Use and Care / Installation Manual

22 49-2000706 Rev. 3

INSTALLATION INSTRUCTIONS

CONNECT DUCTWORK

A. Vented Installation

• Connect the house ducting to the top damper as

shown in Figure A.

• For back venting, connect the transition piece to the

back damper and the house ducting to the transition

as shown in Figure B.

• Seal all connections with duct tape.

CAUTION

Do not use sheet metal screws at

the transition to ductwork connection. Doing so will

prevent proper damper operations. Seal connection

with tape only.

B. Recirculation (non-vented) Installation

NOTE: A recirculation duct (WB34X30519), and

Charcoal Filter (UXCF91), are not included with the

hood and are necessary for recirculation installation.

1. Attach the recirculation duct to the duct cover

mounting bracket with screws provided.

2. Connect the ducting from the exhaust outlet on the

hood to the recirculation duct. Use duct tape to seal

the connections.

Installation Instructions

Ceiling

Figure A

House Ducting

Wall

House

Ducting

Duct

Transition

Figure B

Recirculation Duct

Duct Cover

Mounting Bracket

Use tape

(Do not use screws.)

1" = 2.5 cm; 1' = 0.3 m