spec sheet

Café
™
30" Built-In Double
Convection Wall Oven
CTD90DP4MW2 / CTD90DP3MD1
© 2018 GE Appliances PC90238 08/18
For answers to your Café™ product questions, visit our website at cafeappliances.com.
WARRANTY
Parts warranty Limited 1-year entire appliance
Labor warranty Limited 1-year entire appliance
Warranty notes See written warranty for full details
DIMENSIONS AND INSTALLATION INFORMATION
Note: Cabinets installed adjacent to wall ovens must have an
adhesion spec of at least a 194°F temperature rating.
Door handle protrudes 2-1/2" from door face. Cabinets and
drawers on adjacent 45° and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for installation with a plug
and receptacle. They must be hard wired in accordance with
installation instructions.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
ADDITIONAL ACCESSORIES
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F – Overall width 29-3/4"
CT9550
22" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
9-1/2"
MAX.
47" to
bottom of
junction box
D
F
E
Conduit
48-1/2"
Junction box
location
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and ush
with sides of cutout
or solid bottom oor
Suitable
bracing
to support
runners
(must support 375 lbs.)
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Minimum
cutout location
12" (30.48 cm)
from the oor
Cutout height
51-13/16" MIN.
51-15/16" MAX.
21"
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F – Overall width 29-3/4"
CT9550
22" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
9-1/2"
MAX.
47" to
bottom of
junction box
D
F
E
Conduit
48-1/2"
Junction box
location
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and ush
with sides of cutout
or solid bottom oor
Suitable
bracing
to support
runners
(must support 375 lbs.)
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Minimum
cutout location
12" (30.48 cm)
from the oor
Cutout height
51-13/16" MIN.
51-15/16" MAX.
21"
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F – Overall width 29-3/4"
CT9550
22" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
9-1/2"
MAX.
47" to
bottom of
junction box
D
F
E
Conduit
48-1/2"
Junction box
location
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and ush
with sides of cutout
or solid bottom oor
Suitable
bracing
to support
runners
(must support 375 lbs.)
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Minimum
cutout location
12" (30.48 cm)
from the oor
Cutout height
51-13/16" MIN.
51-15/16" MAX.
21"
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F – Overall width 29-3/4"
CT9550
22" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
9-1/2"
MAX.
47" to
bottom of
junction box
D
F
E
Conduit
48-1/2"
Junction box
location
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and ush
with sides of cutout
or solid bottom oor
Suitable
bracing
to support
runners
(must support 375 lbs.)
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Minimum
cutout location
12" (30.48 cm)
from the oor
Cutout height
51-13/16" MIN.
51-15/16" MAX.
21"
CXWD0H0PMBZ
Brushed Bronze
2 handles
(Standard on Matte White)
CXWD0H0PMSS
Brushed Stainless
2 handles
(Standard on Matte Black)
CXWD0H0PMBT
Brushed Black
2 handles
CXWD0H0PMCU
Brushed Copper
2 handles