User's Manual

Document type: Title: Revision date: Revision:
User's Manual (MUT) CAEN UHF RFID Readers Communication Protocol 02/04/2008 5
NPO: Filename: Number of pages: Page:
00117/03:PROTx.MUTx/05 EASY2READ_PROTOCOL_REV5.DOC 32 7
Code Description
0x57
Boolean: a value representing a boolean data. Attribute value is 2 bytes
long and can assume the following values:
0x00 = FALSE.
Not 0x00 = TRUE.
0x58
IPAddress: a string representing an IP address formatted with the standard
IP dotted decimal format. Attribute value has a maximum length of 30
bytes.
0x59
IPNetMask: a string representing an IP netmask formatted with the
standard IP dotted decimal format. Attribute value has a maximum length
of 30 bytes.
0x5A
IPGateway: a string representing an IP address formatted with the standard
IP dotted decimal format. Attribute value has a maximum length of 30
bytes.
0x5B
DESBEnable: used to enable/disable the Data Exchange Status Bit
handling for ISO18000-6b and EPC 1.19 anti-collision algorithm. Attribute
value is 2 bytes long and can assume the following values:
0x00 = Disable the DESB handling.
Not 0x00 = Enable the DESB handling.
0x5C
FWRelease: a string representing the device’s firmware revision. Attribute
value has a maximum length of 200 bytes.
0x5D
DESBStatus: used to check the Data Exchange Status Bit handling for
ISO18000-6b and EPC 1.19 anti-collision algorithm. Attribute value is 2
bytes long and can assume the following values:
0x00 = DESB handling is not enabled.
Not 0x00 = DESB handling is enabled.
0x5E
EPCPWD: a value representing an EPC tag password. Attribute value is 2
bytes long.
0x5F
RFOnOff: used to start the generation of a continuous wave for test
purposes. Attribute value is 2 bytes long and can assume the following
vaules:
0x00 = Stop the wave generation.
Not 0x00 = Start the wave generation.
0x60
BaudRate: a value representing the baudrate setting of serial port.
Attribute value is 4 bytes long.