User's Manual
Table Of Contents
- Overview
- 2. Getting started
- 2.1. Software User interface: installation
- 2.2. Launching the Software User interface
- 2.3. Connection configuration
- 2.4. Logical source selection
- 2.5. Detecting test tags with the RF field
- 2.6. Readout of one tag’s memory
- 2.7. Temperature monitoring with the semipassive tag
- 2.8. Creating the Log file
- 2.9. RF Field test
- 2.10. Quit CAEN RFID Demo program
- 2.11. ISO18000-6B protocol tags operations
- 2.12. EPC1.19 protocol tags operations
- 3. Firmware upgrade
- 4. RFID Test program
- 5. RFID CsDemo program
Document type: Title: Revision date: Revision:
User's Manual (MUT) RFID Software User Interface 18/02/2006 1
Fig. 3.6 – Firmware upgrade browser
The following information message will then be shown:
Fig. 3.7 – Firmwareupgrade message
Press ok and this confirmation message will be returned:
Fig. 3.8 – Confirmation message
Press YES then Download image via TFTP; the Firmware Upgrade is then completed.
NPO: Filename: Number of pages: Page:
00117/03:Demox.MUTx/01 RFIDDEMO_REV1.DOC 27 21