User's Manual

CAEN UHF RFID Readers Communication Protocol - Technical Information Manual
15
Code
Description
Comp.
0x78
CheckReadPointInSource: permits to verify if a readpoint belongs to a givens source.
Parameters:
ReadPointName: [in] the name of the readpoint.
SourceName: [in] the name of the source.
Value: [out] a Boolean value meaning the belonging to the source.
ResultCode: [out] the result code.
A928EU
A948EU
A949EU
A528
R1230CB
R1260I
R1260U
0x79
GetProtocol: permits to get the protocol in use.
Parameters:
Protocol: [out] the protocol in use.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828AEU
A829EU
A949EU
A528
R1230CB
R1260I
R1260U
0x7A
SetNetwork: permits to set up the network configuration.
Parameters:
IPAddress: [in] the IP address to set.
IPNetMask: [in] the IP netmask to set.
IPGateway: [in] the IP gateway to set.
ResultCode: [out] the result code.
A928EU
A948EU
0x7B
SetDESB: permits to enable or disable the “Data Exchange Status Bit” handling during
the anti-collision algorithm when ISO 18000-6b air protocol is in use.
Parameters:
DESBEnable: [in] enable/disable value.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828AEU
A829EU
A949EU
0x7C
GetFirmwareRelease: permits to get the firmware revision.
Parameters:
FWRelease: [in] the firmware release.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828AEU
A829EU
A949EU
A528
R1230CB
R1260I
R1260U
0x7D
GetDESB: permits to get the current setting of the “Data Exchange Status Bit” handling.
Parameters:
DESBStatus: [in] enabled/disabled value.
ResultCode: [out] the result code.
A928EU
A948EU
A828EU
A828AEU
A829EU
A949EU
0x7E
ProgramID: permits to program the ID in the EPC Class 1 Gen 1 tags.
Parameters:
SourceName: [in] the name of the source.
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
EPCPWD: [in] the EPC password to set.
Lock: [in] a Boolean value; TRUE = lock the ID. FALSE = do not lock.
ResultCode: [out] the result code.
A928EU
A948EU