User's Manual

PROTOCOL SPECIFICATION - CAEN UHF RFID Readers Communication Protocol 18
Code
Description
Comp.
0x94
E119ProgramID: obsolete (please refer to the previous revisions of the manual that can
be downloaded in the Manuals and Documents area of the CAEN RFID web site)
0x95
ProgramID_EPC_C1G2: permits to write the EPC in a Class 1 Gen 2 tag.
Parameters:
SourceName: [in] the name of the source to use.
TagIDLen: [in] the ID length of the tag (must be an even number).
TagID: [in] the EPC to write into the tag memory.
G2NSI: [in] the EPC numbering system.
G2Password: [in] the EPC Access password (optional).
ResultCode: [out] the result code.
(See § Tab. 2.3: Commands with Optional Parameters Table pag. 24 to know the CAEN
RFID readers that support them)
A941M
R1230CB
R1170I
R1170INF
R1270
R1250I
0x96
ReadTagData_EPC_C1G2: permits to read data from anyone of the Gen2 tag memory
banks.
Parameters:
SourceName: [in, optional] the name of the source to use.
Bank: [in] the number of the bank to use (optional).
TagAddress: [in] Filter Mask Start Address (optional)
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
MemoryBank: [in] the memory bank.
TagAddress: [in] the address where to read the data.
Length: [in] the number of bytes to read (must be an even number).
TagValue: [out] the data read from the tag memory.
G2Password: [in] the EPC Access password (optional).
ResultCode: [out] the result code.
(See § Tab. 2.3: Commands with Optional Parameters Table pag. 24 to know the CAEN
RFID readers that support them).
A941M
R1230CB
R1260I
R1260U
R1260E
R4300P
R4301P
A528B
R1240I
R1240IE
R1240IU
R1170I
R1170INF
R1270
R1250I
0x97
WriteTagData_EPC_C1G2: permits to write data into anyone of the Gen2 tag memory
banks.
Parameters:
SourceName: [in, optional] the name of the source to use.
Bank: [in] the number of the bank to use (optional).
TagAddress: [in] Filter Mask Start Address (optional)
TagIDLen: [in] the ID length of the tag.
TagID: [in] the ID of the tag.
MemoryBank: [in] the memory bank.
TagAddress: [in] the address where to write the data.
Length: [in] the number of bytes to write (must be an even number).
TagValue: [in] the data to write to the tag memory.
G2Password: [in] the EPC Access password (optional).
ResultCode: [out] the result code.
(See § Tab. 2.3: Commands with Optional Parameters Table pag. 24 to know the CAEN
RFID readers that support them)
A941M
R1230CB
R1260I
R1260U
R1260E
R4300P
R4301P
A528B
R1240I
R1240IE
R1240IU
R1170I
R1170INF
R1270
R1250I