User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 17/01/2007 4
Code Description
0xFB
SourceName: a string representing the name of the data source. Attribute
value has a maximum length of 30 bytes and can assume the following
values:
“Source_0”, “Source_1”, “Source_2”, “Source_3”
Table 2.2: Command codes
Code Description
Comp.
0x12
RawReadIDs: permits to get all the tag’s Ids that are under the RF
field of the selected source.
Parameters:
SourceNameIn: [in] the name of the source to use.
SourceNameOut: [out] the name of the source used.
ReadPointName: [out] the name of the readpoint.
TimeStamp: [out] the time at which the tags are detected.
TagIDLen: [out] the ID length of the tags detected.
ListOfIDs: [out] the list of Ids detected from the source.
ResultCode: [out] the result code.
Note: out parameters are repeated for each readpoint in the source.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
0x3F
AddReadTrigger: permits to add a trigger to a source.
Parameters:
SourceName: [in] the name of the source.
TriggerName: [in] the name of the trigger.
ResultCode: [out] the result code.
A928EU
A948EU
0x40
AddNotifyTrigger: permits to add a trigger to a notification channel.
Parameters:
ChannelName: [in] the name of the channel.
TriggerName: [in] the name of the trigger.
ResultCode: [out] the result code.
A928EU
A948EU
0x41
RemoveReadTrigger: permits to remove a trigger from a source.
Parameters:
SourceName: [in] the name of the source.
TriggerName: [in] the name of the trigger.
ResultCode: [out] the result code.
A928EU
A948EU
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/04 EASY2READ_PROTOCOL_REV4.DOC 31 11