User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 02/04/2008 5
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/05 EASY2READ_PROTOCOL_REV5.DOC 32 10
Code Description
0x71
MemoryBank: a value representing the memory bank of a EPC Class 1
Generation 2 tag. Attribute value is 2 bytes long and can assume the
following values:
0x00 = Reserved Memory Bank
0x01 = EPC Memory Bank
0x02 = TID Memory Bank
0x03 = User Memory Bank
0x72
Payload: a value representing the payload parameter for the EPC Class 1
Gen 2 lock command (see the EPC Gen2 specification for details).
Attribute value is 4 bytes long.
0x73
G2Password: a value representing the password parameter for the EPC
Class 1 Gen 2 kill command (see the EPC Gen2 specification for details).
Attribute value is 4 bytes long.
0x74
G2NSI: a value representing the numbering system identifier for the EPC
Class 1 Gen 2 tags’ id (see the EPC Gen2 specification for details).
Attribute value is 2 bytes long.
0x75
QParameter: a value representing the initial value for the Q parameter
involved in the EPC Class 1 Gen 2 anticollision algorithm (see the EPC
Gen2 specification for details). Attribute value is 2 bytes long.
0x76
ReaderInfo: a string indicating the model and the serial number of the
reader.
0x77
RFRegulation: a value representing the RF regulation to use. Attribute
value is 2 bytes long and can assume the following values:
0x00 = ETSI EN 302 208
0x01 = ETSI EN 300 220
0x78
RFChannel: a value representing the RF channel to use. Attribute value is
2 bytes long and can assume values in the range 0 … 9. Channels are
referred to the ETSI EN 302 208 regulation.
0x96
PowerSet: a value representing the RF power emitted during the
communication with tags. Attribute value is 4 bytes long. (used to set a new
current value).