Installation Instructions

6 31-11072-4

INSTALLING THE COOKTOP

VERTICAL CLEARANCE

Install an approved junction box where it will be

easily reached through the front of the cabinet where

the cooktop will be located. The cooktop conduit is

4 feet long.

IMPORTANT: The junction box must be located

where it will allow considerable slack in the conduit

for serviceability.

ATTACH FOAM TAPE

Apply the foam tape around the outer edge of the

glass. Do not overlap the foam tape.

NOTE: On ZEU30 and ZEU36 models, apply the

foam tape around the outer edge of the glass on the

sides and rear of the unit only.

MOUNTING PARTS

Remove the hold down brackets and screws from the

literature package.

Screw the hold down bracket to the side of the

cooktop unit. Repeat for opposite side of cooktop.

PROTECT SURFACE OF COOKTOP

Place a towel or tablecloth onto the countertop. Lay

the cooktop upside down onto the protected surface.

Install junction box so that it

can be reached through the

front of the cabinet.

16”

Min.

Bottom of Cooktop

Cloth under Cooktop

Bottom of Cooktop

Foam Tape

Cooktop

Glass

Mounting Screw

Hold Down

Bracket

Pre-Drilled Hole

Bottom of Cooktop

Cooktop Glass

Foam Tape