Product Info

EXTERNAL INTERFACE DESCRIPTION - Quattro Technical Information Manual 14
When a valid input is present on the GPI0 pin, a check “۷” appears in the Status box at the GPIO 0:
Output signal
The OUTPUT1.1 – OUTPUT1.2 and OUTPUT2.1 – OUTPUT2.2 pins are the terminals of a normally open
dry contacts.
By connecting to the CAEN RFID Easy Controller Software, Tools-I/O management section, you can close
the contact by removing the check from the Status box related to GPIO 2 and GPIO 3 and then press the
Apply button.
OUTPUT1.1 – OUTPUT1.2 correspond to GPIO2 of the Easy Controller software
OUTPUT2.1 – OUTPUT2.2 correspond to GPIO3 of the Easy Controller software