Quick Specs

Café Professional Series 30" Smart

Built-In Convection Double Wall Oven

CTD90DP2NS1 / CTD90DP3ND1 / CTD90DP4NW2

DIMENSIONS AND INSTALLATION INFORMATION

30" Double electric wall ovens are approved for installation above

27" and 30" warming drawers.

WHEN TO USE THE PEDESTAL RAILS: When replacing an older

GE Appliances 30" double wall oven with a new GE Appliances

model. Cutout Height =51-13/16" to 51-15/16". This is our traditional

cutout height.

WHEN NOT TO USE THE PEDESTAL RAILS: When replacing a 30"

double wall oven from another manufacturer (ie; Whirlpool) with a

new GE Appliances model. Cutout height = 50-1/4". You will need

to verify that the existing cutout matches the 50-1/4" dimension.

If the new GE Appliances 30" double wall oven is being

installed into new construction (ie; not a replacement), then the

recommended installation is to use the pedestal rails.

ATTENTION INSTALLER: Electric wall ovens are NOT approved

for installation with a plug and receptacle. They must be hard

wired into an approved junction box.

IMPORTANT: Before installing, consult installation instructions

packed with ALL products for current dimensional and

combination data.

Flanges toward

center of cutout

Top cutout

toward front

Attachment

screws

Dimension and installation information are shown in inches.

For answers to your Café™ product questions, visit our website at cafeappliances.com.

ADDITIONAL ACCESSORIES

CXWD0H0PMBZ

Brushed Bronze

2 handles

(Standard on Matte White)

CXWD0H0PMSS

Brushed Stainless

2 handles

(Standard on Matte Black)

CXWD0H0PMBT

Brushed Black

2 handles

CXWD0H0PMCU

Brushed Copper

2 handles