installation Guide

Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Before you call for service…
Problem Possible Causes What to Do
Low capacity Restricted drain or standing water in
the bin
Clean the air cooled condenser fins.
Clean the ice making system.
Check the drain line for kinks
No ice Switch is OFF Press the ON/OFF button to turn the
power on.
Electric breaker has been tripped Flip the electric breaker back on.
Water supply is low If the Check Water light is flashing Red,
the water supply is low.
Auger motor is not working or is over-
ORDGHGOLJKWVDUHÀDVKLQJ
Reset by pressing ON/OFF button. If this
doesn't reset the motor and the lights
continue to flash, call for service.
Time to Clean light is on Clean the ice making system follow-
ing directions in the Care and Cleaning
section.
Noise
The ice machine is designed for quiet operation but will make
some noise during the ice making cycle.
18