User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 17/01/2007 4
Code Description
Comp.
0x6F
WriteTagData: permits to write data to the tag memory.
Parameters
:
SourceName: [in] the name of the source to use.
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
TagAddress: [in] the address where to write the data.
Length: [in] the number of bytes to write.
TagValue: [in] the data to write to the tag memory.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
0x70
LockTag: permits to lock data into the tag memory.
Parameters
:
SourceName: [in] the name of the source to use.
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
TagAddress: [in] the address where to write the data.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
0x71
RESERVED
0x72
SetBitRate: permits to set the BitRate to use.
Parameters
:
BitRate: [in] the BitRate to set.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
0x73
GetPower: permits to get the current RF power level.
Parameters:
PowerGet: [out] the current power level.
ResultCode: [out] the result code.
A928EU
A948EU
A949EU
A946EU
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/04 EASY2READ_PROTOCOL_REV4.DOC 31 14