Use and Care / Installation Manual

31-2000814 Rev. 1 7
Installation
1
REMOVE PACKAGING
CAUTION
Stand clear. The ends of the cut metal
bandingmaysnaptowardyou.
■Cutthemetalbanding.Liftthecartonstraightup.
■Locatethetworunnerstripsfromthetopofthe
packaging.Thesestripswillbeusedtoprotectthe
kitchen floor during installation.
■Removecornerposts.Disposeofpackagingmaterials.
■Removegrill/griddlecovers,grillgrateandburnergrates.
■Liftoffburnercapsandremovefoampad,thenliftoff
burner heads and remove foam pad.
■Openovendoor(s)andremovepackaging.Remove
shelfholdingbroilerpan,tape,literaturepackage,shelf
lubricant and probe.
CAUTION
Doorsandpassagewaysleadingtothe
installation location require at least 32” opening. If the
openingislessthan32”,theovendoor(s)andcontrol
knobs must be removed.
REMOVE THE OVEN DOOR(S) ONLY IF NECESSARY
tomovetherangethroughthedoorways.Toprevent
damagetothesidesoftherange,itwillbenecessaryto
pad the corners beneath the straps on the hand-truck.
To remove the oven door(s):
■Toremovetheovendoor(s):
■Fullyopenthedoor.
■Eachhingehasahingelock.Pullthehinge.
■Firmlygraspthedooratthetopsides.
■Closethedoortothenear-verticalposition.
■Liftthedoorupandpullstraightout.
Remove Foam Pads
Hinge
Lock