User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 02/04/2008 5
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/05 EASY2READ_PROTOCOL_REV5.DOC 32 17
Code Description
Comp.
0x7D
GetDESB: permits to get the current setting of the “Data Exchange
Status Bit” handling.
Parameters
:
DESBStatus: [in] enabled/disabled value.
ResultCode: [out] the result code.
A928
A948
A528
A828
A828A
A829
A941
A946
A949
0x7E
ProgramID: permits to program the ID in the EPC Class 1 Gen 1 tags.
Parameters
:
SourceName: [in] the name of the source.
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
EPCPWD: [in] the EPC password to set.
Lock: [in] a Boolean value; TRUE = lock the ID. FALSE = do not lock.
ResultCode: [out] the result code.
A928
A948
0x7F
KillTag: permits to kill a EPC Class 1 Gen 1 tag.
Parameters
:
SourceName: [in] the name of the source.
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
EPCPWD: [in] the EPC password.
ResultCode: [out] the result code.
A928
A948
0x80
RFOnOff: permits to start/stop the generation of a continuous wave.
Used only for test and measurements purposes.
Parameters
:
RFOnOff: [in] = 0 Î stop; != 0 Î start
ResultCode: [out] the result code.
A928
A948
A528
A828
A828A
A829
A941
A946
A949