User's Manual

Q3: How come some devices within the connection range may not show up in the list of

devices found?ʳ

A3: Your device is configured to report only specific types or classes of devices (Bluetooth

Configuration Panel > Discovery tab, on your device). The unlisted device is

configured to be non-discoverable (Bluetooth Configuration Panel > Accessibility tab,

on the un-listed device).ʳ

Q4: Cannot connect to a paired device.

A4: Paired devices are always displayed in My Bluetooth Places, even if the remote

device is out of range or not powered up.

Verify that the remote member of the pair is within radio range, and powered up, and

then attempt the connection again.

Q5: Cannot discover services on an un-paired remote device

A5: The remote device may not be powered up or may be out of range.

zVerify that the remote device is powered up.

zVerify that the remote device is in Connectable mode (Bluetooth Configuration

Panel > Accessibility tab).

zҏPerform a Search for Devices to verify that the device is within range.

Q6: Dial-up networking service does not start.

A6: The Dial-up Networking service will not start unless a properly configured modem is

attached to the server.

zVerify that the modem is usable as a local device on the computer to which it is

attached. In the Bluetooth Configuration PanelÆLocal Services tabÆ double-click

the Dial-up Networking serviceÆClick the down arrow in the Modem field and

select the modem that will be used to dial out, click the OK button to close the

Bluetooth Configuration Panel.

Q7: Determine the Bluetooth device address (BDA) of my hardware device.

A7: In the Bluetooth Configuration Panel, on the Hardware tab, in the Devices section,

select the device you want to determine the address of. In the Device Properties

section of the dialog box, the fourth entry, Device Address, is the BDA of the selected

Bluetooth device.

Q8: Determine the version of the host controller interface (HCI)

A8: In the Bluetooth configuration panel, on the hardware tab, in the device properties

Section, the fifth entry provides Bluetooth specification compliance information for the

host controller interface.

The sixth entry contains the specification revision information for the host controller

Interface, if appropriate.

Q9: Determine the version of the link manager protocol (IMP)

A9: In the Bluetooth configuration panel, on the hardware tab, in the device properties

section, the seventh entry provides link manager protocol version number

information.

The eighth entry contains the link manager protocol sub-version number information,

if appropriate.

Q10: How to find information about the Bluetooth hardware attached to my computer?

A10: In the Bluetooth configuration panel, select the hardware tab.

Q11: Internet connection sharing does not work