User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 17/01/2007 4
Code Description
0x69
IORegister: a value representing the status of the I/O lines of the reader.
Where input lines are separated from output ones, input lines are mapped
on the less significant bits while outputs are mapped on the most
significant. Attribute value is 4 bytes long (effective used bits depend on
the reader model).
0x6A
ConfigParameter: a value representing a configuration parameter.
Attribute value is 4 bytes long and can assume the following values:
0x00 = ReadCycle configuration
0x01 = Observed Threshold configuation
0x02 = Lost Threshold configuration
0x6B
ConfigValue: a value for the configuration parameter. Attribute value is 4
bytes long.
0x6C
NoOfTriggers: a value representing the number of triggers. Attribute value
is 2 bytes long.
0x6D
NoOfChannels: a value representing the number of channels. Attribute
value is 2 bytes long.
0x6E
EventMode: a value representing the event handling mode. Attribute value
is 2 bytes long and can assume the following values:
0x00 = ReadCycle mode
0x01 = Time Mode
0x02 = No Event Mode
0x6F
UpgradeType: a value representing the type of upgrade to perform.
Attribute value is 2 bytes long and can assume the following values:
0x01 = TFTP firmware upgrade.
0x70
UpgradeArgument: a value representing the argument for the requested
upgrade. Attribute value has a maximum length of 255 bytes.
For TFTP upgrade (code 0x01) the string has the form:
‘<tftpserverip>:<filename>’.
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/04 EASY2READ_PROTOCOL_REV4.DOC 31 9