User's Manual
Table Of Contents
- Overview
- 2. Getting started
- 2.1. Software User interface: installation
- 2.2. Launching the Software User interface
- 2.3. Connection configuration
- 2.4. Logical source selection
- 2.5. Detecting test tags with the RF field
- 2.6. Readout of one tag’s memory
- 2.7. Temperature monitoring with the semipassive tag
- 2.8. Creating the Log file
- 2.9. RF Field test
- 2.10. Quit CAEN RFID Demo program
- 2.11. ISO18000-6B protocol tags operations
- 2.12. EPC1.19 protocol tags operations
- 3. Firmware upgrade
- 4. RFID Test program
- 5. RFID CsDemo program
Document type: Title: Revision date: Revision:
User's Manual (MUT) RFID Software User Interface 18/02/2006 1
4. RFID Test program
This is a simple VisualC++ test program: go to the main directory CAEN RFID DEMO
KIT, then launch the TestRFID.exe executable file; the following Menu will be launched:
Fig. 4.1 – RFID Test main menu
4.1. Connection configuration
Once you have connected the CAEN UHF RFID Reader to your PC, turn it ON, then:
Click on
File > Connect
The following pop-up window will open:
Fig. 4.2 – Connection port configuration
Choose the connection type; if you are using TCP-IP enter the IP address (default:
192.168.0.125), if you are using RS232, type the connected port (COM1, COM2…) then
click on <Connect>.
NPO: Filename: Number of pages: Page:
00117/03:Demox.MUTx/01 RFIDDEMO_REV1.DOC 27 22