User's Manual

CAEN RFID API – Reference Manual
11
Methods
Description
GetBufferedData
The function returns all the Tags stored in reader's memory using all
the ReadPoints belonging to the Source.
GetDESB_ISO180006B
This method can be used to retrieve the Data Exchange Status Bit
setting (see ISO18000-6B protocol specification) used by the
anticollision algorithm when called on this logical source.
GetName
Gets a string representing the name of the logical source.
GetQ_EPC_C1G2
This method can be used to retrieve the current setting for the initial Q
value (see EPC Class1 Gen2 protocol specification) used by the
anticollision algorithm when called on this logical source.
GetReadCycle
Gets the current setting for the number of read cycles performed by
the logical source during the inventory algorithm execution.
GetSelected_EPC_C1G2
This method can be used to retrieve the Selected flag (see EPC Class1
Gen2 protocol specification) used by the anticollision algorithm when
called on this logical source.
GetSession_EPC_C1G2
This method can be used to retrieve the Session setting (see EPC Class1
Gen2 protocol specification) used by the anticollision algorithm when
called on this logical source.
GetTarget_EPC_C1G2
This method can be used to retrieve the Target setting (see EPC Class1
Gen2 protocol specification) used by the anticollision algorithm when
called on this logical source.
GroupSelUnsel
This method can be used to send a Group Select/Unselect command to
the tag (see ISO18000-6B protocol specification).
Hitachi_BlockLock
Overloaded. This method can be used to issue a BlockLock custom
command as defined by the Hitachi Hibiki datasheet.
Hitachi_BlockReadLock
Overloaded. This method can be used to issue a BlockReadLock custom
command as defined by the Hitachi Hibiki datasheet.
Hitachi_GetSystemInformation
Overloaded. This method can be used to issue a GetSystemInformation
custom command as defined by the Hitachi Hibiki datasheet.
Hitachi_ReadLock
Overloaded. This method can be used to issue a ReadLock custom
command as defined by the Hitachi Hibiki datasheet.
Hitachi_SetAttenuate
Overloaded. This method can be used to issue a SetAttenuate custom
command as defined by the Hitachi Hibiki datasheet.
Hitachi_WriteMultipleWords
Overloaded. This method can be used to issue a WriteMultipleWords
custom command as defined by the Hitachi Hibiki datasheet.
InventoryTag
Overloaded. A call to this method will execute a read cycle on each
read point linked to the logical source. Depending on the air protocol
setting it will execute the appropriate anticollision algorithm.
isReadPointPresent
Checks if a read point is present in the logical source.
KillTag_EPC_C1G1
This method can be used to kill an EPC Class 1 Gen 1 tag.
KillTag_EPC_C1G2
Overloaded. This method can be used to kill an EPC of an EPC Class 1
Gen 2 tag.
LockBlockPermaLock_EPC_C1G2
This method implements the BLockPermaLock with ReadLock=1 as
specified in EPCC1G2 rev. 1.2.0 protocol.
LockTag_EPC_C1G2
Overloaded. This method can be used to lock a memory bank of an EPC
Class 1 Gen 2 tag.
LockTag_ISO180006B
This method can be used to lock a byte in the memory of a ISO18000-
6B tag.
NXP_ChangeEAS
This method can be used to issue a ChangeEAS custom command as
defined by the NXP G2XM and G2XL datasheet after having put it in
Secured state using the Access command.
NXP_EAS_Alarm
This method can be used to issue an EAS_Alarm custom command as
defined by the NXP G2XM and G2XL datasheet.
NXP_ReadProtect
Overloaded. This method can be used to issue a ReadProtect custom
command as defined by the NXP G2XM and G2XL datasheet.
NXP_ResetReadProtect
This method can be used to issue a ResetReadProtect custom
command as defined by the NXP G2XM and G2XL datasheet.
ProgramID_EPC_C1G1
This method can be used to write the EPC of an EPC Class 1 Gen 1 tag.
ProgramID_EPC_C1G2
Overloaded. This method can be used to write the EPC of an EPC Class
1 Gen 2 tag.
ProgramID_EPC119
This method can be used to write the UID of an EPC 1.19 tag.
Query_EPC_C1G2
This method make the reader generate an EPC Class1 Gen2 Query
command.