User's Manual

CAEN UHF RFID Readers Communication Protocol Technical Information Manual
14
Code
Description
Comp.
0x6F
WriteTagData: permits to write data to the tag memory.
Parameters:
SourceName: [in] the name of the source to use.
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
TagAddress: [in] the address where to write the data.
Length: [in] the number of bytes to write.
TagValue: [in] the data to write to the tag memory.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828AEU
A829EU
A949EU
R1230CB
R1260I
0x70
LockTag: permits to lock data into the tag memory.
Parameters:
SourceName: [in] the name of the source to use.
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
TagAddress: [in] the address where to write the data.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828AEU
A829EU
A949EU
R1230CB
R1260I
0x71
RESERVED
0x72
SetBitRate: permits to set the BitRate to use.
Parameters:
BitRate: [in] the BitRate to set.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828AEU
A829EU
A949EU
A528
R1230CB
R1260I
0x73
GetPower: permits to get the current RF power level.
Parameters:
PowerGet: [out] the current power level.
ResultCode: [out] the result code.
A928EU
A948EU
A949EU
A528
R1230CB
R1260I
0x74
SetProtocol: permits to set the protocol to use.
Parameters:
Protocol: [in] the protocol to use.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828AEU
A829EU
A949EU
A528
R1230CB
R1260I
0x75
RESERVED
0x76
CheckReadPointStatus: permits to check the quality of the antenna connection.
Parameters:
ReadPointName: [in] the name of the readpoint.
ReadPointStatus: [out] the quality of the connection.
ResultCode: [out] the result code.
A928EU
A948EU
A949EU
0x77
CheckSourceInChannel: permits to verify if a source is assigned to a notify channel.
Parameters:
SourceName: [in] the name of the source.
ChannelName: [in] the name of the channel.
Value: [out] a Boolean value meaning the belonging to the source.
ResultCode: [out] the result code.
A928EU
A948EU