Owner's Guide

8 49-2000573 Rev. 2
USING THE RANGE: Surface Units
Surface Units
How Induction Surface Cooking Works
The elements beneath the cooking surface produce a
magnetic field that generates heat in ferrous metal pans
that are in close proximity.
The cooking surface itself does not heat. Heat is
produced in the cooking pan, and cannot be generated
until a pan is placed on the cooking surface.
When the element is activated, the pan begins to heat
immediately and in turn heats the contents of the pan.
Magnetic induction cooking requires the use of cookware
PDGHRIIHUURXVPHWDOV²PHWDOVWRZKLFKPDJQHWVZLOO
stick, such as iron or steel.
Use pans that fit the element size. The pan must be large
enough for the element to detect the pan and be able to
deliver full power.
The cooktop will not operate if a very small steel or iron
utensil, such as a steel spatula, cooking spoon, knife
or other small utensil, is placed on the cooking surface
when the unit is turned on.
CAUTION
Ŷ 7KHLQGXFWLRQFRRNLQJHOHPHQWVPD\DSSHDUWREHFRRO
while turned ON and after they have been turned OFF.
The glass surface may be HOT from residual heat
transferred from the cookware and burns may occur.
Ŷ '2127728&++27&22.:$5(RU3$16GLUHFWO\
with hands. Always use mitts or pot holders to protect
hands from burns.
Ŷ '21276/,'(FRRNZDUHDFURVVWKHFRRNWRSVXUIDFH
Doing so may permanently damage the appearance of
the ceramic cooktop.
Operating the Cooktop Elements
WARNING
FIRE HAZARD: Never leave the
range unattended with the cooktop on. Keep
flammable items away from the cooktop. Turn off all
controls when done cooking. Failure to follow these
instructions can result in fire, serious injury or death.
Before using the cooktop for the first time, clean it with
ceramic cooktop cleaner. This helps protect the top and
makes cleanup easier.
Throughout this manual, features and appearance may
vary from your model.
Place your Induction designed cookware on the cooking
surface. Push the knob in and turn in either direction to
the setting you want.
A knob indicator light will glow when any surface unit is on.
For glass cooktop surfaces:
A HOT COOKTOP indicator light will:
Ŷ FRPHRQZKHQWKHXQLWLVKRWWRWKHWRXFK
Ŷ VWD\RQHYHQDIWHUWKHXQLWLVWXUQHGRII
Ŷ VWD\RQXQWLOWKHXQLWLVFRROHGWR
approximately 150°F.
At both OFF and HI the control clicks into position. You may hear slight
clicking sounds during cooking, indicating the control is maintaining
your desired setting.
Be sure you turn the control knob to OFF when you finish cooking.
Use the minimum size pan for the element. The
pan material is correct if a magnet sticks to the
bottom.
Min. Size
Min. Size