Installation Guide

APRON FRONT STAINLESS STEEL SINK
Installation & Care Instructions
FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.
©2017 CAHABA. ALL RIGHTS RESERVED.
1
BEFORE YOU START
Cahaba recommends that all apron front sinks should be installed by an
experienced, professional installer.
IMPORTANT: The enclosed cutout template will create a counter top opening
with a minimal (1/8” or less) reveal. It is recommended that you discuss with
your installer and agree that the nished appearance is the desired effect.
Cahaba is not responsible for improper sink or counter top installations.
IMPORTANT: The cabinet must be installed, secured, plumb, and level. The
front sink apron must be secured to the front of the cabinet by attaching
fasteners through the cabinet front and into the support framing. Failure of this
step can lead to product damage.
IMPORTANT: Long screws may damage adjacent cabinets. Ensure the screws
are long enough to secure the support framing, but short enough not to go
through the walls of adjacent cabinets.
Cahaba apron front sinks should only be fastened to a solid surface counter
top (i.e. granite, Corian® or Silestone®).
A custom sink base cabinet and support framing is required for proper
installation. Cahaba recommends providing the cabinet maker with the actual
sink to be installed prior to cabinet fabrication.
Cahaba is not responsible for sink or counter top if damaged during
installation. Be sure to inspect the sink for damage prior to beginning
installation.
Metal edges may be sharp – use caution when handling.
Follow all local plumbing and building codes.
RECOMMENDED TOOLS
Tape Measure
Safety Glasses
Painter’s Tape
Saw
Level
Framing Square
Shims or Cabinet Fillers
Denatured Alcohol
Clamps
Construction Adhesive
Silicone Sealant
Support Framing Material (1 ¼”
(32mm) Max Thickness)
Screws (recommended by
counter top manufacturer)
CA231SB32
CA231132CA231232
FOR MODEL NUMBERS
CA231132
CA231232
CA231235
CA231SB32
CA231SB35

Summary of content (5 pages)