Installation Guide
Café
™
20.2 Cu. Ft. Fully Integrated Installation
French-Door Bottom Freezer
CIP36NP2VS1
DIMENSIONS AND INSTALLATION
**PRODUCT CLEARANCES
The factory set 115° door swing can be adjusted to 90° if
clearance to adjacent cabinets or walls is restricted.
GROUNDING THE REFRIGERATOR
IMPORTANT—PLEASE READ CAREFULLY
FOR PERSONAL SAFETY, THIS APPLIANCE
MUST BE PROPERLY GROUNDED.
The power supply cord of this appliance is equipped with a
three-prong (grounding) plug which mates with a standard
three-prong (grounding) wall receptacle to minimize the
possibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
DO NOT UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO
CONNECT THE REFRIGERATOR TO A
2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD
WITH THIS APPLIANCE.
A - Overall Height
B - Height to Top of Case (in)
C - Unit Depth With Door Closed With handle (in)
D - Case Width (in)
E - Overall Width (in)
Approximate Shipping Weight (lb)
Net Weight (lb)
Overall
Weights & Dimensions
83 7/8
83 11/16
27 5/16
35 5/16
35 3/4
590
550
Power / Ratings
Volts/Hertz/Amps 115V 60Hz 20A
A
D
C
B
E
A - Overall Height
B - Height to Top of Case (in)
C - Unit Depth With Door Closed With handle (in)
D - Case Width (in)
E - Overall Width (in)
Approximate Shipping Weight (lb)
Net Weight (lb)
Overall
Weights & Dimensions
83 7/8
83 11/16
27 5/16
35 5/16
35 3/4
590
550
Power / Ratings
Volts/Hertz/Amps 115V 60Hz 20A
A
D
C
B
E
36" (91.4)
25 15/16" (65.9)
23 5/8" (60.0)
2 9/16"
(6.5)
34 7/16"
(87.5)
*73 3/8"
(186.4)
*29 9/16"
(75.1)
*4 5/16"
(11.0)
SIDE VIEWFRONT VIEW
*83 1/2"
(212.1)
35 5/16" (89.7)
Case width
21 5/8"
(54.9)
TOP VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
**Dim A
** These refrigerators are equipped with a 3 position door stop. The factory set 115º door swing
can be adjusted to 90º if clearances to adjacent cabinets or walls is restricted. Allow full 130º
door swings for pan removal. If the 90º door stop position is used, pan access is maintained,
but pan removal is restricted.
Door
Angle
90°
115°
** Dim A
4 3/4"
(12.1)
12" (30.5)
SIDE VIEW
43 3/4" (111.1)
43 3/4" (111.1)
46 3/8" (117.8)
44 1/16" (111.9)
41 7/16" (105.3)




