User's Manual

PROTOCOL SPECIFICATION - CAEN UHF RFID Readers Communication Protocol 16
Code
Description
Comp.
0x83
SetRS232: permits to modify the settings of the serial port.
Parameters:
Baudrate: [in] the baud rate value.
Databits: [in] the data bits setting.
Stopbits: [in] the stop bits setting.
Parity: [in] the parity setting.
Flowctrl: [in] the flow control setting.
ResultCode: [out] the result code.
A941M
R1230CB
R1260I
R1260U
R1260E
R4300P
R4301P
R1170I
R1170INF
R1270
R1250I
0x84
SetDateTime: permits to modify date and time.
Parameters:
Datetime: [in] the date and time to set up.
ResultCode: [out] the result code.
A941M
0x85
GroupSelectUnselect: obsolete (please refer to the previous revisions of the manual
that can be downloaded in the Manuals and Documents area of the CAEN RFID web
site)
0x86
GetIO: permits to read the current status of the I/O lines.
Parameters:
IORegister: [out] the status of the I/O lines.
ResultCode: [out] the result code.
A941M
R1230CB
R1260I
R1260U
R1260E
R4300P
R4301P
A528B
R1240I
R1240IE
R1240IU
R1170I
R1170INF
R1270
R1250I
0x87
SetIO: permits to set the level of the output lines.
Parameters:
IORegister: [in] the value to set to the output lines.
ResultCode: [out] the result code.
A941M
R1230CB
R1260I
R1260U
R1260E
R4300P
R4301P
A528B
R1240I
R1240IE
R1240IU
R1170I
R1170INF
R1270
R1250I
0x88
SetIODirection: permits to define the direction of the I/O lines.
(0 = input; 1 = output)
Parameters:
IORegister: [in] the direction to set to the I/O lines.
ResultCode: [out] the result code.
A941M
R1230CB
R1260I
R1260U
R1260E
R4300P
R4301P
A528B
R1240I
R1240IE
R1240IU
R1170I
R1170INF
R1270
R1250I