Instruction manual

English

Instructions for use and disposal

The appliance has been manufactured using high quality materials that can be

reused or recycled. Dispose of the appliance in a suitable waste collection centre

such as a public recycling yard.

First use or after a long period no operation

• Fill the tank with fresh, still water (either by ﬁ lling through the water tank cover or

removing the water tank).

• Plug in the appliance and turn it on.

• Make sure the lever is closed.

• Along with the A-B-C keys, the D indicator light will also alternately blink RED.

• Place a large container (at least 250 ml) under the dispensing spout.

• Press one of the buttons A-B-C. Wait for the machine to complete the priming cycle and

ﬁ ll with water (you will hear the pump noise during this period). The D indicator light will

switch off.

NOTE: If the buttons A-B-C and the D indicator light continue to blink after the ﬁ lling

Procedure/priming cycle has ended but not been successful, repeat the steps in

previous point.

• When the buttons A-B-C blink at the same time; the machine is warming up.

• When the buttons A-B-C turn on and remain steadily lit, rinse by pressing the C button.

• Press the button again to rinse a second time. Wait for the machine to complete the

rinse cycle.

• At the end of this operation, empty out any water from the used capsule drawer.