User's Manual
65
A11: This occurs because Internet connection sharing was enabled when Bluetooth was
installed (this is a Microsoft windows behavior and is considered proper operation).
To resolve the “problem”:
1. Disable sharing for the Ethernet adapter:
(a) Windows control panel > network and dial-up connections
(b) Right-click “local area connection,” select properties, and then select the
Sharing tab.
(c) Clear (uncheck) the box for “enable internet connection sharing for this
“Connection” and click ok.
2. Re-enable sharing for the Ethernet adapter; repeat step 1.c.), and select (check)
the sharing box.
If offered an option to select an adapter, select “Bluetooth network adapter” (this
option will not appear unless more than one adapter is available.) If asked to reboot
the computer, do so.
Q12: Test a network access connection.
A12: If the client is hardwired to the LAN, unplug the hardwired connection to ensure that
the Test checks the wireless connection rather than the hardwired connection.
If the server has access to the Internet, open a browser on the client and connect to
the World Wide Web.
You may also ping the server from the dos prompt.
Q13: Unknown port message when using a Bluetooth serial port.
A13: The “unknown port” error message usually means an attempt was made to connect
a port that was in use. Additional Bluetooth serial ports can be added if they are
required.
Q14: Bluetooth headset doesn’t always function under Win98.
A14: Windows 98 cannot convert audio files with the extension m3u (e.g., myfile.m3u) into
the pulse code modulation (pcm) audio format used by Bluetooth headsets; this is a
limitation of windows 98.
Other versions of windows (2000, me and XP) can translate m3u audio files into the
pcm format.
Possible solutions are:
Upgrade to a newer version of Windows
Use an m3u-to-mp3 conversion utility to convert the file(s) into a format that is
supported by Windows 98. (Conversion utilities are available as freeware or
shareware on the Internet.)
Q15: How to shift the Buletooth driver to the original one in Windows XP sp2. Please
follow below instrcutions:
A15: (1)Click on Start Control Panel Performance and Maintenance System,
choose Hardware and then Device Manager on System Properties. After open
the Device Manager, right click your Buletooth Device, select “Properties”.