User's Manual

CAEN UHF RFID Readers Communication Protocol - Technical Information Manual
25
CAEN A928EUEU and A948EUEU UHF RFID Reader protocol has various configuration parameters; in the following table
are summarized the default values.
Parameter
Default value
IP Address
192.168.0.125
IP Netmask
255.255.255.0
IP Gateway
192.168.0.1
Sources
“Source_0”, “Source_1”, “Source_2”, “Source_3”
Readpoints
“Ant0”, “Ant1”, “Ant2”, “Ant3”
Baud Rate
115200
Data Bits
8
Stop Bits
1
Parity
None
Flow Control
None
Tab. 4.1: A928EUEU and A948EUEU Configuration parameters default values
The default composition of sources for A928EUEU and A948EUEU reader is the following:
Source
Readpoints
Source_0
Ant0
Source_1
Ant1
Source_2
Ant2
Source_3
Ant3
Tab. 4.2: A928EUEU and A948EUEU Default composition of sources
CAEN A828EU A828AEUEU, A829EUEU, A946EUEU and A949EUEU UHF RFID Reader protocol has various configuration
parameters; in the following table are summarized the default values.
Parameter
Default value
Sources
“Source_0”
Readpoints
“Ant0”
Baud Rate
115200
Data Bits
8
Stop Bits
1
Parity
None
Flow Control
None
Tab. 4.3: A828EU A828AEUEU, A829EUEU, A946EUEU and A949EUEU Configuration parameters default values
The default composition of sources for the A828EU A828AEUEU, A829EUEU, A946EUEU and A949EUEU reader is the
following:
Source
Readpoints
Source_0
Ant0
Tab. 4.4: A828EU A828AEUEU, A829EUEU, A946EUEU and A949EUEU Default composition of sources