User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 17/01/2007 4
Code Description
Comp.
0x99
G2Kill: permits to execute the tag kill command defined by the EPC
Class 1 Gen 2 protocol.
Parameters
:
SourceName: [in, optional] the name of the source to use.
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
G2Password: [in] the kill password.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
0x9A
G2Query: permits to execute the tag query command defined by the
EPC Class 1 Gen 2 protocol. If a tag is in the field result code is
ERROR_SUCCESS (0x00) else result code is
ERROR_TAGNOTPRESENT (0xCA).
Parameters:
SourceName: [in] the name of the source to use.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
0x9B
G2SetQ: permits to change the initial value of the Q parameter used in
the Gen2 anticollision algorithm.
Parameters
:
QParameter: [in] the value of the Q parameter.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
0x9C
G2GetQ: permits to read the initial value of the Q parameter used in
the Gen2 anticollision algorithm.
Parameters
:
QParameter: [out] the value of the Q parameter.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828US
A829EU
A829US
A946EU
A949EU
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/04 EASY2READ_PROTOCOL_REV4.DOC 31 24