Installation Instructions

Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: GEAppliances.ca
31-1000631 Rev. 0 10-21 GEA
NOTE: If the door swing is going to be changed, please complete prior to installing the door panel per the directions
in your Owner’s Manual. Also, if the door panel did not come with a handle, be sure to install one (ordered separately)
before installing door panel to inner door.
Installation
Instructions
Door Panel
WARNING
To reduce the risk associated with choking, do not allow children under 3 years of age to have
access to small parts during the installation of this product.
Installing the Door Panel
1. Remove the gasket from the inside of the door and
retain for later use.
2. Identify the 4 pry tabs on the top and bottom
decorative door trims.
3. Pry on each tab and pull down on the trim as shown
until you can remove each of the trims.
4. Remove any plastic protective covering from the
stainless door panel
5. Place the door panel onto the outside of the door and
secure it with 6 machine screws. (Provided in Door
Panel Kit)
6. Snap the upper and lower trims back on the inner
panel.
7. Re-install the door gasket.
1
23
4