User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 02/04/2008 5
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/05 EASY2READ_PROTOCOL_REV5.DOC 32 26
Code Description
Comp.
0x9E
GetReaderInfo: permits to read some information about the reader
itself.
Parameters
:
ReaderInfo: [out] a string with information about the reader.
ResultCode: [out] the result code.
A928
A948
A528
A828
A828A
A829
A941
A946
A949
0x9F
SetLBTMode: permits to enable or disable the Listen Before Talk
capability on ETSI EN 302 208 compatible readers.
Parameters
:
Boolean: [in] 0 to disable LBT and ≠0 to enable LBT.
ResultCode: [out] the result code.
A941
A946
A948
A949
0xA0
GetLBTMode: permits to read the current setting for the Listen Before
Talk capability on ETSI EN 302 208 compatible readers.
Parameters
:
Boolean: [out] 0 if LBT is disabled, ≠0 if LBT is enabled.
ResultCode: [out] the result code.
A941
A946
A948
A949
0xA1
SetRFRegulation: permits to change the RF regulation used by the
reader.
Parameters
:
RFRegulation: [in] the desired RF regulation.
ResultCode: [out] the result code.
A941
A946
A948
A949
0xA2
GetRFRegulation: permits to read the RF regulation used by the
reader.
Parameters
:
RFRegulation: [out] the desired RF regulation.
ResultCode: [out] the result code.
A941
A946
A948
A949
0xA3
SetRFChannel: permits to set the RF channel where the reader emits
the RF field.
Parameters
:
RFChannel: [in] the RF channel.
ResultCode: [out] the result code.
A941
A946
A948
A949