User's Manual

RESET THE QIDMININF READER -qIDminiNF Technical Informa tion Manual 40

6 RESET THE qIDminiNF READER

To reset the reader, press the power and the trigger buttons (see § Fig. 1.2: qIDminiNF R1170INF Front Panel page 7)

simultaneously for about six seconds and then release the buttons. The reader restarts by itself.

Warning: Note that the reader SHALL NOT be connected to the USB port or to the battery charger during the reset,

otherwise the reader enters in the firmware upgrade state. If, by mistake, you entered in the firmware upgrade state,

in order to restore the normal reader operation, disconnect the USB cable and repeat the reset procedure.