Product Specifications

Café™ 30" Five in One Oven
with 120V Advantium® Technology
CSB913P4NW2 / CSB913P2NS1 / CSB913P3ND1
For answers to your Café™ product questions, visit our website at cafeappliances.com.
WARRANTY
Parts warranty
Limited 1-year entire appliance
Limited 5-year magnetron tube
Labor warranty Limited 1-year entire appliance
Warranty notes See written warranty for full details
DIMENSIONS AND INSTALLATION INFORMATION
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Note: 2" minimum between cutouts when installed
above warming drawer or single wall oven.
Installation information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Note: Advantium 240 volt models cannot be
installed under 36 inches height.
Note: Use of the accessory drawer will replace
the bottom trim piece for applicable installations.
Please see installation instructions for full details.
1" MIN. above toekick or adjust
to oven installation height
2" MIN. between cutouts
2-1/2" MIN. between cutouts
recommended - 2" MIN. required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN. 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16"
Conduit
(46" long)
Cabinet width
21-1/2"
To back
of Control
20-1/8"
29-3/4"
C
L
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
4-3/16"
25-1/4"
Cutout width
Junction
box location
17-1/2"
Cutout height
29-3/4"
20-1/8"
21-1/2"
Back of Control
Conduit
(48-1/2"
long)
B
30"
5" MIN. from
floor 1" MIN.
above toekick
A= Allow 1" overlap of oven over bottom edge of cutout, and allow
2-3/4" overlap at top edge of cutout.
B= Allow 3/4" - 2-1/8" for overlap of oven over side edges of cutout.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
A
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
23-1/2"
Cutout depth
29-3/4"
1" MIN. above toekick or adjust
to oven installation height
2" MIN. between cutouts
2-1/2" MIN. between cutouts
recommended - 2" MIN. required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN. 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16"
Conduit
(46" long)
Cabinet width
21-1/2"
To back
of Control
20-1/8"
29-3/4"
C
L
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
4-3/16"
25-1/4"
Cutout width
Junction
box location
17-1/2"
Cutout height
29-3/4"
20-1/8"
21-1/2"
Back of Control
Conduit
(48-1/2"
long)
B
30"
5" MIN. from
floor 1" MIN.
above toekick
A= Allow 1" overlap of oven over bottom edge of cutout, and allow
2-3/4" overlap at top edge of cutout.
B= Allow 3/4" - 2-1/8" for overlap of oven over side edges of cutout.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
A
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
23-1/2"
Cutout depth
29-3/4"
1" MIN. above toekick or adjust
to oven installation height
2" MIN. between cutouts
2-1/2" MIN. between cutouts
recommended - 2" MIN. required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN. 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16"
Conduit
(46" long)
Cabinet width
21-1/2"
To back
of Control
20-1/8"
29-3/4"
C
L
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
4-3/16"
25-1/4"
Cutout width
Junction
box location
17-1/2"
Cutout height
29-3/4"
20-1/8"
21-1/2"
Back of Control
Conduit
(48-1/2"
long)
B
30"
5" MIN. from
floor 1" MIN.
above toekick
A= Allow 1" overlap of oven over bottom edge of cutout, and allow
2-3/4" overlap at top edge of cutout.
B= Allow 3/4" - 2-1/8" for overlap of oven over side edges of cutout.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
A
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
23-1/2"
Cutout depth
29-3/4"