User's Manual

PROTOCOL SPECIFICATION - CAEN UHF RFID Readers Communication Protocol 11
Command codes
Note: Some commands have been renamed to align the nomenclature in this manual and in the CAEN RFID API
Reference Manual. See § Tab. 2.4: Renamed Commands Table pag. 25 to know the equivalence between old and new
name of the renamed commands.
Note: Some commands have optional parameters. See § Tab. 2.3: Commands with Optional Parameters Table pag. 24
to know the CAEN RFID readers that support them.
For the compliance of the command codes with the obsolete readers, please refer to the previous revisions of the
manual that can be downloaded in the Manuals and Documents area of the CAEN RFID web site.
Code
Description
Comp.
0x12
RawReadIDs: permits to get all the tag’s Ids that are under the RF field of the selected
source [obsolete].
Parameters:
SourceNameIn: [in] the name of the source to use.
SourceNameOut: [out] the name of the source used.
ReadPointName: [out] the name of the readpoint.
TimeStamp: [out] the time at which the tags are detected.
TagIDLen: [out] the ID length of the tags detected.
ListOfIDs: [out] the list of Ids detected from the source.
ResultCode: [out] the result code.
Note: out parameters are repeated for each readpoint in the source.
A941M