User Manual

Using Your Espresso Machine

NOTE: Make sure the control knob is always in the neutral position when NOT using the

Steam and Hot Water functions.

NOTE: The steam wand swivels for easier use. DO NOT pull on steam wand.

CAUTION

To avoid possible burns to body parts and/or other injury from

hot steam, do not touch liquids or steam wand during or after steaming. Do not

remove pitcher until steaming is complete. Hold milk pitcher by the handle.

Steam

The Steam function can be used to steam milk and other liquids.

See the Tips section for techniques and recipes.

1. Turn the control knob on the front of the espresso

machine to Steam. Ensure the steam wand is

pointing towards the drip tray as it will clear out

some water during preheat. Once steam starts to

come out, switch the knob to neutral position and

quickly insert the wand into the milk. Proceed with

steaming process by turning the control knob back

to Steam.

NOTE: If there is a delay longer than a few seconds between heating and steaming, the

heating will shut o and need to be repeated.

2. Turn the control knob back to neutral when complete.

NOTE: Use a hot, wet cloth to wipe o steam wand after every use. It is also

recommended to purge the steam wand immediately after every use by quickly

turning steam back on for a short time.

NOTE: After every steam cycle your machine will automatically release internal

pressure as it is cooling down by slowly pumping access water and steam into the

drip tray. Steam coming out of the drip tray is normal during this process. DO NOT

remove the drip tray until the process is complete.

Hot Water

NOTE: If using the Hot Water function after steam, allow the machine to dispense excess

steam before using this function per note above.

NOTE: Hot water volume and temperature can be adjusted via the Smart HQ app.

1. Place your desired cup or milk pitcher provided under the steam wand.

2. Turn the control knob on the front of the espresso machine to Hot Water.

3. Fill your cup to your desired amount. If the dispense is not stopped manually by user,

the machine will continue to dispense until a programmed volume is set.

4. Turn the control knob back to neutral when complete.