User's Manual

The reader is available in two models: APPLE or HID (see § Ordering Options page 10):
 APPLE model
 EASY2RD profile: the reader can be connected to all the devices supporting the Bluetooth SPP profile
and to iOS devices.
 HID profile: not supported.
 HID model
 EASY2RD profile: the reader can be connected to all the devices supporting the Bluetooth SPP profile
but not to iOS devices.
 HID profile: the reader can be connected to all the devices supporting the Bluetooth HID profile
(keyboard emulation), including iOS devices.
For more information about EASY2RD and HID profiles, please refer to § PROFILE paragraph page 43.
Front panel
The qIDmini R1170I front panel houses the following LEDs and buttons (see figure below):
Fig. 1.2: qIDmini R1170I Front Panel
No. Name Description
1 Display LCD Alphanumeric (8 chars x 2 lines)
2 Link LED
Indicates the Bluetooth and USB/charger connection (see § Tab. 1.3: qIDmini R1170I
Bluetooth LED status table)
3 Power LED
Indicates the reader status and battery level (see § Tab. 1.2: qIDmini R1170I Power LED
Status Table)
4 Trigger button
Inventory mode: press to perform an inventory cycle (hold down the button to repeat
inventory cycles)
Menu mode: quick press to scroll, hold down for a few seconds to activate an option
5 Power button
Press the button to switch on the reader, press for at least 2 seconds to switch it off
Menu mode: press to return to the main menu
Tab. 1.1: qIDmini R1170I Front Panel LEDs and Buttons
Introduction - qIDmini Technical Information Manual 7