Manualshelf

User's Manual

ManualsBrandsCAEN RFID ManualsElectronicsR1170IUNFHP - qIDmini Keyfob UHF NF RFID Reader
31323334353637383940
qIDminiNF OFFLINE PROFILE - qIDminiNF Techni cal Informa tion Manual 39
VIEWTAG
This option shows the list of the read tags during the last scan. Hold down the trigger button to enter this option. Than
press quickly the trigger button to scroll the EPC code of the read tags.
BTSCAN
The BTSCAN option is used to identify the Bluetooth device for the download of stored data.
The BTSCAN searches for the active Bluetooth devices within the read range of the reader.
To activate the discovery of active Bluetooth devices, hold down the trigger button. After about 5 seconds, the reader
shows the list of active Bluetooth devices.
To scroll through the active Bluetooth devices list, press quickly (1 time) the trigger button.
To return to the main menu, quickly press the power button.
The currently Bluetooth device is marked with an asterisk.
You can activate only one Bluetooth device at a time.
To activate a different Bluetooth device, scroll through the list by pressing quickly the trigger button until the desired
Bluetooth device and then hold down the trigger button for a few seconds: the name of the Bluetooth device will begin
to flash. Once activated, the device returns to the main menu.
LOGOPT
Hold down the trigger button to enter the Log Option:
1. TIMESTP: Time Stamp permits to associate date and time to the EPC of the read tags. To enable/disable the
TimeStp, hold down the trigger button for a few seconds. The enable (or disable) option will begin to flash. Once
activated, the device returns to the main menu.
The currently active state is marked with an asterisk. By default the TimeStp option is disabled.
DISPLAY
Hold down the trigger button to enter the Display Option:
1. SCROLL: Flowing text on display. To enable/disable the display scroll, hold down the trigger button for a few
seconds. The chosen option will begin to flash. Once activated, the device returns to the main menu.
The currently active state is marked with an asterisk. By default the display scroll is enabled and the flowing text
on the display shows the whole EPC of the tag.
If the display scroll is disabled, the display shows the last 8 characters of the tag EPC.