User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 17/01/2007 4
Code Description
Comp.
0x74
SetProtocol: permits to set the protocol to use.
Parameters
:
Protocol: [in] the protocol to use.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
0x75
RESERVED
0x76
CheckReadPointStatus: permits to check the quality of the antenna
connection.
Parameters:
ReadPointName: [in] the name of the readpoint.
ReadPointStatus: [out] the quality of the connection.
ResultCode: [out] the result code.
A928EU
A948EU
A949EU
A946EU
0x77
CheckSourceInChannel: permits to verify if a source is assigned to a
notify channel.
Parameters
:
SourceName: [in] the name of the source.
ChannelName: [in] the name of the channel.
Value: [out] a Boolean value meaning the belonging to the source.
ResultCode: [out] the result code.
A928EU
A948EU
0x78
CheckReadPointInSource: permits to verify if a readpoint belongs to
a givens source.
Parameters:
ReadPointName: [in] the name of the readpoint.
SourceName: [in] the name of the source.
Value: [out] a Boolean value meaning the belonging to the source.
ResultCode: [out] the result code.
A928EU
A948EU
A949EU
A946EU
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/04 EASY2READ_PROTOCOL_REV4.DOC 31 15