Use and Care / Installation Manual

31-2000814 Rev. 1 15
OPTIONAL ACCESSORIES—12” HIGH BACKSPLASH
UX12BS36PSS Accessory Installation
This kit provides for the installation of a 12” high
backsplash for 36” Professional Ranges and Rangetops.
TOOLS AND MATERIALS REQUIRED
■Glovestoprotectagainstsharpedges
■T-15and#2Phillips
screwdrivers
■Drillwith3/32”and
9/64”bits
■Safetyglasses
■Level
■Pencil
This Kit Includes
■Wallsupportpanel
■Coverpanel
■Hardwarepackagewith
 –5StainlessSteelTorx15
#8self-tappingscrews
 –5Phillips#2panheadwood
#10screws
INSTALL 12” BACKSPLASH
WARNING
This backsplash must be securely
fastenedtothewall.Failuretodosocouldresultin
damage or personal injury.
■Installandleveltherangeorrangetopandthe
range hood according to the installation instructions.
■Removethebacksplashpackagingandprotective
film.
■Usealeveltopencilahorizontallineonthewall,1/8”
abovetherangeorrangetop.The1/8”gapallowsthe
coverpaneltooverlapthewallsupportpanel.
■Locatewallstudsoneachside.Wherestudsarenot
available,plantousewallanchors(notprovided).
■Alignthewallsupportpanelonthemarked
horizontal line and centered left to right.
■Thewallsupportpanelmustbesecuredtothewall
atall4corners.Usewoodscrews(provided)orwall
anchors (not provided) to secure the support panel
tothewall.
■Placethecoverpaneloverthewallsupportpanel
andsecurewithTorxscrews(provided).Install2
screwsoneachside.
Wall Support Panel
Cover Panel
Hardware
Package
761Dia65
Install4WoodScrews
Install T-15
Screws
Wall
Support
Panel
Wall Support
Panel
Cover Panel
Center
Arrow
1/8”