Manualshelf

User's Manual

ManualsBrandsCAEN RFID ManualsElectronicsR1170IUNFHP - qIDmini Keyfob UHF NF RFID Reader
21222324252627282930
qIDminiNF HID PROFILE - qIDminiNF Technical Informa tion Manual 28
4 qIDminiNF HID PROFILE
Introduction
Choosing the HID profile option you select the keyboard emulation protocol.
For details on the available profiles and on the activation method please refer to § PROFILE paragraph page 43.
Note that the reader can be connected through the HID profile to all the devices, including the iOS ones.
HID profile options
To enter the HID profile options, turn on the reader, the display shows information on the currently active profile (HID)
and then the message "ready" informs you that the reader is operating. Press quickly the power button to enter the
HID profile options:
− FORMAT
− DISPLAY
− APPLEKB
FORMAT
In the HID profile you can set different EPC format, while using the EASY2READ profile it is not possible to change the
HEXADECIMAL EPC format.
• HEX: The RFID EPC string is represented by 24 characters
• ASCII: The RFID EPC string (96 bits long) is represented by 12 characters
The currently active format is marked with an asterisk. By default the EPC HID format is set to “HEX”.
To activate a different format, scroll through the FORMAT options by pressing quickly the trigger button until HEX or
ASCII is displayed. Hold down the trigger button for a few seconds, the chosen option will begin to flash. Once
activated, the device returns to the main menu.
DISPLAY
Hold down the trigger button to enter the Display Option:
1. SCROLL:. Flowing text on display.To enable/disable the display scroll, hold down the trigger button for a few
seconds. The chosen option will begin to flash. Once activated, the device returns to the main menu.
The currently active state is marked with an asterisk. By default the display scroll is enabled and the flowing
text on the display shows the whole EPC of the tag.
If the display scroll is disabled, the display shows the last 8 characters of the tag EPC.
APPLEKB
Hold down the trigger button to send a request to iOS devices in the read range of the qIDminiNF reader to open the
virtual keyboard on the iOS device.