid You can check the brake fluid without taking off the cap. Look at the brake fluid reservoir. The fluid level should be above the MIN mark on the reservoir. If it is not, have your brake system checked to see if there is a leak. After work is done on the brake hydraulic system, make sure the level is between the MIN and MAX marks. What to Add When you do need brake fluid, use only DOT-3 brake fluid. Refer to Recommended Fluids and Lubricants on page 7-11.
Replacing Brake System Parts {CAUTION: The brake wear warning sound means that soon your brakes will not work well. That could lead to an accident. When you hear the brake wear warning sound, have your vehicle serviced. Notice: Continuing to drive with worn-out brake pads could result in costly brake repair. Some driving conditions or climates may cause a brake squeal when the brakes are first applied or lightly applied. This does not mean something is wrong with your brakes.
Battery Your vehicle has a maintenance free battery. When it is time for a new battery, get one that has the replacement number shown on the original battery’s label. We recommend an ACDelco® replacement battery. For battery replacement, see your dealer or the service manual. To purchase a service manual, see Service and Owner Publications in Service Publications Ordering Information on page 8-12.
Jump Starting If your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. {CAUTION: Batteries can hurt you. They can be dangerous because: • They contain acid that can burn you. • They contain gas that can explode or ignite. • They contain enough electricity to burn you. If you do not follow these steps exactly, some or all of these things can hurt you.
4. Open the hoods and locate the batteries. Find the positive (+) and negative (−) terminal locations on each vehicle. See Engine Compartment Overview on page 6-12 for more information on location. {CAUTION: An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan. {CAUTION: Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded.
{CAUTION: Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. Before you connect the cables, here are some basic things you should know. Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one.
8. Now connect the black negative (−) cable to the negative (−) terminal of the good battery. Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative (−) cable does not go to the dead battery. It goes to a heavy, unpainted metal engine part or to a remote negative (−) terminal on the vehicle with the dead battery.
To disconnect the jumper cables from both vehicles, do the following: How to Check Lubricant 1. Disconnect the black negative (−) cable from the vehicle that had the dead battery. 2. Disconnect the black negative (−) cable from the vehicle with the good battery. 3. Disconnect the red positive (+) cable from the vehicle with the good battery. 4. Disconnect the red positive (+) cable from the other vehicle.
What to Use To add lubricant when the level is low, use SAE 75W–90 Synthetic Gear Lubricant (GM Part No. 12378261) or equivalent meeting GM Specification 9986115. To completely refill after draining, add 4 ounces (118 ml) of Limited-Slip Differential Lubricant Additive (GM Part No. 1052358) or equivalent. Then fill to the bottom of the filler plug hole with the Synthetic Gear Lubricant. Headlamp Aiming If your vehicle is damaged in an accident, the headlamp aim may be affected.
• The vehicle should be normally loaded with a full tank of fuel and one person or 160 lbs (75 kg) on the driver’s seat. • Tires should be properly inflated. • Start the vehicle and rock it to level the suspension. Headlamp aiming is done with the vehicle low beam lamps. The high beam lamps will be correctly aimed if the low beam lamps are aimed properly. The headlamp aiming devices are under the hood near the headlamps.
Notice: Do not cover a headlamp to improve beam cut-off when aiming. Covering a headlamp may cause excessive heat build-up which may cause damage to the headlamp. 4. Turn on the low-beam headlamps and place a piece of cardboard or equivalent in front of the headlamp not being aimed. This should allow only the beam of light from the headlamp being aimed to be seen on the flat surface. 5. Turn the vertical aiming screw until the headlamp beam is aimed to the horizontal tape line.
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected at least twice a year for wear or cracking. See “Wiper Blade Check” under Scheduled Maintenance on page 7-4. It is a good idea to clean or replace the wiper blade assembly on a regular basis or when worn. For proper windshield wiper blade length and type, see Normal Maintenance Replacement Parts on page 7-13. To replace the wiper blade assembly, do the following: 1. Place the vehicle in accessory mode and turn the wipers on.
Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your GM Warranty booklet for details. For additional information refer to the tire manufacturer’s booklet included with your vehicle’s Owner’s Manual. 6-46 {CAUTION: Poorly maintained and improperly used tires are dangerous. • Overloading your tires can cause overheating as a result of too much friction.
Tire Sidewall Labelling Useful information about a tire is molded into its sidewall. The example below shows a typical passenger (p-metric) tire sidewall. (B) TPC Spec (Tire Performance Criteria Specification): Original equipment tires designed to GM’s specific tire performance criteria have a TPC specification code molded onto the sidewall. GM’s TPC specifications meet or exceed all federal safety guidelines.
Tire Size The following illustration shows an example of a typical passenger (p-metric) vehicle tire size. (C) Aspect Ratio: A two-digit number that indicates the tire height-to-width measurements. For example, if the tire size aspect ratio is 60, as shown in item C of the illustration, it would mean that the tire’s sidewall is 60 percent as high as it is wide. (D) Construction Code: A letter code is used to indicate the type of ply construction in the tire.
Tire Terminology and Definitions Air Pressure: The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kiloPascal (kPa). Accessory Weight: This means the combined weight of optional accessories. Some examples of optional accessories are, automatic transmission, power steering, power brakes, power windows, power seats, and air conditioning. Aspect Ratio: The relationship of a tire’s height to its width.
Intended Outboard Sidewall: The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. KiloPascal (kPa): The metric unit for air pressure. Light Truck (LT-Metric) Tire: A tire used on light duty trucks and some multipurpose passenger vehicles. Load Index: An assigned number ranging from 1 to 279 that corresponds to the load carrying capacity of a tire. Maximum Inflation Pressure: The maximum air pressure to which a cold tire may be inflated.
Speed Rating: An alphanumeric code assigned to a tire indicating the maximum speed at which a tire can operate. Traction: The friction between the tire and the road surface. The amount of grip provided. Tread: The portion of a tire that comes into contact with the road. Treadwear Indicators: Narrow bands, sometimes called “wear bars,” that show across the tread of a tire when only 1/16 inch (1.6 mm) of tread remains. See When It Is Time for New Tires on page 6-58.
Run-Flat Tires Your vehicle, when new, had run-flat tires. There’s no spare tire, no tire changing equipment and no place to store a tire in the vehicle. Run-flat tires perform so well without any air that a Tire Pressure Monitor (TPM) is used to alert you if a tire has lost pressure. If a tire goes flat, you won’t need to stop on the side of the road to change the tire. You can just keep on driving.
Inflation - Tire Pressure {CAUTION: Run-flat tires are constructed differently than other tires and could explode during improper service. You or others could be injured or killed if you attempt to repair, replace, dismount, or mount a run-flat tire. Let only an authorized run-flat service center repair, replace, dismount and mount run-flat tires. The valve stems on your run-flat tires have sensors that are part of the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor System on page 6-55.
A Tire and Loading Information label is attached to the center pillar, below the driver’s door latch. This label shows your vehicle’s original equipment tires and the correct inflation pressures for your tires when they are cold. The recommended cold tire inflation pressure, shown on the label, is the minimum amount of air pressure needed to support your vehicle’s maximum load carrying capacity.
Tire Pressure Monitor System The Tire Pressure Monitor (TPM) System on your vehicle, uses radio and sensor technology to check tire pressure levels. Sensors, mounted on each tire and wheel assembly transmit tire pressure readings to a receiver located in the vehicle. The TPM sensors transmit tire pressure readings once every 60 seconds while the vehicle is being driven and once every 60 minutes when the vehicle is stationary for more than 15 minutes.
Each TPM sensor has a unique identification code that is matched to one of the four tire positions on your vehicle. The tire and wheel assembly positions are, left front (LF); right front (RF); right rear (RR) and left rear (LR). Any time you rotate your vehicle’s tires or replace one or more TPM sensors, the identification codes will need to be matched to the new tire and wheel position. The TPM matching process is performed in a specific sequence and time limit. A special tool is also required.
Tire Inspection and Rotation Your vehicle’s tires should be inspected regularly for wear. Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 6-58 and Wheel Replacement on page 6-61 for additional information. Vehicles equipped with the Tire Pressure Monitor (TPM) system will need to have the sensors reset after a tire rotation is performed.
When It Is Time for New Tires One way to tell when it’s time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. You need a new tire if any of the following statements are true: • You can see the indicators at three or more places around the tire. • You can see cord or fabric showing through the tire’s rubber. • The tread or sidewall is cracked, cut or snagged deep enough to show cord or fabric.
Uniform Tire Quality Grading {CAUTION: Mixing tires could cause you to lose control while driving. If you mix tires of different sizes or types (radial and bias-belted tires), the vehicle may not handle properly, and you could have a crash. Using tires of different sizes may also cause damage to your vehicle. Be sure to use the same size and type tires on all wheels. {CAUTION: If you use bias-ply tires on your vehicle, the wheel rim flanges could develop cracks after many miles of driving.
Treadwear Temperature – A, B, C The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1.5) times as well on the government course as a tire graded 100.
Wheel Alignment and Tire Balance The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. If you notice unusual tire wear or your vehicle pulling one way or the other, the alignment may need to be reset. If you notice your vehicle vibrating when driving on a smooth road, your wheels may need to be rebalanced. Wheel Replacement Replace any wheel that is bent, cracked, or badly rusted or corroded.
{CAUTION: {CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after a time. The wheel could come off and cause a crash. When you change a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, you can use a cloth or a paper towel to do this; but be sure to use a scraper or wire brush later, if you need to, to get all the rust or dirt off.
Used Replacement Wheels Tire Chains {CAUTION: {CAUTION: Putting a used wheel on your vehicle is dangerous. You can’t know how it’s been used or how far it’s been driven. It could fail suddenly and cause a crash. If you have to replace a wheel, use a new GM original equipment wheel. Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension or other vehicle parts.
Lifting Your Vehicle {CAUTION: {CAUTION: Lifting a vehicle can cause an injury. The vehicle can slip off the jack and roll over you or other people. You and they could be badly injured. Find a level place to lift your vehicle. To help prevent the vehicle from moving: 1. Set the parking brake firmly. 2. Put an automatic transmission shift lever in PARK (P). 3. Turn off the engine. To be even more certain the vehicle won’t move, you can put blocks in front of and behind the wheels.
If you ever use a jack to lift your vehicle, follow the instructions that came with the jack, and be sure to use the correct lifting points to avoid damaging your vehicle. Lifting From the Front Notice: Lifting your vehicle improperly can damage your vehicle and result in costly repairs not covered by your warranty. To lift your vehicle properly, follow the advice in this part. To help prevent vehicle damage: • Be sure to place a block or pad between the jack and the vehicle.
1. Locate the front lifting points (A), according to the illustration shown. 2. Be sure to place a block or pad between the jack and the vehicle. 6-66 3. Lift the vehicle with the jack, making sure the jack spans at least two of the crossmember ribs (B).
Lifting From the Rear 1. Locate the rear lifting points (A), according to the illustration shown. The rear lifting points can be accessed from the rear of the vehicle, on either the driver’s or passenger’s side. 2. Be sure to place a block or pad between the jack and the vehicle.
If a Tire Goes Flat It’s unusual for a tire to “blow out” while you’re driving, especially if you maintain your tires properly. If air goes out of a tire, it’s much more likely to leak out slowly. See Tires on page 6-46 for additional information. Your vehicle, when new, had run-flat tires. This type of tire can operate effectively with no air pressure, so you won’t need to stop on the side of the road to change a flat tire. You can just keep on driving.
{CAUTION: {CAUTION: When the TIRE FLAT MAX SPD 55, REDUCED HNDLG message is displayed on the Driver Information Center, your vehicle’s handling capabilities will be reduced during severe maneuvers. If you drive too fast, you could lose control of your vehicle. You or others could be injured. Don’t drive over 55 mph (90 km/h) when the TIRE FLAT MAX SPD 55, REDUCED HNDLG message is displayed. Drive cautiously and check your tire pressures as soon as you can.
Appearance Care Cleaning products can be hazardous. Some are toxic. Other cleaning products can burst into flames if a match is struck near them or if they get on a hot part of the vehicle. Some are dangerous if their fumes are inhaled in an enclosed space. When anything from a container is used to clean the vehicle, be sure to follow the manufacturer’s warnings and instructions. Always open the doors or windows of the vehicle when cleaning the inside.
Most stains can be removed with club soda water. To clean, use the following instructions: 1. For liquids: blot with a clean, soft, white cloth. For solids: remove as much as possible and then vacuum or brush. 2. Apply club soda water to a clean, soft, white cloth. Do not over-saturate; the cloth should not drip water. 3. Clean the entire area. Avoid getting the fabric too wet. 4. Start cleaning from the seams into the stain to avoid a ring effect. 5.
Vinyl Instrument Panel Use warm water and a clean cloth. Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones or waxes may cause annoying reflections in the windshield and even make it difficult to see through the windshield under certain conditions. • Rub with a clean, damp cloth to remove dirt. This may have to be done more than once. • Things like tar, asphalt, and shoe polish will stain if they are not removed quickly.
Speaker Covers Care of Safety Belts Vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with just water and mild soap. Keep belts clean and dry. Glass Surfaces Glass should be cleaned often. GM Glass Cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass. See Vehicle Care/Appearance Materials on page 6-78.
Washing Your Vehicle Cleaning Exterior Lamps/Lenses The paint finish on the vehicle provides beauty, depth of color, gloss retention, and durability. Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow instructions under Washing Your Vehicle on page 6-74. The best way to preserve the vehicle’s finish is to keep it clean by washing it often with lukewarm or cold water. Do not wash the vehicle in the direct rays of the sun.
Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it. Use only non-abrasive waxes and polishes that are made for a basecoat/clearcoat paint finish on your vehicle. Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage the vehicle’s finish if they remain on painted surfaces. Wash the vehicle as soon as possible.
Aluminum or Chrome-Plated Wheels The vehicle may be equipped with either aluminum or chrome-plated wheels. Keep the wheels clean using a soft clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft clean towel. A wax may then be applied. Notice: If you use strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated wheels, you could damage the surface of the wheel(s).
Sheet Metal Damage Underbody Maintenance If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Chemicals used for ice and snow removal and dust control can collect on the underbody. If these are not removed, corrosion and rust can develop on the underbody parts such as fuel lines, frame, floor pan, and exhaust system even though they have corrosion protection.
Vehicle Care/Appearance Materials See your GM dealer for more information on purchasing the following products. Description Interior and exterior polishing cloth. Tar and Road Oil Remover Removes tar, road oil, and asphalt. Chrome Cleaner and Polish Use on chrome or stainless steel. White Sidewall Tire Cleaner Removes soil and black marks from whitewalls. Vinyl Cleaner Cleans vinyl tops, upholstery, and convertible tops. Glass Cleaner Removes dirt, grime, smoke and fingerprints.
Vehicle Identification Engine Identification Vehicle Identification Number (VIN) The eighth character in your VIN is the engine code. This code will help you identify your engine, specifications and replacement parts. Service Parts Identification Label You will find this label on your spare tire cover. It is very helpful if you ever need to order parts.
Electrical System Add-On Electrical Equipment Notice: Don’t add anything electrical to your vehicle unless you check with your dealer first. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered by your warranty. Some add-on electrical equipment can keep other components from working as they should. Your vehicle has an airbag system. Before attempting to add anything electrical to your vehicle, see Servicing Your Airbag-Equipped Vehicle on page 1-47.
Instrument Panel Fuse Block The panel fuse block is located on the passenger’s side of the vehicle, under the instrument panel and under the toe-board. Remove the carpet and toe-board covering to access the fuse block by pulling at the top of each corner of the panel. Then turn the fuse block door knob counterclockwise and pull the door to access the fuses.
Fuses 21 22 23 24 25 26 27 28 29 30 31 32 33 6-82 Usage Adaptive Cruise Control (ACC), Driver Door Switch Power Tilt Wheel, Telescopic Steering Column, Memory Seat, Driver Seat Switch, Retractable Hardtop Switch Ignition Switch, Intrusion Sensor Stop Lamp Inside Rearview Mirror, Climate Control System, Column Lock, Power Sounder Instrument Panel Cluster, Head-Up Display (HUD) Radio, S-Band, CD Changer Tap-Up/Tap-Down Switch Climate Control System, Power Sounder Rear Fog Lamps, Diagnostic Link Connector Po
Underhood Fuse Block The underhood fuse block is located next to the engine on the passenger’s side of the vehicle. For more information on location, see Engine Compartment Overview on page 6-12. Fuses To access the fuses, push in the tab located at the end of the fuse block cover. Then lift the cover open.
Fuses 10 11 12 13 14 15 16 17 18 19 21 22 23 24 25 26 27 28 29 30 31 32 33 6-84 Usage Fuel Pump Engine Control Module, Transmission Control Module Odd Injectors Magnetic Ride Control Emission Controls Air Conditioning Compressor Even Injectors Windshield Washer Headlamp Washer Right Low Beam Headlamp Left Low Beam Headlamp Fog Lamp Right High Beam Headlamp Left High Beam Headlamp Not Used Battery 3 Anti-Lock Brakes Climate Controls Battery 2 Starter Audio Amplifier Cooling Fan Battery 1 Fuses 48 49 50 51
Capacities and Specifications The following approximate capacities are given in English and metric conversions. Please refer to Recommended Fluids and Lubricants on page 7-11 for more information. Capacities English Metric Air Conditioning Refrigerant R134a 1.4 lbs 0.64 kg Cooling System 14.8 quarts 14.0 L Engine Oil with Filter 8.0 quarts 7.6 L Fuel Tank 18.0 gallons 68.0 L Automatic Transmission 9.5 quarts 8.5 L Wheel Nut Torque 100 ft lb 140 Y All capacities are approximate.
✍ NOTES 6-86
Section 7 Maintenance Schedule Maintenance Schedule ......................................7-2 Introduction ...................................................7-2 Maintenance Requirements ..............................7-2 Your Vehicle and the Environment ....................7-2 Using Your Maintenance Schedule ....................7-2 Scheduled Maintenance ...................................7-4 Additional Required Services ............................7-6 Maintenance Footnotes ................................
Maintenance Schedule Introduction Important: Keep engine oil at the proper level and change as recommended. Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment. All recommended maintenance is important. Improper vehicle maintenance can even affect the quality of the air we breathe. Improper fluid levels or the wrong tire inflation can increase the level of emissions from your vehicle.
This schedule is for vehicles that: • carry passengers and cargo within recommended limits. You will find these limits on the tire and loading information label. See Loading Your Vehicle on page 5-30. • are driven on reasonable road surfaces within legal driving limits. • use the recommended fuel. See Gasoline Octane on page 6-5. The services in Scheduled Maintenance on page 7-4 should be performed when indicated.
Scheduled Maintenance When the CHANGE OIL NOW message in the Driver Information Center (DIC) comes on, it means that service is required for your vehicle. Have your vehicle serviced as soon as possible within the next 600 miles (1 000 km). It is possible that, if you are driving under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year.
Scheduled Maintenance Maintenance I Maintenance II Change engine oil and filter. See Engine Oil on page 6-13. Reset oil life system. See Engine Oil Life System on page 6-16. An Emission Control Service. Service • • Visually check for any leaks or damage. See footnote (a). • • Inspect engine air cleaner filter. If necessary, replace filter. See Engine Air Cleaner/Filter on page 6-18. An Emission Control Service. See footnotes † and (h).
Additional Required Services The following services should be performed at the first maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Inspect exhaust system for loose or damaged components. Replace engine air cleaner filter. See Engine Air Cleaner/Filter on page 6-18. An Emission Control Service. Change automatic transmission fluid and filter (severe service).
Maintenance Footnotes † The U.S. Environmental Protection Agency or the California Air Resources Board has determined that the failure to perform this maintenance item will not nullify the emission warranty or limit recall liability prior to the completion of the vehicle’s useful life. We, however, urge that all recommended maintenance services be performed at the indicated intervals and the maintenance be recorded. (a) A fluid loss in any vehicle system could indicate a problem.
Owner Checks and Services Engine Coolant Level Check These owner checks and services should be performed at the intervals specified to help ensure the safety, dependability and emission control performance of your vehicle. Your GM Goodwrench dealer can assist you with these checks and services. Check the engine coolant level and add DEX-COOL® coolant mixture if necessary. See Engine Coolant on page 6-20 for further details. Be sure any necessary repairs are completed at once.
At Least Once a Year Starter Switch Check {CAUTION: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. Transmission Shift Lock Control System Check {CAUTION: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle. 1. Before you start, be sure you have enough room around the vehicle.
Parking Brake and Transmission Park (P) Mechanism Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake. • To check the parking brake’s holding ability: With the {CAUTION: When you are doing this check, your vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of your vehicle in case it begins to roll.
Recommended Fluids and Lubricants Fluids and lubricants identified below by name, part number or specification may be obtained from your dealer. Usage Engine Oil Fluid/Lubricant The engine requires a special engine oil meeting GM Standard GM4718M. Oils meeting this standard may be identified as synthetic, and should also be identified with the American Petroleum Institute Certified for Gasoline Engines starburst symbol.
Usage Fluid/Lubricant Rear Axle (Limited-Slip Differential) SAE 75W-90 Synthetic Axle Lubricant (GM Part No. U.S. 12378261, in Canada 10953455) meeting GM Specification 9986115. With a complete drain and refill add 4 ounces (118 ml) of Limited-Slip Axle Lubricant Additive (GM Part No. U.S. 1052358, in Canada 992694) where required. See Rear Axle on page 6-41. Hood Latch Assembly, Secondary Latch, Pivots, Spring Anchor and Release Pawl Lubriplate Lubricant Aerosol (GM Part No. U.S.
Normal Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your dealer.
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service and the type of services performed in the boxes provided. See Maintenance Requirements on page 7-2 in this section. Any additional information from Owner Checks and Services on page 7-8 can be added on the following record pages. Also, you should retain all maintenance receipts.
Maintenance Record (cont’d) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed 7-15
Maintenance Record (cont’d) Date 7-16 Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed
Section 8 Customer Assistance and Information Customer Assistance and Information ...............8-2 Customer Satisfaction Procedure ......................8-2 Online Owner Center ......................................8-3 Customer Assistance for Text Telephone (TTY) Users ........................................................8-4 Customer Assistance Offices ............................8-4 GM Mobility Reimbursement Program ................8-5 Roadside Service ...........................................
Customer Assistance and Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Cadillac. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
The BBB Auto Line Program is an out of court program administered by the Council of Better Business Bureaus to settle automotive disputes regarding vehicle repairs or the interpretation of the New Vehicle Limited Warranty. Although you may be required to resort to this informal dispute resolution program prior to filing a court action, use of the program is free of charge and your case will generally be heard within 40 days.
Customer Assistance for Text Telephone (TTY) Users To assist customers who are deaf, hard of hearing, or speech-impaired and who use Text Telephones (TTYs), Cadillac has TTY equipment available at its Customer Assistance Center. Any TTY user can communicate with Cadillac by dialing: 1-800-833-CMCC (2622). (TTY users in Canada can dial 1-800-263-3830.) Customer Assistance Offices Cadillac encourages customers to call the toll-free number for assistance. If a U.S.
Overseas — Customer Assistance Please contact the local General Motors Business Unit. GM Mobility Reimbursement Program Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance This program, available to qualified applicants, can reimburse you up to $1,000 toward eligible aftermarket driver’s or passenger’s adaptive equipment you may require for your vehicle, such as hand controls and wheelchair/scooter lifts. General Motors de Mexico, S.
Roadside Service Cadillac’s exceptional Roadside Service is more than an auto club or towing service. It provides every Cadillac owner with the advantage of contacting a Cadillac advisor and, where available, a Cadillac trained dealer technician who can provide on-site service. Each technician travels with a specially equipped service vehicle complete with the necessary Cadillac parts and tools required to handle most roadside repairs.
Roadside Service for the Hearing or Speech Impaired Roadside Service is prepared to assist owners who have hearing difficulties or are speech impaired. Cadillac has installed special telecommunication devices called Text Telephone (TTY) in the Roadside Service Center. Scheduling Service Appointments When your vehicle requires warranty service, you should contact your dealer and request an appointment.
Transportation Options Courtesy Rental Vehicle Warranty service can generally be completed while you wait. However, if you are unable to wait Cadillac helps minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following: Your GM dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle that you obtain if your vehicle is kept for a warranty repair.
Courtesy Transportation is available only at participating dealers and all program options, such as shuttle service, may not be available at every dealer. Please contact your dealer for specific information about availability. All Courtesy Transportation arrangements will be administered by appropriate dealer personnel.
This information has been used to improve vehicle crash performance and may be used to improve crash performance of future vehicles and driving safety. Unlike the data recorders on many airplanes, these on-board systems do not record sounds, such as conversation of vehicle occupants. In addition, once GM collects or receives data, GM may: To read this information, special equipment is needed and access to the vehicle or the device that stores the data is required.
Reporting Safety Defects Reporting Safety Defects to the United States Government If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA), in addition to notifying General Motors. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body, etc. Transmission, Transaxle, Transfer Case Unit Repair Manual This manual provides information on unit repair service procedures, adjustments, and specifications for GM transmissions, transaxles, and transfer cases.
Owner’s Information Owner publications are written specifically for owners and intended to provide basic operational information about the vehicle. The owner’s manual will include the Maintenance Schedule for all models. In-Portfolio: Includes a Portfolio, Owner’s Manual, and Warranty Booklet. RETAIL SELL PRICE: $35.00 Without Portfolio: Owner’s Manual only. RETAIL SELL PRICE: $25.
✍ NOTES 8-14
A Accessory Power Outlets ................................. 3-38 Adaptive Cruise Control ................................... 3-16 Additives, Fuel ................................................. 6-6 Add-On Electrical Equipment ............................ 6-80 Air Cleaner/Filter, Engine ................................. 6-18 Air Conditioning .............................................. 3-40 Airbag Off Light ..................................................... 3-50 Readiness Light .......................
Audio System(s) (cont.) Theft-Deterrent Feature ................................ Understanding Radio Reception ..................... XM™ Satellite Radio Antenna System ............ Automatic Transmission Fluid .......................................................... Operation ................................................... Avoid Point/Area, Edit ...................................... 3-78 3-80 3-81 6-20 2-25 4-20 B Battery ..........................................................
Child Restraints (cont.) Securing a Child Restraint in the Passenger Seat Position ........................................... Top Strap ................................................... Cigarette Lighter ............................................. Cleaning Aluminum or Chrome-Plated Wheels .............. Exterior Lamps/Lenses ................................. Fabric/Carpet .............................................. Finish Care ................................................. Glass Surfaces ........
D Database Coverage Explanations ...................... 4-45 Daytime Running Lamps .................................. 3-30 Defensive Driving ............................................. 5-2 Diversity Antenna System ................................. 3-81 Doing Your Own Service Work ........................... 6-4 Door Locks .......................................................... 2-9 Power Door Locks ....................................... 2-11 Driver Position, Safety Belt ................................
Enter Destination ............................................ 4-21 Entry/Exit Lighting ........................................... 3-33 Event Data Recorders (EDR) ............................. 8-9 Extender, Safety Belt ....................................... 1-18 Exterior Lamps ............................................... 3-28 Exterior Lighting Battery Saver .......................... 3-32 F Filter Engine Air Cleaner ...................................... 6-18 Finish Damage ............................
H I Hazard Warning Flashers ................................... 3-6 Headlamp Aiming ....................................................... 6-42 Vertical Aiming ............................................ 6-43 Headlamps Bulb Replacement ....................................... 6-44 Daytime Running Lamps ............................... 3-30 Flash-to-Pass ............................................... 3-9 High/Low Beam Changer ................................ 3-8 On Reminder ...............................
Lamps (cont.) Exterior ...................................................... Exterior Lighting Battery Saver ...................... Fog ........................................................... Reading ..................................................... Twilight Sentinel® ........................................ LATCH System Child Restraints ........................................... Securing a Child Restraint Designed for the LATCH System ........................................
Maintenance Schedule (cont.) Normal Maintenance Replacement Parts ......... 7-13 Owner Checks and Services ........................... 7-8 Recommended Fluids and Lubricants ............. 7-11 Scheduled Maintenance ................................. 7-4 Using Your ................................................... 7-2 Your Vehicle and the Environment ................... 7-2 Malfunction Indicator Light ................................ 3-55 Map Pocket ...................................................
Outside Automatic Dimming Mirror ............................. 2-35 Convex Mirror ............................................. 2-36 Curb View Assist Mirror ................................ 2-35 Power Heated Mirrors .................................. 2-34 Overheated Engine Protection Operating Mode ..... 6-25 Owner Checks and Services .............................. 7-8 Owners, Canadian ............................................... ii P Park Aid ........................................................
R Radio ............................................................ 4-45 Personalization with Home and Away Feature .... 4-69 Radios .......................................................... 3-78 Care of Your CD Player ............................... 3-80 Care of Your CDs ........................................ 3-80 Theft-Deterrent ............................................ 3-78 Understanding Reception .............................. 3-80 Rainsense™ Wipers ........................................
Safety Belts Care of ...................................................... 6-73 Driver Position ............................................ 1-10 How to Wear Safety Belts Properly ................ 1-10 Passenger Position ...................................... 1-18 Questions and Answers About Safety Belts ....... 1-9 Safety Belt Extender .................................... 1-18 Safety Belt Use During Pregnancy ................. 1-17 Safety Belts Are for Everyone .........................
Stuck in Sand, Mud, Ice or Snow ...................... 5-29 Sun Visors ..................................................... 2-18 Symbols ........................................................ 4-36 System Needs Service, If ................................. 4-45 System Overview Overview, Navigation System .......................... 4-2 T Tachometer .................................................... 3-48 TCS Warning Light ..........................................
Transmission Fluid, Automatic ........................................... 6-20 Transmission Operation, Automatic .................... 2-25 Trip Computer Oil Life Indicator .......................................... 3-77 Trip Odometer ................................................ 3-48 Trunk ............................................................ 2-13 Turn and Lane-Change Signals .......................... 3-8 Turn Signal/Multifunction Lever ........................... 3-7 Twilight Sentinel® .........
Wheels Alignment and Tire Balance .......................... 6-61 Replacement ............................................... 6-61 Windows ....................................................... 2-16 Power ........................................................ 2-17 Windshield Wiper Blades, Cleaning ................................ 6-75 Windshield Washer ......................................... 3-12 Fluid .......................................................... 6-32 Windshield Wiper Blade Replacement ..
