Product Info

HADRON R4320C- Hadron Technical Information Manual 17
2) Power on the board for at least 5s.
3) Remove the power supply.
4) Place the jumper in the original position.
5) Connect the USB or the RS232 cable to the board.
6) Power on the board.
7) Launch the R4320C Upgrade Tool and click on Next button.
8) Select the COM port related to the device (the COM address of RS232 in case of use of the serial interface, the
Bossa Program Port assigned by OS in case of use of the USB interface). Note that the driver identification name
depends on the OS type version.
9) Select the R4320C FW image file.
10) Click on Upgrade Firmware button.
11) Wait for the progress bar to be full.