Installation Instructions

8 31-2000021-1
Installation Instructions
CHECKLISTS
2
OPERATION CHECKLIST
A
Remove all items from the top of the cooktop
surface.
B
Turn on the power to the cooktop. (Refer to your
Owner’s Manual.) Verify that all surface burners
operate properly.
C
Check that the circuit breaker is not tripped nor
the house fuse blown.
D
Check that conduit is securely connected to the
junction box.
NOTE TO ELECTRICIAN:
The power leads supplied with this appliance are
UL recognized for connections to larger gauge
household wiring. The insulation of these leads
is rated at temperatures much higher than the
temperature rating of household wiring. The current
carrying capacity of a conductor is governed by the
wire gauge and also the temperature rating of the
insulation around the wire.
NOTE: ALUMINUM WIRING
•
WARNING
IMPROPER CONNECTION OF
ALUMINUM HOUSE WIRING TO THE COPPER
LEADS CAN RESULT IN A SERIOUS PROBLEM.
• Splice copper wires to aluminum wiring using
special connectors designed and UL approved
for joining copper to aluminum and follow
the manufacturer’s recommended connector
procedure closely.
NOTE: Wire used, location and enclosure of
splices, etc., must conform to good wiring practice
and local codes.
1
PRE-TEST CHECKLIST
A
Remove all protective film, if present, and any
stickers.
B
Check to be sure that all wiring is secure and
not pinched or in contact with moving parts.
C
Check level of appliance.
D
Check that the cooktop is properly grounded.