Instruction manual

English

Saving energy

The machine will automatically reduce consumption after 1 hour of inactivity.

Buttons A-B-C blink slowly and sequentially. To restore normal operating conditions,

press any button or raise the lever. The appliance will start warming up.

When buttons A-B-C turn on and remain steadily lit, the machine is ready for use.

Daily maintenance

• Remove the drip tray and used capsule drawer.

• Pull out the capsule drawer; empty and rinse it.

• Remove the grid. Empty the drip tray and rinse it out with water.

• Remove the water tank. Empty and rinse out the tank. The water tank is NOT dishwasher

safe.

• Gently turn the coffee dispensing spout clockwise by approximately 45° until it comes to a

stop, then remove it. Remove the top cover of the coffee dispensing spout and wash the

components in hot water.

• Remove the outside of the steam dispensing tube and wash it in hot water to remove any

milk residue. Clean the inside using a damp cloth.

Use a soft cloth and a neutral

detergent to clean the surfaces of the

appliance. Do not use jets of water to

clean the appliance.

The plastic parts of the machine,

including the water tank, are

NOT dishwasher safe.

Changing the gasket

CAUTION! If the gasket shows signs of wear (small cuts or cracks, warping)

you can replace it easily using the spare gasket supplied in the pack.

Perform the following operations only when the machine is cold; contact with

the inside surfaces of the machine could cause burns.

• Raise the lever.

• Find the gasket that was supplied in the original box.

• Remove the worn gasket, extracting it if necessary with the aid of a screwdriver.

• Insert the new gasket, ensuring that it ﬁ ts snugly in place.

• Close the lever.